GE(S)/M-25/2021-22

Amount

M&L PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as surface channels and drains complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in base/anchorage for fixing to trusses and the like, complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, side hung or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges 100mm long (2 Nos) and suitable handles as required, complete all as specified and directed.

S&F anodised aluminium door shutter, aluminium section weighing not less than 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, 2 Nos handle 150mm long and two Nos 150mm long aluminium tower bolts in each shutter, hinges, anonised aluminium snap beading, fixed with screws, complete all as specified and directed.

S&F anodised aluminium frame work for doors, ventilators, partition walls with one or more rebates including joining cleats for fixing etc, complete all as specified and directed.

S&F 35mm thick H.D.F prelaminated (Wenga/Teak colour) moulded shutter 35 mm thick puf (poly urathane foam) insulation with minium density 40kg/cum filled in between two HDF sheets of thickness 3.2 mm both & border covered with 10 mm thick PVC sheet as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011

M&L 35 mm thick single piece factory made wire gauge door shutter of ( steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG, size 19x19 mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement complete as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011

S&F Solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening at site, complete all as per specifications & drawing.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site, complete all as per specifications & drawing.

S&F Box type steel windows and ventilators, comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube, factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid separately under respective items of BOQ) with steel handle and steel peg stay dovetailed or welded including 2 Nos. tower bolts of 150mm long for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts etc. fixed in PCC blocks including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shown on drawing No. CEPZ/TD-354/09 sheet 1/3 to 3/3.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S&F 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed.

S&F "as in repair" double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

S&F Door closer hydraulically regulated, aluminium extruded section body, designation No. 3, universal type, complete all as specified and directed.

S&F "as in repair" 300mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.

S&F "as in repair" 20mm bore mild steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F "as in repair" stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

M&L for repair to steel rolling shutters upto smooth working condition including greasing, necessary welding and applying two coats of synthetic enamel painting after preparation of surface without taking down off shutters, complete all as specified and directed.

S&F tubular framed steel trusses (all as per pattern of existing dismantled trusses) made out of MS medium grade tube (ERW or induction butt welded ) upto 60mm bore conforming to I. S.1161-1979 grade St.-240 quality 'A', including welding of distance pieces, cleats, special shaped washer etc. and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.

S&F tubular purlin fixed independently made out of MS medium grade tube (ERW or induction butt welded ) upto 40mm bore conforming to I. S.1161-1979 grade St.-240 quality 'A', including welding of distance pieces, jointing plates etc and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc including dismantling of existing plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in ridge/valley , gutter or straight flashings etc including dismantling of existing plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.

M&L for 20mm thick cement plaster on roof top in cement mortar 1:4 on concrete surfaces, finished even and smooth without using extra cement including and mixing with WPC @ 0.200ltr/ 50 Kg bag of cement, complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of floors, complete all as specified and directed.

M&L for 40mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors laid in panels n. exc. 2.5 Sqm with top finished the surface even and smooth without using extra cement including glass dividing strips as per site requirement complete all as specified and directed

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L interlocking paver block of any shape of 60mm thickness, M-35 Grade, (EXCEPT BLOCKS) laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 80mm thickness, M-40 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for interlocking paver block of any shape of 60mm thickness, M-40 Grade, (EXCEPT BLOCKS) laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed.

M&L for Fly Ash glossy finished coloured chequered cement concrete tiles of size 30cm X 30cm X 25mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment to match as in floors over and including 15mm thick screed bed or bedding layers in CM 1:6, including dismantling existing floor, hearth or wall tiling of any description, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 10mm thick vitrified ceramic 'light shade' colour tile (Square or Rectangular), polished, area of each tile not exc 0.36 Sqm (Joint free) as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 and finished rough, including dismantling floor, hearth or wall tiling complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for marble work (Green / Black marble Bhaislana Zebra) 18-20mm thick (table rubbed and polished) as in cooking plateform, window cills, jambs, steps and like over and including 15mm thick screed in CM 1:4 including pointing with white cement (1:2) using marble dust with admixture of pigment to match the marble shade including rounding the exposed edges full round, and making hole for gas pipe, including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surfaces of ceiling / top and sides of chajjas/facia of roof projection including necessary formwork, finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces in patches in cement mortar 1:6, finished even and smooth without using extra cement including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 10mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc. including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distamper over a coat of chalk whitening primer, complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling/roof projection and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description after complete removal of existing treatment and making the surfaces smooth and applying two coats of oil emulsion distemper, complete all as specified and directed.

M&L for preparation of old wall surfaces of any description after complete removal of existing treatment and making the surface smooth and applying two coats of oil emulsion distemper over a coat of chalk white primer, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type in square not exc 0.50 Sqm each pane, fixed with oil putty, complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty or rubber beading in aluminium frame in square n. exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 5.50mm thick sheet glass, ordinary quality and glazing with oil putty or rubber beading in aluminium frame work in square n. exc 0.50 Sqm in each pane, complete all as specified and directed.

M&L for preparation of old surfaces of steel & iron work of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old surfaces of wood & wooden of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 1000 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.

M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Cutting 15/20mm existing GI tubing for alterations or additions (each cut measured) in position without taking down complete all as specified and directed.

S&F "as in repair" 15mm bore stop/angle valve, with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" 15mm bore stop valve, cast copper alloy (ISI Marked), fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F "as in repair" PVC ball valve, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm bore pipe, complete all as specified and directed.

S&F "as in repair" chromium plated tubular towel rail, 20mm dia 'D' type, 60cm long between flanges, complete all as specified and directed.

S&F "as in repair" CP Shower rose of size 150mmx150mm with swivel arm, stainless steel/CP brass, including fixing to steel pipe or union complete all as specified and directed.

S&F "as in repair" Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed.

S&F "as in repair" health foucet (with 1.5mtr long tube) fixed to angular stop cock and complete wall hanging arrangement, complete all as specified and directed.

S&F "as in repair" plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, complete all as specified and directed.

S&F "as in repair" 75mm bore cast iron floor trap with stainless steel CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

S&F "as in repair" Vitreous china wash basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.

S&F "as in repair" Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover for pedestal pan and connecting etc, complete all as specified and directed.

S&F "as in repair" Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.

S&F "as in repair" Viterous china urinals, half stall type, incl CP coupling, waste pipe and all necessary fittings, complete all as specified and directed.

S&F 'as in repair" Vitreous China bowl urinal flat back, size of 330 x 250 x 450 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F "as in repair" PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

S&F "as in repair" syphonic action kit for PVC flushing cistern of 10 Ltrs capacity, complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from water tank and from mouths of circulating pipes without disconnecting of capacity exc 250 Ltrs but not exc 500 Ltrs, complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from water tank and from mouths of circulating pipes without disconnecting of capacity exc 500 Ltrs but not exc 1000 Ltrs, complete all as specified and directed.

Taking down roof trusses, coupled rafters or trussed beams, above 4m but n. exc. 8m length clear span complete all as specified and directed.

M/s Ashoka Brothers

M/S NARESH KUMAR SHARMA

SUBASH MAHAJAN

M/S HIMANSHU BUILDERS

M/S DUGGAL CONSTRUCTION CO

Bidder Name

SUBASH MAHAJAN

M/s Ashoka Brothers

M/S DUGGAL CONSTRUCTION CO

M/S TARA CHAND CONSTRUCTION CO.

M/S NARESH KUMAR SHARMA

M/S HIMANSHU BUILDERS