REPAIR/ MAINT OF BUILDING SECURITY LIGHTS, MCB, DBS AND OTHER CONNECTED ITEMS AT MD / OTM AREA UNDER GE (W) COLABA, MUMBAI

Amount

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, casing caping with accessories and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including cover plate mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.60 mm thick mild steel sheet metal conforming to IS-5139 (pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch inculding taking out old point wiring carefully, complete all as specified and directed. Note:- Switch, socket and fan regulators to be measured and paid for separatel .

Supply and fixing in repair modular switch 1 way 10A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame and sunken metallic box, complete all as specified and directed.

Supply and fixing in repair ceiling rose surface bakelite 65x50mm, 3 terminal, complete all as specified and directed.

Supply and fix MCB Distribution board, 240 volts single pole and neutral, single door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 2 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down, complete all as specified and directed.

Supply and fix MCB DP, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity 'C' series including taking down old one, complete all as specified and directed.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's, complete all as specified and directed.

M&L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20mm dia in conduit ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 10 sqmm cable and one run of PVC conduit shall be measured as one RM.

Taking down old unserviceable burnt cable 1.5 sqmm to 6 sqmm size, complete all as specified and directed.

Taking down old unserviceable building security light/ street light/ flood light fitting of any type and any capacity and remove from its location all as specified and directed.

Taking down old unserviceable juncation box/ post top lantern, decorative outdoor fitting of any capacity and any type and remove from its location, complete all as specified and directed.

Supply and laying cable insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 1.5 Sqmm X 3 core for connecting up to post top lantern, garden light and looping box, complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated Copper stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 4 sqmm X 3 Core in service connections, complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated Copper stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 6 sqmm X 3 Core in service connections including lux, shddle, nut bolts, washers, complete all as specified and directed.

S&F looping box made out from fiber of size 300X200X112mm, out door type weather proof with locking arrangement & comprising of three phase connector and MCB SPN 25 Amp, with suitable bus bar arrangements and fix on pole with and including suitable size MS clamps, MS flat iron, cable glands, nut bolts, washers, complete all as specified and directed.

M&L PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) for making foundation of poles, complete all as specified and directed.

M&L PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) for making coping of Street light poles, complete all as specified and directed.

S&F LED Hanging light Aluminium housing polymer defuser and pleasant lumin output IP -65 of capacity 40 watt LED of 6000k/3000k as per requirment on site including neccesary brackets made out from GI pipe of suitable size and shape complete testing on ground, complete all as specified and directed.

S&F LED Post top lantern fitting of capacity 25 watts, 100 lumen per watt capacity of 6000k/3000k as per requirment on site including necessary fixing arrangement, complete all as specified and directed.

S&F LED intelligent smart sensor based auto dimmable LED street lights warm / warm white fitting with built in Dynamic Power Saving Device - DPSD that automatically switches off to 50% of the rated wattage on pre-set time interval of capacity 90 watt, luminaire fixture in IP 66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 100 luman per watt after all losses, protection against biological eye safety certification and UV, and including suitable bracket MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers, complete all as specified and directed.

S&F LED flood light fitting of capacity 150 watt, white / warm white luminaire fixture in IP 66 protection level output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours at L 70, protection against biological eye safety certification and UV and including suitable bracket and fixed to pole/ wall with two Nos. MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers etc. of 6000k/3000k as per requirment on site, complete all as specified and directed.

S&F LED flood light fitting of capacity 100 watt, white / warm white luminaire fixture in IP 66 protection level output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours at L 70, protection against biological eye safety certification and UV and including suitable bracket and fixed to pole/ wall with two Nos. MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers etc. of 6000k/3000k as per requirment on site, complete all as specified and directed.

S&F LED flood light fitting of capacity 50 watt, white / warm white luminaire fixture in IP 66 protection level output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours at L 70, protection against biological eye safety certification and UV and including suitable bracket and fixed to pole/ wall with two Nos. MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers etc. of 6000k/3000k as per requirment on site, complete all as specified and directed.

S&F LED building security light fitting 45 Watt, warm / warm white luminaire fixture in IP 66 protection level output of LED lamp efficiency minimum 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers, complete all as specified and directed.

S&F LED intelligent smart sensor based auto dimmable LED building security light fittings with brightening / dimming options of 30 % to 100 % of the rated wattage on sensing of movement / occupancy, with in 8 meter radius fitting of capacity 45 watt, luminaire fixture in IP 66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 120 luman per watt after all losses, protection against biological eye safety certification and UV, and including suitable bracket MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers, complete all as specified and directed.

S&F LED building security light fitting 60 Watt, luminaire fixture warm / warm white in IP 66 protection level output of LED lamp efficiency minimum 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers, complete all as specified and directed by Engineer-in-Charge.

S&F LED intelligent smart sensor based auto dimmable LED building security light white / warm white fittings with brightening / dimming options of 30 % to 100 % of the rated wattage on sensing of movement / occupancy, within 8 meter radius fitting of capacity 60 watt, luminaire fixture in IP 66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 120 luman per watt after all losses, protection against biological eye safety certification and UV, and including suitable bracket MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers, complete all as specified and directed.

M&L and replacement of for earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx6.3 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to 4 mm dia GI wire as earthing lead by means of bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering pipe 20mm dia medium grade with PCC chamber, MS funnel, wire gauge, CI cover with frame, 15 mm dia GI pipe light grade for protection of earth wire etc including necessary excavation in any type of strata, returning, filling removal of soil outside MD land, filling of charcoal and salt all as shown in electrical plate No. 3 of MES Sch Part I, connected to earthing test point, testing on completion, complete all as specified and directed.

S&F LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly, IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 25 Sqmm X 4 core, including taking out old cable, complete all as specified and directed.

S&F LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly , IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 16 Sqmm X 4 core, including taking out old cable, complete all as specified and directed.

Supply and fix LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly, IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 10 Sqmm X 4 core, including taking out old cable, complete all as specified and directed.

Supply and fix cable LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly, IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 10 Sqmm X 2 core, including taking out old cable, complete all as specified and directed.

M&L for cutting existing hard standing by manual method, 0.45 m width and 0.6 m in depth for inserting galvanized tubing for cable protection, refilling the same after laying of pipe, with soil, stone aggregate, etc. as obtained from excavation, making good top surface with 100mm thick PCC (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) and removal of excess material if any, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m depth and getting out in hard/dense soil for laying of cable/ GI pipe, complete all as specified and directed.

Returning, filling in including spreading levelling watering well ramming in layers not exc 25cm thick each layer, complete all as specified and directed.

Removing surplus soil to a distance outside MD land and depositing nexc. 50m where directed at a level not exceeding 1.5m above the starting point all in including removing balance debries from MD land, complete all as specified and directed.

Supply and laying High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 50mm dia for laying of cable protection complete to walls/ trenches/floor/ceilings, complete all as specified and directed by Engineer-in-Charge.

Supply and laying High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 25mm dia for laying of cable protection complete to walls/ trenches/floor/ceilings, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs of LED security light driver suitable for 25 watt to 40 watt of 100 lumen per watt IP 65 of 6000k/3000k as per requirment on site including necessary fixing arrangement, complete all as specified and directed.

S&F in repairs of LED security light driver suitable for 45/60watt of 100 lumen per watt IP 65 of 6000k/3000k as per requirment on site including necessary fixing arrangement, complete all as specified and directed.

S&F in repairs of LED security light driver suitable for 100 watt to 200 watt of 100 lumen per watt IP 65 of 6000k/3000k as per requirment on site including necessary fixing arrangement, complete all as specified and directed.

Supply and fixing LED Inverter Lamp B22/B27 bulb warm / warm white works on AC supply in normal mode and DC supply in inverter mode with inbuilt bettery back up of upto 4 hours, high efficilceeiny, high lumes output, including taking out old bulb/lamp, complete all as specified and directed.

Supply and fixing LED inverter Batten 18 watt works warm / warm white on AC supply in normal mode and DC supply in inverter mode with inbuilt bettery back up of upto 4 hours, high efficilceeiny, high lumes output, including taking out old fittings, complete all as specified and directed.

Supply and fixing LED inverter street light 45 watt warm / warm white works on AC supply in normal mode and DC supply in inverter mode with inbuilt bettery back up of upto 4 hours, high efficilceeiny, high lumes output and including suitable bracket MS clamps, complete all as specified and directed.

S & F LED Wall bracket decorative mirror light / name plate light fitting warm white /white type with lamp 12 Watt with IP 66 protection level complete with necessary connection, complete all as specified and directed.

Supply and fixing solar sensor / inverter wall bracket 10 watt warm / warm white suitable for foot path and including suitable bracket MS clamps, complete all as specified and directed.

Supply and fixing Solar street light 25 watt with sensor based auto dimmable LED street lights warm / warm white fitting with built in Dynamic Power Saving Device - DPSD that automatically switches off to 50% of the rated wattage on pre-set time interval of capacity 25 watt, luminaire fixture in IP 66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 100 luman per watt after all losses, protection against biological eye safety certification and UV, and including suitable bracket MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers, warm / warm white and including suitable bracket MS clamps, complete all as specified and directed.

Supply and fixing Solar street light 45 watt sensor based auto dimmable LED street lights warm / warm white fitting with built in Dynamic Power Saving Device - DPSD that automatically switches off to 50% of the rated wattage on pre-set time interval of capacity 45 watt, luminaire fixture in IP 66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 100 luman per watt after all losses, protection against biological eye safety certification and UV, and including suitable bracket MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers, warm / warm white and including suitable bracket MS clamps, complete all as specified and directed.

Supply and fix in repairs MCCB DB TPN 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting, complete all as specified and directed. (Note: (i) MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule. (ii) Copper thimble shall be used for connection of cable.

Supply and fixing in repair PVC Insulated and sheathed twin core Flat cables 1100 volts each core having single stranded aluminium conductor service cable size 4 sqmm fixing in saddling fittings on wall / flooring, complete all as specified and directed.

Material and labour Street light bracket, made out of 40 mm dia GI pipe (medium grade) 1.5m long bend to shape as required and welded and fixing in position including taking down old unserviceable bracket, complete all as specified and directed.

Material and labour Street light bracket, made out of 25 mm dia GI pipe, (medium grade) 1.5m long bend to shape as required and welded and fixing in position including taking down old unserviceable bracket, complete all as specified and directed.

S&F Three Phase street light time switch distribution board consisting with 40 Amps 3 pole power contactor and Analogue time switch including taking down old unserviceable time switch, complete all as specified and directed.

S&F Single Phase street light time switch with distribution board consisting with 16 Amps single pole power contactor and Analogue time switch including taking down old unserviceable time switch, complete all as specified and directed.

Supply and fix in repair of 3 pole power contractor 40 Amps 415 volts, complete all as specified and directed.

Supply and fix in repair of analogue time switch 3 module 24 hours progaramme, Programmable every 20 Min with battery backup of 100 Hrs, complete all as specified and directed.

Supply and fixing in repair factory made IP-65 (Dust and power jet Proof according to IEC 60529) opaque street light junction box of size 260 mm x 210 mmx116mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal , MCB SP 6 Amps rating 10 KA with locking arrangement and 2 Nos M40 size cable gland and one M32 size gland suitable up to 35 Sqmm cable etc, complete all as specified and directed.

S&F in repairs steel / Plastic perforated trucking system of size 100X30mm and providing sturdy nuts and bolts for connecting cable trucking steadily onto walls or lying in air steadily with help of metal frame, complete all as specified and directed.

M&L for calibration of street light / Building Security light including checking of light fittings, cleaning fittings, check connection and made serviceable as per site requirement, complete all as specified and directed by Engineer-in-Charge.

HINDUSTAN BUILDERS (BID ID -3413746)

S S ENTERPRISES (BID ID -3420020)

SHREE SHIV SHANKER ENTERPRISE (BID ID -3411930)

GUPTA ENTERPRISES (BID ID -3408032)

N.S.ENTERPRISES (BID ID -3411406)

SHRI SAI ENTERPRISES (BID ID -3420784)

Minal Engineers (BID ID -3411841)

AGRAWAL ASSOCIATES (BID ID -3413549)