REPAIRS/MIANT OF JOINERY AND ALLIED WORKS IN OFFICE ACCN, TECH ACCN IN TECH AREA REPAIRS/MAINT OF INTERNAL WALLS INCLUDING PLASTERING, PAINTING AND ALLIED WORK AT MES AREA, REPAIRS/MAINT OF TILLING, PLASTERING AND ALLIED WORKS AT OMQ AREA AND REPAIR/

Amount

Taking down chowkats or frame, n.exc. 1.5 Sqm each with shutters (without taking off shutter from the frame), complete all as specified and directed.

Taking down chowkats or frame, exc 1.5 Sqm but n. exc. 4 Sqm each with shutters (without taking off shutter from the frame), complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n. exc. 2 Sqm each, complete all as specified and directed.

Taking down & refixing in the same opening shutters of any description exceeding 1 Sqm each & n.exc 2 Sqm each, complete all as specified and directed.

Taking down, resecuring, easing & in adjusting & refixing in same opening shutters of any description exc 2 Sqm each, complete all as specified and directed.

M & L for anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc including powder coating (minimum thickness of powder coating 50 micron), complete all as specified and directed.

M & L for anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. powder coating of any colour (thickness or powder coating not less than 50 micron), complete all as specified and directed.

M & L for anodised aluminium partitions,aluminium section including necessary joining cleats,glazing clips, ruber neoprene packing, anodised aluminum snap beading screws and fixing/fastening arrangement of Glass/PVC tiles/sheets, weight of section shall not less than 1.60 Kg/Rm powder coating of any colour including dismantling, complete all as specified and directed. Note :- (i)Thickness or powder coating not less than 50 micron. (ii) Colour shall be approved by GE.

S&F 6.3mm thick sheet glass, ordinary quality, in squares exc 0.5 Sqm each pane, complete all as specified and directed.

S&F 3mm thick PVC tiles/sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in vertical surface, complete all as specified and directed.

S&F aluminium mortice lock, vertical type, size 100mm (2 levers), complete all as specified and directed.

S&F in repair door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 81 kg, complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided and removing from site, complete all as specified and directed.

S&F steel ventilator, fixed type, with glazing bar, complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

M & L for preparing of newly steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed.

M & L for pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm, complete all as specified and directed

M & L for pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm, complete all as specified and directed

Supply and fix MS holdfast made up of FI 25 x 3mm conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.

Supply and fix 35mm thick, factory made 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats, complete all as specified and directed.

Supply and fix 35mm thick, factory made glazed and skelton shutters 2nd class hardwood open rebated and prepared to receive the glass, gauge etc (without sash bars) edges of framing plain chanfered or rounded fitted with cut and mitered beads for securing glass/guage etc, complete all as specified and directed.

S&F 30mm thick, 2nd class hardwood (factory made) flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

M & L for mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290), complete all as specified and directed.

S&F 100mm size mild steel butt hinges medium weight cold rolled, complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm long aluminium handles, cast type, anodised, complete all as specified and directed.

S&F aluminium alloy,anodised,sliding door bolt 250mm long with hasp, staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as specified and directed.

M & L for preparing of wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over one coat of primer, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors with necessary nails and fillets, complete all as specified and directed.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone concrete or brick surrounds,glazed with putty or fixed with beads, complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and directed.

S & F 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm each pane, complete all as specified and directed.

Repair to old damage rusted hinges of steel window inclunding supply of new hinge (any type), neccesary welding/scafolding/supports and touch-up painting to repaired portion, complete all as specified and directed.

S&F 25mm dia aluminium anodized droppery rod powder coated teak wood texture finish and wall thickness 1mm including brackets and end cup complete designed and patterened as approved, complete all as specified and directed.

M & L for plaster of any thickness in cement mortar (1:3), not exceeding 1.00 Sqm each patch, on brick walls, finished even and smooth without using extra cement including taking down old cement plaster on brick walls, concrete surfaces, raking out joints, hacking for key, scrubbing down with water etc and finished the surface matching or existing colour finish, complete all as specified and directed.

M & L for PCC (1:2:4), type B-0 (using 12.50mm graded crushed stone aggregate) as in padding finished even and smooth without using extra cement, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks, straight or curved on plane surface exc. 6m mean radius built in cement mortar (1:6), complete all as specified and directed.

Taking down cement plaster on brick/concrete surfaces of any description and in any position incl racking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:6) on fair faces of brick work conctete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick on ceiling and sofits of staircase in cement mortar (1:3) or concrete surface finished even and smooth without using extra cement, complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over one coat of wall primer, complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of wall primer over one coat of 1mm thick wall care putty, complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for complete removal of the existing old treatment on walls and applying two coats of distemper oil emulsion over a coat of of 2mm thick wall care putty on plastered surfaces preparetory to distemper including preparation of surfaces, complete all as specified and directed.

M&L for two coats of cement base paint over a coat of wall primer over old plastered surface including preparation of surface, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors with necessary nails and fillets, complete all as specified and directed. .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic tiles flooring, light shade, 10mm thick (square/rectangular) polished, area of each tile n.exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including screed bed or bedding layer of 15mm thick for laying floor finishes cement plaster (1:6), complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store, complete all as specified and directed.

S&F GI tubes 15mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors, complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and with the shade of tiles screed bed or bedding layer of mortar 15mm thick for laying floor finishes cement plaster (1:6), complete all as secified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 300x 200x 6-7mm/300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement as in dado, skirting etc match with the shade of tiles including rendering 10mm thick in CM (1:3) for backing coat of tiles, complete all as specified and directed.

M & L for 18-20mm thick granite slab work (of any type) (table rubbed and polished) in window-cills, cooking platforms including 15mm thick CM (1:4) screed bed and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including polishing and making hole in the platform for gas connection and nosing of the edges half round including demolition/dismantling existing finishes of any description, complete all as specified and directed.

M & L for 18-20mm thick granite slab work (of any type) (table rubbed and polished) as in skirting/dado including 15mm thick CM (1:3) baking coat and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including polishing & cutting and including demolition/dismantling existing finishes of any description, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thickness. (below or above ground level), complete all as specified and directed.

M & L 25mm thick plain cement concrete (1:2:4), type B-0 (using 12.50mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement, complete all as specified and directed.

M & L 40mm thick plain cement concrete (1:2:4), type B-0 (using 12.50mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement, complete all as specified and directed.

M & L for plain cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) cast in lintels up to 1.5m span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and directed.

Taking down carefully point wiring of any type, size and description from hard/ teak wood batten/through pipes/casing caping (light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and making good the disturbed surfaceof wall/floors, complete all as specified and directed.

M&L for point wiring complete as specified with 1100 V grade with 1.5 Sqmm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through including PVC casing capping of suitable size with concealed modular box suitable for logic modular switches, sockets, etc and logic modular white plates, sorroundings of suitable size as required at site with PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 Sqmm as earth wire connected to common earth dully for one light point/one fan point controlled by one, one way swtich., complete all as specified and directed. Note: - (i) Rate quoted shall include for cost of making MS box and concealed in wall including cutting and sinking of boxes and making good to the walls (no extra payment shall be made for the same) (ii) Provision of blank plates as per site requirement (no extra payment shall be made for the same)

All as per item No 64 here-in-above but one 3 pin 5 Amps socket point on the same board, complete all as specified and directed.

All as per item No 64 here-in-above but one 3 pin 5 Amps socket point on independent board, complete all as specified and directed.

All as per item No 64 here-in-above but point wiring with 4.0 Sqmm cable and 4.0 Sqmm earth continuity conductor, complete all as specified and directed.

All as per item No 64 here-in-above but for 2 way point wiring with cable of size1.5 Sqmm with 1.5 Sqmm earth wire suitable for light points at stair case (staircase lights), complete all as specified and directed.

All as per ser item No. 64 here in above but one bell/buzzer point controlled by one push button on the same board with other switches or independent, complete all as specified and directed.

Supply and fixing switch modular type, single pole, one way, 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing switch modular type, single pole, one way, and 15/16 Amps, one module, complete all as specified and directed.

Supply and fixing socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, two module, modular type, completes all as specified and directed.

Supply and fixing socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type, completes all as specified and directed.

Supply and fixing switch modular type, single pole, Bell push, 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing switch modular type, single pole, 2 way 5/6 Amp, one module, completes all as specified and directed

Supply and fixing fan step regulator modular type, two module, completes all as specified and directed.

Supply and fixing in repair bell musical tune type type AC, 230 volts, single phase, complete all as specified and directed.

Supply and fixing in repair ceiling rose of size 65 x 50mm surface bakelite 240 Volts three terminal, complete all as specified and directed.

M& L for point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLSH type drawn through and including PVC conduit of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick, one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLSH type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/fan at other end for one light point/one fan point controlled by one, one way swtich, complete all as specified and directed. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

All as per ser item No. 79 here in above but one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire, complete all as specified and directed.

All as per ser item No. 79 here in above but on independent board, complete all as specified and directed.

All as per ser item No. 79 herein above but with 4.0 Sqmm PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4.0 Sqmm FRLSH type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes, complete all as specified and directed.

All as per ser item No. 79 here in above but one light point controlled by 2 way switches, complete all as specified and directed.

All as per ser item No. 79 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent, complete all as specified and directed.

S&F in repair of switch piano flush button 5 Amp single pole one way 230 volts white finish, complete all as specified and directed.

S&F in repair of bell push, 230 volts white finish, complete all as specified and directed.

S&F in repair of switch socket outlet flush type 2 in 1, 3 pin 5 Amp 230 volts white/ivory finish, complete all as specified and directed.

SS&F in repair of switch socket multipurpose flush type 2 in 1 type (3 and 3 pin ) 5/16 Amps, 230V, AC white/ivory finish, complete all as specified and directed.

S&F in repair of switch piano flush button 5 Amp single pole 2 way 230 volts white finish, complete all as specified and directed.

S&F in repair decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser including 9 W LED lamp B22 base fittings, complete all as specified and directed. Make: Havell's Cat Part No. LHFOAJE1TN1I060 or equivalent in Philips/Wipro/Crompton

Supply and fix LED Lamp 9 Watt, complete all as specified and directed. Make: Bajaj Model No : LEDZ Plus Bulb or equivalent in Philips/Crompton /Wipro/Havell's

Supply and fixing LED lights fitting 1x 20 W, 220V,AC ,with driver, LED rod complete connecting up with 2/3 core flexible copper conductor cable of suitable size from ceiling rose complete including taking down FTL fitting any type and wattage, complete all as specified and directed. Make: Bajaj Model No: IVORA LED Batten 20 W CDL or equivalent in Havell's/Crompton /Philips/ Wipro .

Supply and fixing LED lights fitting 1x 10 W, 220V,AC ,with driver, LED rod complete connecting up with 2/3 core flexible copper conductor cable of suitable size from ceiling rose complete including taking down FTL fitting any type and wattage, complete all as specified and directed. Make: Bajaj Model No: IVORA LED Batten 10 W CDL or equivalent in Havell's/Crompton /Philips/ Wipro .

Supply and fix MCB DB TPN 4 way IP 43 protection, double door, concealed on wall, complete all as specified and directed.

Supply and fix MCB DB SPN double door 12 way, IP 43 protection concealed on wall, complete all as specified and directed.

Supply and fix MCB DB SPN double door 8 way, IP 43 protection concealed on wall, complete all as specified and directed.

Supply and fix MCB DB SPN double door 4 way, IP 43 protection concealed on wall, complete all as specified and directed.

S & F RCBOs for earth leakage, over load and short - circuit protection 32 Amp DP 100 mA, complete all as specified and directed.

Supply and fixing 240V, 10 KA 'C' series, curve miniature circuit breaker (MCB) of single poles (SP) and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

Supply and fix MCB SPN 6 to 32 Amp,10 KA 'C' series, complete all as specified and directed.

Supply and fix MCB 63 Amp 4 pole, 10 KA 'C' series, complete all as specified and directed.

Supply and fix power unit suitable for load max up to 3.5 KW including sockets 25 Amps, and six module box for mounting of power unit and power socket, complete as specified and directed.

M & L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 6 Sqmm drawn through in and including rigid PVC casing caping including 6 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Three runs of cables drawn in casing caping shall be measured as one length of sub main. (ii) PVC ccasing caping and its accessories is deemed to be included in this item rates.

M & L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 4.0 Sqmm drawn through in and including PVC casing caping including 4.0 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals, complete all as specified and directed. Note :- (i) Three runs of cables drawn in casing caping shall be measured as one length of sub main. (ii) PVC casing capping and its accessories is deemed to be included in this item rates.

Material & Labour in replacement of earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of (1:2:4) type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board, complete all as specified and directed.

Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type ultra slim with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cases of suitable size, complete all as specified and directed.

S&F in repair LED rod 10 Watt suitable for box type fitting / ceiling mounted fitting, complete all as specified and directed.

S&F in repair LED rod 18/20 Watt suitable for Box type fitting, complete all as specified and directed.

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and directed. Make: Bajaj Cat Part No: Maxima DX or equivalent in Havell's/Crompton/Orient/USHA

S&F in repair fan regulator electronic on existing socket type 230 volts, suitable for ceiling fan 1200/1400mm sweep, complete all as specified and directed.

S&F in repair decorative LED lighting including 4.5 W LED lamp base fittings, complete all as specified and directed. Make: Havell's Cap Part No.LHEXBZPNFN1W4X5 or equivalent in Philips/ Wipro/Bajaj/Orient

S& F in replacement decorative type lamp holder, angle batten type PVC/polycarbonate type white/Ivory suitable for pendant fittings, complete all as specified and directed.

S&F in repair LED 9 W inverter bulb B22 CDL, complete all as specified and as directed. Make: Havell's Cap Part No.LHLDEGEDML8O009/Bajaj Cat Part No : LEDZ Inverter Lamp 9 W or equivalent in Philips/ Wipro (Make: L&T MU-G10 DOL or equivalent model of make of Siemen's/ABB/Havells) Note: An amount of Rs.45994.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

Shri T P ANIL KUMAR

BHARAT ELECTRIC

M/S ROY ENTERPRISE

M/S BIJAY KUMAR SHIVA

M/S RATHIN ENTERPRISES

M/S. NARENDRA KUMAR GARG

M/S SARDAR MAL NAHATA