REPAIR / MAINT AND REPLACEMENT OF INTERNAL ELECTRICAL WIRING WITH FITTINGS, CEILING FAN, EXHAUST FAN GEYSERS AT MARRIED ACCN AT MINNIEBAY UNDER AGE E/M I AT GE MINNIEBAY, PORT BLAIR

Amount

Supply and fixing as in repair of modular switch, one way, 6 Amp 230 V, 1 module complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of modular socket 5/6 Amp, 5 pin 2 module complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of modular switch, one way,6/16 Amp, 230 V, 1 module complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of modular socket 6/16 A, 2/3 pin combined, 2 module complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of modular type fan regulator , step type 120 Watt, 2 module complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of modular switch piano flush type, single pole, two way, 5/6 Amps complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of modular bell push 6A, one module complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of switch piano type flush, single pole, one way, 5/6 Amps, 230 V complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of switch piano type flush, single pole, one way 15A, 230 V complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of socket outlet 2 in 1, 6 pin, 5/15 A, flush piano type, 240 V complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of ceiling rose, surface backlite,three terminal complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of switch piano flush type single pole, two way 5/6 amps complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of bell push flush type one way 5Amp 240 Volt complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of electronic double space rotary 5 speed type regulator 120 watt complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of switch socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 amp, combination complete complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of switch socket combination 3 pin 5 amp complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of socket outlet 3 pin 5 amp, switch socket combination box type complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of 3mm thick laminated super hylem sheet white colour of size 5" x 5" and refitting of existing serviceable switch ,socket, regulator etc complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of 3mm thick laminated super hylem sheet white colour of size 7" x 5" and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge

S&F as in repair 3mm thick laminated super hylem sheet white colour of size 7" x 9" and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge

S&F as in repair 3mm thick laminated super hylem sheet white colour of size 9" x 11" and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge

S&F as in repair 3mm thick laminated super hylem sheet white colour of size 11" x 13" and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge

S&F as in repair Metal sunk box of size 4x4 inch and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:- Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair Metal sunk box of size 4x6 inch and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:- Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair Metal sunk box of size 6x8 inch and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:- Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair Metal sunk box of size 8x10 inch and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:- Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair Metal sunk box of size 10x12 inch and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:- Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair modular metal flush box 1/2 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:-Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair modular metal flush box 3 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:-Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair modular metal flush box 4 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:-Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair modular metal flush box 6 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:-Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair modular metal flush box 8 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:-Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair modular metal flush box 12 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:-Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair modular PVC flush box 1/2 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:-Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate. .

S&F as in repair modular PVC flush box 3 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:-Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair modular PVC flush box 4 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:-Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair modular PVC flush box 6 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:-Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair modular PVC flush box 8 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:-Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair modular PVC flush box 12 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engr-in-Charge Note:-Make good to the disturbed surface i.e with PCC ,Plastering and Painting of existing surface shall be included in the quoted rate.

S&F as in repair modular white cover plate with frame 1 module and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge.

S&F as in repair modular white cover plate with frame 2 module and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge.

S&F as in repair modular white cover plate with frame 3 module and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge.

S&F as in repair modular white cover plate with frame 4 module and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge.

S&F as in repair modular white cover plate with frame 6 module and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge.

S&F as in repair modular white cover plate with frame 8 module and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge.

S&F as in repair modular white cover plate with frame 12 module and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge.

S&F as in repair PVC box of size 4x4 inch and fitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge.

S&F as in repair PVC box of size 4x6 inch and fitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge.

S&F as in repair PVC box of size 8x6 inch and fitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge.

S&F as in repair PVC box of size 8x10 inch and fitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge.

S&F as in repair PVC box of size 10x12 inch and fitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of LED tube rod of capacity 20 watt complete all as specified and as directed by Engr-in-Charge Note : Certificate regarding confirmation of old existing LED fittings is not being covered under guarantee period shall be submitted alongwith RAR duly signed by JE & Engineer-in-Charge

Supply and fixing as in repair of LED tube rod of capacity 10 watt complete all as specified and as directed by Engr-in-Charge Note : Certificate regarding confirmation of old existing LED fittings is not being covered under guarantee period shall be submitted alongwith RAR duly signed by JE & Engineer-in-Charge

Supply and fixing as in repair of single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 25 Amps complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair LED 9 W Bulb complete all as specified and as directed by Engr-in-Charge Note : Certificate regarding confirmation of old existing LED fittings is not being covered under guarantee period shall be submitted alongwith RAR duly signed by JE & Engineer-in-Charge

Supply and fixing as in repair of 18 W LED surface type decorative ultra slim round lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient and making connections with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and as directed by Engr-in-Charge Note : Certificate regarding confirmation of old existing LED fittings is not being covered under guarantee period shall be submitted alongwith RAR duly signed by JE & Engineer-in-Charge

Supply and fixing as in repair of 12 W LED surface / recess type decorative ultra slim round lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient and making connections with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and as directed by Engr-in-Charge Note : Certificate regarding confirmation of old existing LED fittings is not being covered under guarantee period shall be submitted alongwith RAR duly signed by JE & Engineer-in-Charge

Supply and fixing as in repair of Energy efficient ceiling fan 1400mm sweep single phase 230 / 240 volts AC with external distance 1200 speed control with necessary fitting and connecting with cable from ceiling rose or connector to fan including all as specified and directed by Engr-in-Charge. Note : Old Fan shall be deposited to E/ M Store yard.

Supply and fixing as in repair of Energy efficient ceiling fan 1200mm sweep single phase 230 / 240 volts AC with necessary fitting and connecting with cable from ceiling rose or connector to fan complete all as specified and directed by Engr-in-Charge.. Note : Old Fan shall deposited to E/ M Store yard.

Supply and fixing as in repair of LED Strip light 14.4 watt, 220 Volt RGB (WW,WH) Pink coloured complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of neon LED Strip light 12W, 220 Volt RGB coloured complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of neon LED Strip connector for WW/WH and blue, 220Volt complete all as specified and as directed by Engr-in-Charge .

Supply and fixing as in repair of LED Strip connector 220 Volt for RGB coloured complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of call bell (multi music) complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of calla bell (ding dong) complete all as specified and as directed by Engr-in-Charge..

Supply and fixing as in repair of Lamp holder, PVC/ Polycarbonate with back plate for batten fittings of 230 Volts complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of capacitor 2.5 mfd of celling/ wall mounted fan of 230 Volts complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of capacitor 3.15 mfd of celling/ wall mounted fan of 230 Volts complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of PVC casing capping medium grade of size 25mm on wall /roof including necessary fittings such as Tee, Elbow etc and fixing of existing serviceable copper /aluminium conductor complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of PVC casing capping medium grade of size 32mm on wall /roof including necessary fittings such as Tee, Elbow etc and fixing of existing serviceable copper /aluminium conductor complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of PVC conduit medium grade of size 20mm on wall /roof including necessary fittings such as Tee, Elbow etc and fixing of existing serviceable copper /aluminium conductor complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of PVC conduit medium grade of size 25mm on wall /roof including necessary fittings such as Tee, Elbow etc and fixing of existing serviceable copper /aluminium conductor complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of PVC Flexible conduit of size 25 mm on wall /roof with help of screw and GI saddle including fixing of existing serviceable copper conductor complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of PVC Flexible conduit of size 20mm on wall /roof with help of screw and GI saddle including fixing of existing serviceable copper conductor complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of 300mm sweep, 1400 rpm, 240V exhaust fan, continuous duty with louvers, double ball bearing. silent operation, rust proof metal body and blades with fixing arrangements complete all as specified and as directed by Engr-in-Charge Note : Old Fan shall be deposited to E/M Store yard.

Supply and fixing as in repair of wall mounted fan 450 mm sweep complete fixed to wall with nut bolts etc 3 core cable from connected to ceiling rose complete all as specified and as directed by Engr-in-Charge Note : Old Fan deposited to E/ M Store yard.

Supply and fixing as in repair of vertical type of MCCB DB TPN 4 way IP-43 made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and Din rail ,415 Volts with double door complete all as specified and as directed by Engr-in-Charge . Note : DB shall be fixed in wall with front cover shall be flush with wall surface including making good to the disturbed surface

Supply and fixing as in repair of vertical type of MCB DB TPN 4 way IP-43 made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and Din rail ,415 Volts with double door complete all as specified and as directed by Engr-in-Charge . Note : DB shall be fixed in wall with front cover shall be flush with wall surface including making good to the disturbed surface

Supply and fixing as in repair of thermal type of MCCB TP breaking capacity 16 KA, 100 Amps complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of thermal type of MCCB TP N/FP breaking capacity 16 KA , 63 Amps complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of MCB SPN DB 12 way IP-43 made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and Din rail ,230 Volts with double door complete all as specified and as directed by Engr-in-Charge . Note : DB shall be fixed in wall with front cover shall be flush with wall surface including making good to the disturbed surface

Supply and fixing as in repair of MCB SPN DB 8 way IP-43 made of sheet steel phos phatised, powder painted with bus bar, neutral link, earth bar and Din rail ,230 Volts with double door complete all as specified and as directed by Engr-in-Charge Note : DB shall be fixed in wall with front cover shall be flush with wall surface including making good to the disturbed surface

Supply and fixing as in repair of MCB SPN DB 4 way IP-43 made of sheet steel phos phatised, powder painted with bus bar, neutral link, earth bar and Din rail ,230 Volts with double door complete all as specified and as directed by Engr-in-Charge. Note : DB shall be fixed in wall with front cover shall be flush with wall surface including making good to the disturbed surface

Supply and fixing as in repair of MCB TPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 Amps complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of MCB TPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of MCB TP 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 Amps complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of MCB TP 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 Amps complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of MCB SP 240 Volts, 'C' series, breaking capacity 10 KA of rating 6 to 32 Amps complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of MCB SP 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 Amps complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of MCB SP 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of MCB blank plate from MCB DBs complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of E Board 2ft X2Ft complete all as specified and as directed by Engr-in-Charge.

Supply and fixing as in repair of three phase KWH meter 4 wire with LED Display, LED meter 10-60 Amp with Box complete all as specified and as directed by Engr-in-Charge Note : Old KWH Meter shall be deposited to E/ M Store yard.

Supply and fixing as in repair of single phase KWH meter 2 wire with LED Display, LED meter 10-60 Amp with crystal Box complete complete all as specified and as directed by Engr-in-Charge Note : Old KWH Meter shall be deposited to E/ M Store yard.

Taking Down of old energy meter seal and Supply and Fixing PVC energy meter seal with specific number complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of PVC insulated unsheathed multistranded FRLSH copper conductor of size 1.5 Sqmm of any colour complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of PVC insulated unsheathed multistranded copper conductor FRLSH of size 2.5 Sqmm of any colour complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of PVC insulated unsheathed multistranded copper conductor FRLSH of size 4.0 Sqmm of any colour complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repairs of PVC insulated unsheathed multistranded copper conductor FRLSH of size 6.0 Sqmm of any colour complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repairs of PVC insulated unsheathed multistranded copper conductor FRLSH of size 10.0 Sqmm of any colour complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of PVC AC box with 25 Amps MCB complete all as specified and directed by Engr -in -charge.

Supply and fixing as in repair of 36 watt LED driver in replacement of 2 X 2 ultra slip recess mounted luminaire with high brightness complete all as specified and as directed by Engr-in-Charge

Taking down carefully aluminium/copper point wiring (light, fan socket or power) complete including fittings & fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of walls, floors etc complete all as required and keeping serviceable light fittings in safe custody for reuse complete all as specified and as directed by Engr-in-Charge .

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated 1100 volts grade, multi stranded, copper conductor, single core cables (FRLSH quality) unsheathed cable drawn through and including PVC casing capping of adequate size but not less than 20mm in width, 1.2mm thick with all fittings and accessories including sunk mild steel terminal boxes with 3mm thick plastic laminated sheet top cover or PVC termination board/boxes for mounting switches, sockets, regulators etc. including PVC insulated and unsheathed, multi-stranded single core copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one light/fan point controlled by one 5 Amps one way switch complete as specified and directed.

All as per item No 107.00 above but one fan point controlled by one 5 Amps one way switch complete all as specified and as directed by Engr-in-Charge

All as per item No 107.00 above but one 3 pin socket outlet 5 Amps, on independent board complete all as specified and as directed by Engr-in-Charge .

All as per item No 107.00 above for call bell point controlled by bell push complete all as specified and as directed by Engr-in-Charge .

All as per item No 107.00 above but one 3 pin socket outlet 5 Amps, on the same board complete all as specified and as directed by Engr-in-Charge

All as per item No 107.00 above but one light point controlled by two 2 way switches complete all as specified and as directed by Engr-in-Charge

All as per item No 107.00 above but point wiring for one 3 pin 15 Amps socket point on independent board with 2.5 Sqmm size PVC insulated, unsheathed, multi stranded, copper conductor cables FRLSH and with 2.5 Sqmm PVC insulated unsheathed, single core, multistranded copper conductor cable as earth wire complete as specified and directed.

M & L for point wiring ,wire drawn through in and including PVC concealed conduit and with 1.5 sqmm PVC FRLSH insulated(red for phase and black for neutral) sheathed , multi stranded copper conductor 1100 volt grade cable and 1.5 sqmm green in colour PVC insulated multistranded copper conductor cable for earth continuity connected to common earth bus incl factory made metal sheet terminal box flush type of thickness not less than 3.00mm, for mounting fittings such as switches, sockets, fan regulators, bell push etc and including all other fixing accessories complete for one light point/fan point controlled by one way switch complete all as specified and as directed by Engr-in-Charge .

All as per item No 114.00 above but one fan point controlled by one 5 Amps one way switch complete all as specified and as directed by Engr-in-Charge

All as per item No 114.00 above but one call bell point controlled by bell push complete all as specified and as directed by Engr-in-Charge .

All as per item No 114.00 above but one 5 Amp socket controlled by one switch Independent board complete all as specified and as directed by Engr-in-Charge .

All as per item No 114.00 above but one 5 Amp socket controlled by one switch on same board complete all as specified and as directed by Engr-in-Charge .

All as per item No 114.00 above but one light point controlled by two 2-way switches complete all as specified and as directed by Engr-in-Charge

All as per item No 114.00 above but one 3 pin/5/15 Amps switch socket out let independent but using PVC FRLSH insulated, unsheathed stranded copper conductor cable of size 4 Sqmm and 4.0 sqmm for earth continuity conductor for one 3 pin 5/15 Amps switch socket out let independent (Power circuit to be taken from MCB DB) complete all as specified and as directed by Engr-in-Charge

M & L for point wiring ,wire drawn through in and including PVC concealed conduit and with 1.5 sqmm PVC FRLSH insulated(red for phase and black for neutral) sheathed , multi stranded copper conductor 1100 volt grade cable and 1.5 sqmm green in colour PVC insulated multistranded copper conductor cable for earth continuity connected to common earth bus incl factory made metal sheet terminal box modular flush type of thickness not less than 3.00mm (required as per site condition), for mounting fittings such as switches, sockets, fan regulators, bell push etc and including all other fixing accessories complete all as specified and directed for one light point/fan point controlled by one way modular switch complete all as specified and as directed by Engr-in-Charge . Note:- Modular Box PVC/ Metal and cover plates shall be included in the quoted rate

All as per item No 121.00 above but one fan point controlled by one 5 Amps one way modular switch complete all as specified and as directed by Engr-in-Charge

All as per item No 121.00 above but one call bell point controlled by push bottom complete all as specified and as directed by Engr-in-Charge .

All as per item No 121.00 above but one 5 /6 Amp socket controlled by one switch Independent board complete all as specified and as directed by Engr-in-Charge .

All as per item No 121.00 above but one 5/6 Amp socket controlled by one switch on same board complete all as specified and as directed by Engr-in-Charge .

All as per item No 121.00 above but one light point controlled by two 2 way switches complete all as specified and as directed by Engr-in-Charge

All as per item No 121.00 above but one 3 pin/5/15 Amps switch socket out let independent but using PVC FRLSH insulated, unsheathed stranded copper conductor cable of size 4 Sqmm and 4.0 Sqmm for earth continuity conductor for one 3 pin 5/15 Amps switch socket out let independent complete all as specified and as directed by Engr-in-Charge

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated 1100 volts grade, multi stranded, copper conductor, single core cables (FRLSH quality) unsheathed cable drawn through and including PVC casing capping of adequate size but not less than 20mm in width, factory made PVC sheet terminal box modular flush type of thickness as per manufacturer ( required as per site condition), for mounting fittings such as switches, sockets, fan regulators, bell push etc and including all other fixing accessories complete all as specified and directed for one light point/fan point controlled by one way modular switch complete all as specified and as directed by Engr-in-Charge complete all as specified and as directed by Engr-in-Charge . Note:- Modular Box PVC/ Metal and cover plates shall be included in the quoted rate

All as per item No 128.00 above but one fan point controlled by one 5 Amps one way modular switch complete as specified and directed.

All as per item No 128.00 above but one call bell point controlled by bell push complete all as specified and as directed by Engr-in-Charge .

All as per item No 128.00 above but one 5 /6 Amp socket controlled by one switch Independent board complete all as specified and as directed by Engr-in-Charge

All as per item No 128.00 above but one 5/6 Amp socket controlled by one switch on same board complete all as specified and as directed by Engr-in-Charge

All as per item No 128.00 above but one light point controlled by two 2-way switches complete all as specified and as directed by Engr-in-Charge

All as per item No 128.00 above but one 3 pin/5/15 Amps switch socket out let independent but using PVC FRLSH insulated, unsheathed stranded copper conductor cable of size 4 Sqmm and 4.0 Sqmm for earth continuity conductor for one 3 pin 5/15 Amps switch socket out let independent complete all as specified and as directed by Engr-in-Charge

S&F ceiling rose, surface, Bakelite, 65x50mm two to three terminals complete all as specified and as directed by Engr-in-Charge

S&F lamp holder, PVC/ Polycarbonate type with back plate for batten fittings complete all as specified and as directed by Engr-in-Charge .

Supply and fixing as in repair of LED bulb 0.5 Watt R-Y-B colour complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair of LED 7 W Bulb type complete all as specified and as directed by Engr-in-Charge . Note : Certificate regarding confirmation of old existing LED fittings is not being covered under guarantee period shall be submitted alongwith RAR duly signed by JE & Engineer-in-Charge

S&F in repairs energy efficient recess / ceiling mounted LED luminary suitable for 2'x2' grid with profiled diffuser including lamp, electronic control driver 40 watts, AC 230 Volts 50 Hz supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose complete all as specified and as directed by Engr-in-Charge

S&F in repairs energy efficient wall mounted LED luminary 12 watts, AC 230 Volts 50 Hz supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose complete all as specified and as directed by Engr-in-Charge Note : Certificate regarding confirmation of old existing LED fittings is not being covered under guarantee period shall be submitted alongwith RAR duly signed by JE & Engineer-in-Charge

S&F in repairs LED mirror light fittings 10 Watt integral polycarbonate LED channel with white acrylic cover complete all as specified and as directed by Engr-in-Charge. Note : Certificate regarding confirmation of old existing LED fittings is not being covered under guarantee period shall be submitted alongwith RAR duly signed by JE & Engineer-in-Charge

S&F in repairs LED building security light fittings 36W pressure dia cast housing with epoxy power coated dark graphite grey colours finish, polycarbonate cover with individual LED lenses with IP 65 protection complete all as specified and as directed by Engr-in-Charge Note : Certificate regarding confirmation of old existing LED fittings is not being covered under guarantee period shall be submitted alongwith RAR duly signed by JE & Engineer-in-Charge

Supply and fixing as in repair of GI bracket made out of GI pipe of size 25mm dia and 60cm long including two no of GI clamp fixed on wall with GI flash nut of suitable size complete all as specified and as directed by Engr-in-Charge

Taking down old unserviceable aluminium sub main wiring any size complete with PVC conduit/ casing capping and removing materials from site and making good disturbed surfaces of walls, etc complete as specified and directed.

M&L for sub main wiring with 4 runs of 6 Sqmm single core, PVC insulated, unsheathed 1100 Volts grade, multi-stranded, copper conductor cables (FRLSH quality) drawn through PVC casing capping / conduit with fitting/accessories, fixed on, walls, ceiling etc. as required including 6 Sqmm PVC insulated, unsheathed, multistranded, copper conductor, single core cable as earth continuity wire complete all as specified and as directed by Engr-in-Charge Note : (i) Rates quoted shall be inclusive of PVC casing capping/ Conduit and its accessories (ii) Five runs of cables and one run of conduit shall be measured as one unit

M&L for sub main wiring with 4 runs of 10 Sqmm single core, PVC insulated, unsheathed 1100 Volts grade, multi-stranded, copper conductor cables (FRLSH quality) drawn through PVC casing capping / Conduit with fitting/accessories, fixed on, walls, ceiling etc. as required including 10 Sqmm PVC insulated, unsheathed, multistranded, copper conductor, single core cable as earth continuity wire complete as specified and directed. Note : (i) Rates quoted shall be inclusive of PVC casing capping/ Conduit and its accessories (ii) Five runs of cables and one run of conduit shall be measured as one unit

M&L for sub main wiring with 2 runs of 6 Sqmm single core, PVC insulated, unsheathed 1100 Volts grade, multi-stranded, copper conductor cables (FRLSH quality) drawn through PVC casing capping / Conduit with fitting/accessories, fixed on, walls, ceiling etc. as required including 6 Sqmm PVC insulated, unsheathed, multistranded, copper conductor, single core cable as earth continuity wire complete as specified and directed. Note : (i) Rates quoted shall be inclusive of PVC casing capping/ Conduit and its accessories (ii) Three runs of cables and one run of conduit shall be measured as one unit

M&L for sub main wiring with 2 runs of single core, 4 Sqmm PVC insulated, unsheathed, 1100 volts grade multi-stranded, copper conductor cables (FRLSH quality) drawn through PVC casing capping / Conduit with fitting/accessories, fixed on roof, walls, ceiling etc including 4 Sqmm PVC insulated, unsheathed, single core, multistranded,, copper conductor as earth continuity wire complete as specified and directed. Note : (i) Rates quoted shall be inclusive of PVC casing capping/ Conduit and its accessories (ii) Three runs of cables and one run of conduit shall be measured as one unit

M&L for cutting of grove channel of wall for sub main wiring and preparing surface to make good complete all as specified and directed.

S&F in repairs fan hook suitable for hanging of ceiling fan of any size made out of MS flat 40x5 mm clamp or 12 mm dia Square bar long max 30 CM , duly welded/drilled, including nuts, bolts and washers complete all as specified and as directed by Engr-in-Charge

S&F in repairs earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 25 mm x 3 mm by means of GI Welding made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to control board or transformer neutral earth or as directed including earthing pit in PCC (1:3:6) type C-1, pre-cast reinforced cover with steel round bar 8 mm RCC 1:1.5:3 cover slab of size 450x 450 x 100 mm with one handle made out of 8 mm dia round bar 20 mm dia GI pipe light grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and testing complete all as specified and as directed by Engineer-in -charge.

Taking down ceiling fan of any type, any make and any sweep for repairing, opening the body including blade, checking for replacement of unserviceable spares, cleaning, oiling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position testing and hanging up the same complete all as specified and as directed by Engr-in-Charge Note: New spare parts required for renewal shall be measured and paid separately as 'Supply only'.

Supply only the following spare parts for ceiling fans :-

MS split pin size 2 " x 1/8 "

Hanging bolt with nut of size 3/8" x 3 1/2 " .

Rubber bush of size 1 1/2 " dia x 1" thick

Blade of size - 1200 mm sweep (Set of three).

Ball bearing of existing size.

Metal bush bearing

Shaft (good quality of mild steel) for 1200 / 1400 mm sweep ceiling fan.

M&L for re-winding of ceiling fan, 1200 mm sweep with super enamelled copper wire and insulation of starter with polyester paper/manllex paper with cotontak binding, heat varnished complete all as specified and as directed by Engr-in-Charge

Taking down exhaust fan of any type, any make and any sweep for repairing, opening the body including blade, checking for replacement of unserviceable spares, cleaning, oiling, greasing, replacement of unserviceable spare by new one, ,re-assembling of all components in original position testing and hanging up the same as directed Note: New spare parts required for renewal shall be measured and paid separately as 'Supply only'.

Supply only the following spare parts for exhaust fans :-

Ball bearing of existing size.

Blade for 300/250 mm sweep (Set of three).

Metal bush bearing

Blade for 450 mm sweep (Set of three)

Shaft for exhaust fan ( good quality of mild steel) for 300/450 mm sweep.

M&L for rewinding of exhaust fan, 300 mm sweep with super enamelled copper wire and insulation of starter with polyester paper/manllex paper with cotontak binding, heat varnished complete all as specified and as directed by Engr-in-Charge

M&L for rewinding of exhaust fan 450 mm sweep with super enamelled copper wire and insulation of starter with polyester paper/manllex paper with cotontak binding, heat varnished complete all as specified and as directed by Engr-in-Charge

M&L for rewinding of exhaust fan 250 mm sweep with super enamelled copper wire and insulation of starter with polyester paper/manllex paper with cotontak binding, heat varnished complete all as specified and as directed by Engr-in-Charge

Taking down cabin fan/ wall mounted of size 400/450 mm of any type, any make , by opening of body carefully checking for replacement of unserviceable spares, including replacement of spares by new one, re-assembling of all components in original position, cleaning, oiling, greasing, testing and fixed in original position. Note: New spare parts required for renewal shall be measured and paid separately as 'Supply only'.

Supply only the following spares for cabin fan/wall mounted :-

Ball bearing of suitable size

Shaft ( good quality of mild steel).

Metal bush bearing .

Blade for 400 mm sweep (Set of three).

M&L for rewinding of wall mounted fan 400 mm sweep with super enamelled copper wire and insulation of starter with polyester paper/manllex paper with cotontak binding, heat varnished complete all as specified and as directed by Engr-in-Charge

Supply and fix as in repair for copper flexible wire twin core of size 1.5 complete all as specified and as directed by Engr-in-Charge

Supply and fix as in repair for canopy for 1200 mm sweep ceiling fan complete all as specified and as directed by Engr-in-Charge.

S&F in repairs capacitor 4.0 mfd capacity complete all as specified and as directed by Engr-in-Charge

Material and labour for spray painting of ceiling fan of size 1200/1400mm sweep with synthetic enamel white paint including preparation of old painted surface including writing of 'MES No' complete all as specified and as directed by Engr-in-Charge

Material and labour for spray painting of Exhaust fan of size 300/450/600mm sweep with synthetic enamel of existing colour including preparation of old painted surface including writing of 'MES No' as directed by Engineer-in-Charge.

S&F in repairs energy efficient 5 Star 15 litters capacity electrical geyser white/half white, copper container inner tank with fibber reinforced body (FRB) puff insulation for both inner tank & for hot outlet copper connection pipe with all in built in safety accessories like thermostat/automatic thermal cut out with ON /OFF /CUT out indicators all pre-wired and additional safety accessories like pressure release valve/pressure reducing valve, non return valve, rate shall be including for new PVC heavy duty pipe with brass ferrule fitting for HOT and COLD water connections fixed in same or new location as ordered/required as per manufacturers instruction with suitable size nuts & bolts, making necessary connection & testing on completion complete all as specified and as directed by Engr-in-Charge

Supply and fixing as repair for MS black tube, medium grade, 20mm bore, for hanging only ceiling fan including necessary cutting, drilling, threading complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in repair fastener bolts with nut and washer of size 3 inch long with accessories complete all as specified and as directed by Engr-in-Charge.

Taking down of unserviceable geyser of 25/50 litre capacity of any make from the wall after disconnecting and opening of nuts and bolts carefully for repair and testing in MES store yard for ascertaining repair, refixing the same after repair/replacement of nuts and bolts, connecting to water mains and electric supply, after carrying out the repair work/ replacement complete all as specified and as directed by Engineer-in-charge.

Dismantling to geyser of capacity 50 litre of any make, taking out inner tank, descaling the inner surface by scrapping carrying out soldering/ brazing/gas welding to prevent the leakage, filling of glass wool & assembling the same after repair including replacement of required number of stainless steel screws, nuts & bolts for fixing of siphon assembly etc complete all as specified and directed by Engineer-in-charge. Note – Glass wool shall be measured & paid separately under relevant item as 'Supply only".

Dismantling to geyser of capacity 25 litre of any make, taking out inner tank, descaling the inner surface by scrapping carrying out soldering/ brazing/gas welding to prevent the leakage, filling of glass wool & assembling the same after repair including replacement of required number of stainless steel screws, nuts & bolts for fixing of siphon assembly etc complete all as specified and directed by Engineer-in-charge. Note – Glass wool shall be measured & paid separately under relevant item as 'Supply only".

Supply only glass wool of good quality suitable for 50 litre capacity of geyser complete all as specified and as directed by Engineer-in-Charge.

Supply only glass wool of good quality suitable for 25 litre capacity of geyser complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs of inner tank with connected fitting fixture of 50 liter capacity geysers of existing make & model including testing after assembled & fixed at site complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs of inner tank with connected fitting fixture of 25 liter capacity geysers of existing make & model including testing after assembled & fixed at site complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs of heating element 1.5 KW for geysers complete all as specified and as directed by Engr-in-Charge

S&F in repairs of heating element 2.0 KW for geysers complete all as specified and as directed by Engr-in-Charge

S&F in repairs of thermostat switch suitable for geysers complete all as specified and as directed by Engr-in-Charge

S&F in repairs LED Indicating Lamp of geyser complete all as specified and as directed by Engr-in-Charge

S&F in repairs of 23 to 30 cm long ,10mm bore, Chromium Plated connection with brass union suitable for geysers complete all as specified and as directed by Engr-in-Charge

S&F in repairs gun metal non return valve ,15 mm bore complete all as specified and as directed by Engr-in-Charge

S&F 45cm long , 15mm bore PVC connection pipe (Set of two) with brass union both ends fixed to GI pipe at the same place of geyser complete all as specified and as directed.

Taking down of unserviceable Apparatus plate for 50 litre from geyser and supply and fixing of new Apparatus plate for 50 litre at the same place of geyser complete all as specified and as directed.

S&F in repairs Apparatus plate for 25 litre geyser complete all as specified and as directed by Engr-in-Charge

S&F in repairs Plug top 3pin, 16 Amp for geyser complete all as specified and as directed by Engr-in-Charge

M&L for preparation of surface of geyser of 25 ltrs capacity of any make by scrapping to existing paint, filling cavities with filler (Putty) after cleaning of dust etc and applying two coats of synthetic enamel paint over a coat of red oxide primer and writing the MES No with radium sticker complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of surface of geyser of 50 ltrs capacity of any make by scrapping to existing paint, filling cavities with filler (Putty) after cleaning of dust etc and applying two coats of synthetic enamel paint over a coat of red oxide primer and writing the MES No with the radium sticker complete all as specified and as directed by Engineer-in-Charge.

Repair of Geyser body by cutting the rusted portion and remaking of body by providing new mild steel sheet and cutting in shape including welding and re-painting with two coats of deco paint over a coat of red oxide primer all as specified and directed.

S&F in replacement of top cover for geyser for capacity 50 as required on site duly painted with spray paint all as directed.

S&F in replacement top cover for geyser for capacity 25 litres as required on site duly painted with spray paint all as directed.

S&F in replacement bottom cover for geyser for capacity 50 litres as required on site duly painted with spray paint all as directed.

S&F in replacement bottom cover for geyser for capacity 25 litres as required on site duly painted with spray paint all as directed.

S&F in replacement of 2.5 sqmm copper cable three core rubber insulated complete all as specified and as directed by Engr-in-Charge

S&F in repairs air pressure release safety valve 15mm suitable for geyser of 25/50 Ltrs capacity complete all as specified and as directed by Engr-in-Charge

SHUSHANT ASSOCIATES

A. R. ELECTRICALS

M/s Karbhagam Sales Agency

M/s Pooja Enterprises