Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.9 LAccepted-Finance 151 PHASE II INDUSTRIAL AREA CHANDIGARH CHANDIGARH 160101 | CHANDIGARH | CHANDIGARH | 160101 | ₹18.9 L | L1 | Accepted-Finance Agency found L1 |
| 2 | L2₹19.0 L+₹7,388.58 (0.39%)Rejected-Finance 2924 SECTOR 47 CHANDIGARH | ₹19.0 L+₹7,388.58 (0.39%) | L2 | Rejected-Finance Agency not found L1 |
| 3 | L3₹19.1 L+₹12,930.02 (0.68%)Rejected-Finance 581 PHASE I RAM DARBAR CHANDIGARH | ₹19.1 L+₹12,930.02 (0.68%) | L3 | Rejected-Finance Agency not found L1 |
| 4 | L4₹19.1 L+₹16,008.59 (0.85%)Rejected-Finance 1627 SECTOR 26 PANCHKULA | PANCHKULA | HARYANA | 133301 | ₹19.1 L+₹16,008.59 (0.85%) | L4 | Rejected-Finance Agency not found L1 |
| 5 | L5₹19.4 L+₹47,102.21 (2.49%)Rejected-Finance 1627 SECTOR 26 PANCHKULA | ₹19.4 L+₹47,102.21 (2.49%) | L5 | Rejected-Finance Agency not found L1 |
Tender Value
₹30.8 L
EMD Value
₹61,572
Closing Date
2 Sept 2026, 2:00 pmClosed
Executive Engineer, C.P. Division No. 5,
Executive Engineer, C.P. Division No. 5, Deluxe Building, Sector-9D, U.T., Chandigarh
Various works required in the department of transfusion medicine Block D, GMCH, Sector-32, Chandigarh
2026_CHD_95086_1
EECP5/2026/3068729 dated 27.08.2026
Open Tender
Civil Works
Percentage
120 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹61,572
2 Sept 2026
27 Aug 2026
2 Sept 2026
27 Aug 2026
2 Sept 2026
27 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31 | 307.89 | Sqm | 1,233.72 | ₹3,79,850.05 |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 15.56 | 307.89 | Sqm | 53.17 | ₹16,370.51 |
| 3 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) DSR 13.81 | 390.77 | Sqm | 61.01 | ₹23,840.88 |
| 4 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 15.60 | 30 | cum | 256.82 | ₹7,704.6 |
| 5Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge DSR 21.2 | |||||
| 5.01 | Pre-laminated particle board with decorative lamination on both sides DSR 21.2.2 | 84.37 | Sqm | 1,085.28 | ₹91,565.07 |
| 6Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin-charge. DSR 21.4 | |||||
| 6.01 | With stainless steel cover plate minimum 1.25 mm thickness DSR 21.4.1 | 90 | each | 2,747.61 | ₹2,47,284.9 |
| 7 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS :3564,embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete DSR 9.83 | 30 | each | 1,094.48 | ₹32,834.4 |
| 8Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. DSR 9.101 | |||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 8.98 MB
BOQ_116732.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .