GE/PKT-31/2020-21 REPAIR TO FENCING, BOUNDARY WALLS, GATES, DRAINS, PATHS, STEEL RAILING AND PAINTING ETC IN ENTIRE SUJANPUR COMPLEX IN ZONE A AND B UNDER AOR OF AGE B/R-II UNDER GE (WEST) PATHANKOT

Amount

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

Dismantling of fencing wire of any type or any description, complete all as specified and directed.

Dismantling of Fencing Posts, strut (Wood or Steel or RCC) etc. of any section including taking out embeded portion and making good disturbed (Post embeded in natural ground ), complete all as specified and directed.

Dismantling of Fencing Posts, strut (Wood or Steel or RCC) etc. of any section including taking out embeded in concrete, brick and masonary portion and making good disturbed surface, complete all as specified and directed.

Demolition of brick work built in cement mortar,PCC bed blocks of mild steel posts, PCC coping/RCC Jalli etc complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick above or below ground level complete all as specified and directed.

M&L for fly ash Brick Work in CM 1:6 with Sub Class 'B' Bricks, using old size bricks, straight or curved on plan exc 6Mtr mean radius complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on any faces of brick wall finished even and smooth without using extra cement complete all as specified and directed.

S&F of mild steel work as in steel post and struts in fencing incl cutting top to shape, drilling holes, notching for wire etc, flat iron fillet (for securing wire mess etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 grade E-165, complete all as specified and directed.

S&F galvanized 2 strands, steel brabed wire 2.24mm dia barbed with 2mm dia barbes at 75mm spacings and straining and fixing to any type of standard rails including securing or taying at croses with and provision of galvanized mild steel wire complete all as specified and directed.

Fixing only galvanized 2 strands, steel brabed wire 2.24mm dia barbed with 2mm dia barbes at 75mm spacings and straining and fixing to any type of standard rails including securing or taying at croses with and provision of galvanized mild steel wire complete all as specified and directed. Note:- Old wire shall be used obtain from srl item no 2.00.

Excavation in postholes (or similar holes) each nexc 0.5 cu m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance nexc 50m and making good surface of any type of soil complete all as specified and directed.

M&L for PCC 1:3:6 Type C-2 (using 40mm graded stone aggregate) as in filling, foundation and mass concrete complete all as specified and directed.

Dismantling floor, hearth or wall tiling/granite slab including cement mortar bedding (But not backing) removing serviceable tiles and rubbish off the premises complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 finished even and fair to receive other treatment as tiles/granite etc complete all as specified and directed.

M&L for glazed ceramic joint less coloured/Stone finish/digital/printed/High lighter tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed.

M&L for granite stone slab 16 to 18 mm thick machine cut , in skirting /dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for preparation of old finished surface including brooming down or steel wire brushing scraping down smoke soot moulds, mass and efforescent salts and trading oil and greary spots and applying two coat of cement base paint complete all as specified and directed.

M&L for preparation of old steel surface including brooming down or steel wire brushing scraping down smoke soot moulds, mass and efforescent salts and trading oil and greary spots and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of cement base paint over and including one coat of primer complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coat of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

M&L for plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub base of floor 75mm thick complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in Floor/plinth protection 50 mm thick finished even and fair complete all as specified and directed.

M&L for cement concrete tile 30 cm x 30cm x 25 mm thick machine prerssed (coloured made in PVC mould with vibration process) set and jointed and pointed in neat cement slurry in floors with grey cement and pigment as reqd prelaminated for glossy finish over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for broken glass coping on top of wall in CM 1:3 including 20mm thick cement rendering complete all as specified and directed.

M&L for providing precast RCC Jalli 35 mm thick (Measured solid), including all moulding type B-0, 1:2:4 using 12.5mm graded stone aggregate set in cement mortar 1:4 complete all as specified and directed.

M&L for preparing of old treated surfaces of walls including cornices, pillasters, kerb stone by brooming down with steel wire brushing scrapping down smoke soot, moulds Moss and efflorescent salts and treating oily and greasy spots etc and applying two coats of exterior emulation apex/wheather shield paint coat of approved make exterior grade complete all as specified and directed.

M&L for preparation old treated surfaces of stone,concrete, asbestos cement or plaster surfaces over 10 cm girth or width, not otherwise described for and applying one coat of syntheic enamel paint etc. complete all as specified and directed.

S&F of welded steel wire fabrick not exc 4 Kg/Sqmtr to wood or steel members complete all as specified and directed.

M&L for 80 mm thick, M-40 Grade Machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 laid over and including 25 mm thick sand cushioning bed duly watered and consolidated complete all as specified and directed.

Taking out bushes at any height of the bldg and necessary scaffolding digging out roots from old brick walls, pouring chemical for burning roots etc and filling holes with CM 1:3 or PCC 1:2:4 type B-1 and removing of roots/ bushes to a distance n.exc 50 m and clearing the sites complete all as specified and directed.

S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridge complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring, surface finished even and smooth by using extra cement complete all as specified and directed .

Supply only 3mm thick and 38 mm wide glass strips as in floor complete all as specified and directed .

M&L for preparing of old treated surfaces of walls including cornices, pillasters, kerb stone by brooming down with steel wire brushing scrapping down smoke soot, moulds Moss and efflorescent salts and treating oily and greasy spots etc and applying one coats of exterior emulation apex/wheather shield paint coat of approved make exterior grade complete all as specified and directed.

S&F of precast PCC Kerbs stone machine pressed factory made of size 150 x 100 x 350 mm in PCC 1:2:4 type B-0 (Using 12.5 mm graded crushed stone aggregate) maximum depration from a straight edge, jointed in cement mortar 1:4, incl necessary earth work complete all as specified and directed.

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 14,380.00). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 5% (Five percent) of the accepted contract sum shall be delivered by the successful bidder immediately after the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249.

Ambika Construction Co

kay gee construction co

M/S RUDRA CONSTRUCTION CO

GANDOTRA CONSTRUCTION CO