SPECIAL REPAIR/ REPLACEMENT TO CI PIPELINE TO DI PIPELINE (PHASE-I) AT AF STN AWANTIPUR

Amount

Taking up U/S CI/ GI/ PPR water main (incl. all fitting) with spigot & socket /MS pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe of 100 mm bore for laying /rerouting of serviceable pipe after cleaning, complete all as specified and directed.

All as per Srl item No.1 above but 150 mm dia bore, complete all as specified and directed.

M&L for laying of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes 100 mm with Spigot & Socket end, Class K-7 conforming to IS: 8329/2000 suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with Sulphur Resistant Cement and external Metallic Zinc Coating with a finishing layer of Black Bitumen coating on external surfaces . The standard lengths of the pipes are 5.5 meter (subject to tolerance as per clause 15.5.1 of IS: 8329:2000) with Ethylene Propylene Diene Monomer (EPDM) rubber gasket conforming to IS:5382 of Bulb-Type-2 as per IS:5382; Heel- Type-5, as per IS:5382 will be supplied. Pursuant to clause 15.5.1 of IS8329, 10% of pipes in each size, may be supplied in shorter lengths on surface/ over masonary pillar and connection to old or new position, complete all as specified and directed. Note:- Work includes tyton joint and consumables like grease, etc.

All as per Srl item 3 above but 150 mm dia bore, complete all as specified and directed.

M&L for laying of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes 150 mm with welded flanged ends, Class K-9 conforming to IS: 8329/2000 with centrifugally applied inside cement mortar lining with Sulphur Resistant Cement and external Metallic Zinc Coating with a finishing layer of Black Bitumen coating on external surfaces . The standard lengths of the pipes are 5.5 meter (subject to tolerance as per clause 15.5.1 of IS: 8329:2000), with rubber gasket nut bolts washers complete as approved, may be supplied in shorter lengths on surface/ over masonary pillar and connection to old or new position, complete all as specified and directed. Note: Work includes rubber gasket as approved for pressurised line and nut bolts with washers. Work may be carried out on any terrain or inclinations.

Burning out lead joint in position in repair, including removing old lead of size 100 mm bore, complete all as specified and as directed.

Burning out lead joint in position in repair, including removing old lead of size 150 mm bore, complete all as specified and as directed.

Burning out lead joint in position in repair, including removing old lead of size 200 mm bore, complete all as specified and as directed.

M&L for run lead joint in repair for size of CI pipe of size 100 mm bore, complete all as specified and as directed.

M&L for run lead joint in repair for size of CI pipe of size 150 mm bore, complete all as specified and as directed.

M&L for run lead joint for size of CI pipe of size 200 mm bore, complete all as specified and as directed.

M&L for ruber gasket joint/ tyton joint for DI pipe in repair of size100 mm bore, complete all as specified and as directed.

M&L for ruber gasket joint/ tyton joint for DI pipe in repair of size 150 mm bore, complete all as specified and as directed.

M&L for ruber gasket joint/ tyton joint for DI pipe in repair of size 200 mm bore, complete all as specified and as directed.

Taking down carefully cast iron sluice valve of size 200 mm bore from CI water mains, dismantling parts and reassembling, replacement of stainless spindle for sluice valve, class PN 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc., complete all as specified and as directed.

Taking down carefully cast iron sluice valve of size 150 mm bore from CI water mains, dismantling parts and reassembling, replacement of stainless spindle for sluice valve, class PN 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc., complete all as specified and as directed.

Taking down carefully cast iron sluice valve of size 100 mm bore from CI water mains, dismantling parts and reassembling, replacement of stainless spindle for sluice valve, class PN 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc., complete all as specified and as directed.

Taking down carefully cast iron sluice valve of size 80 mm bore from CI water mains, dismantling parts and reassembling, replacement of stainless spindle for sluice valve, class PN 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc., complete all as specified and as directed.

M&L for painting of Valve Chamber plastered portion with cement base and steel portion with synthetic enamel paint of any size, complete all as specified and as directed.

Taking out existing U/S CI sluice valve of any size any pattern up to 200 mm bore from 80 mm bore, complete all as specified and as directed.

S&F Cast iron gate sluice valve of size 100 mm dia Stainless steel stem PN- 1.6 (Flanged) conforming to IS 14846 hand wheel operated, complete all as specified and as directed.

All as per Srl Item No. 21 Above but 150 mm dia, complete all as specified and as directed.

Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 15 mm dia, complete all as specified and as directed.

Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 20 mm dia, complete all as specified and as directed.

Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 25 mm dia, complete all as specified and as directed.

Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 40 mm dia, complete all as specified and as directed.

Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 50 mm dia, complete all as specified and as directed.

Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 80 mm dia, complete all as specified and as directed.

Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 100 mm dia, complete all as specified and as directed.

Supply and laying of galvanised steel water tubing medium grade (in replacement) trenches/ wall/ floor with all fittings, including connections such as union elbow, GI sockets, GI Unions, reducer, Tees or any connected accessories as required at site of size 15 mm bore, complete all as specified and as directed.

All as per Srl Item No. 30 above but bore of pipe 20 mm, complete all as specified and as directed.

All as per Srl Item No. 30 above but bore of pipe 25 mm, complete all as specified and as directed.

All as per Srl Item No. 30 above but bore of pipe 40mm, complete all as specified and as directed.

All as per Srl Item No. 30 above but bore of pipe 50mm, complete all as specified and as directed.

All as per Srl Item No. 30 above but bore of pipe 80mm, complete all as specified and as directed.

All as per Srl Item No. 30 above but bore of pipe 100mm, complete all as specified and as directed.

S&F gun metal globe valve (in replacement) with iron handle screwed both ends for iron pipe and fixed of size 15 mm bore, complete all as specified and as directed. Make:- Zoloto, Audcu, L&T

All as per Srl Item No. 37 above but bore of pipe 20mm, complete all as specified and as directed.

All as per Srl Item No. 37 above but bore of pipe 25mm, complete all as specified and as directed.

All as per Srl Item No. 37 above but bore of pipe 40mm, complete all as specified and as directed.

All as per Srl Item No. 37 above but bore of pipe 50mm, complete all as specified and as directed.

Taking out existing U/S NRV of size 80-150 mm bore, complete all as specified and as directed.

Suply and fixing cast iron NRV flanged end of size 200 mm dia with all fitting and accessories, complete all as specified and as directed.

All as per Srl Item No. 43 above but 100 mm dia, complete all as specified and as directed.

All as per Srl Item No. 43 above but 150 mm dia, complete all as specified and as directed.

Brick masonry valve pit of size 120x120x120 cms (internal dimension) with earth work in any type of soil, plain cement concrete M-10 type C-2 as in foundation, brick work in cement mortar 1:6 (01 cement : 06 coarse sand) 23cms thick, 15mm thick plaster in cement mortar 1:4 (01 cement : 04 coarse sand) internally and externally flush pointed in same mortar as the work proceeds flooring shall be 40mm thick in plain cement concrete M-15 (Nominal mix) laid over 75mm thick hard core top cover shall be made out of mild steel sheet 3.15mm thick fixed in angle iron frame made out of angle size 40x40x6mm with two number of hinges on one side and locking aggangement at other side with 50mm pad lock complete including painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. Note: Brick work, PCC, Earthwork, Plaster, Pointing, Steel work is included in this item.

M&L for cement concrete PCC 1:2:4 type B1 in plain cement concrete 20 mm graded coarse aggregate, complete all as specified and as directed.

M&L for road cutting and making good the same by PCC 1:2:4 or bitumen, complete all as specified and as directed.

M&L for excavation in trenches in soft/loose soil not exceeding 1.5 m in depth and width and getting out, complete all as specified and as directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed.

M&L for removal of excess soil from site n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.

M&L for Lagging of exposed pipe by providing all around of pipe 15 mm thick bounded mineral wool performed SNAPON pipe section of density 144 Kg/M3 conforming to IS-9842, covered completely by chicken mesh net 25 guage 20mm mesh and reinforced with 1mm galvanised wire applied spirally @15cm centre to centre and providing 5mm thick smooth evenly. Plaster layers of composition consisting of 85% magnesia asbestos and plaster of paris mortar 1:6 of required strength to suit exposed weather condition under sub zero temperature for 15mm dia pipe, complete all as specified and as directed.

All as per Srl item No. 52 above, but size 20 mm dia, complete all as specified and as directed.

All as per Srl item No. 52 above, but size 25 mm dia, complete all as specified and as directed.

All as per Srl item No. 52 above, but size 40 mm dia, complete all as specified and as directed.

M&L DI bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spigot of the following size upto 150 mm dia, complete all as specified and as directed. (Note:- Work includes lead /gasket for fitting of necessary size)

Note :- An amount of Rs. 7,10,810.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S BASHIR AHMAD AND SONS

M/S ABBAS M. ENTERPRISES

M/S LUCKY BUILDERS

Bidder Name

M/s M Ashraf and Brothers