REPAIR AND ROUTINE MAINTENANCE OF LIFTS AT ARCHANA, ANURADHA, CHITRA, KANYA, WNC (O) MESS, ANNEX NO 03, 42 SOQ (TRANSIT AT WNC), J(E), K(E), JYESTHA AND DANISHTA AT NOFRA UNDER GE (NW) NOFRA, COLABA, MUMBAI

Amount

Repair and routine maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lifts 13 Passenger capacity G+15 floors having dual power operated door, automatic levelling device and microprocessor based simplex collective control system with repair of minor parts such as bearing,bushes all types of shoes, headers, hangers, door cards, door locks, control cards, connector links, hall push buttons and its spares covers, rewinding of motors, maintenance of Fan, Automatic rescue device, Hooter/Alarm, welding of cracked/ broken parts repair of door safety edge working at any principal and any type sensor or mechanical safety lock magnetic lock or contact COP buttons, car position indicator, door sill, car door sill, shaft wiring cables, cabin light, repair/ fixing of broken granite matching with existing surface with cement by mortar CM 1:4 complete including red/green carpet in each cabin complete etc. and necessary wiring and cables as per requirement for safe operation of lift complete to ensure safe and smooth operation of lift complete all as specified and directed by Engineer in charge Location :Arcahna-I, Arcahna-II (Total 02 Lifts)

Repair and routine maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lifts 1000 Kgs Goods Lift capacity G+14 Floors having dual power operated door, automatic levelling device and microprocessor based simplex collective control system with repair of unserviceable parts such as bearing,bushes all types of shoes, hangers, door cards, door locks, control cards, door ropes, connector links, hall push buttons and its spares covers, rewinding of motors, Repair of Fan, Automatic rescue device, Hooter/Alarm, welding of cracked/ broken parts repair of door safety edge working at any principal and any type sensor or mechanical safety lock magnetic lock or contact COP buttons, car position indicator, door sill, car door sill, cabin light, cabin fan, repair/ fixing of broken granite cladding with edge chamfered/ rounded match with existing with cement by mortar CM 1:4 complete including red/green carpet in each cabin complete etc. and necessary wiring and cables as per requirement for safe operation of lift complete to ensure safe and smooth operation of lift complete all as specified and directed by Engineer in charge Location : Anuradha and Chitra Building (Total 02 Lifts)

Repair and routine maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lifts 1000 Kgs Goods Lift capacity G+13 Floors having dual power operated door, automatic levelling device and microprocessor based simplex collective control system with repair and replacements of unserviceable parts such as bearing,bushes all types of shoes, headers, hangers, door cards, door locks, control cards, door ropes, connector links, hall push buttons and its spares covers, rewinding of motors, Repair/maintenance of Fan, Automatic rescue device, Hooter/Alarm, welding of cracked/ broken parts repair/ replacement of door safety edge working at any principal and any type sensor or mechanical safety lock magnetic lock or contact COP buttons, car position indicator, door sill, car door sill, shaft wiring cables, cabin light, cabin fan, repair/ fixing of broken granite cladding with edge chamfered/ rounded match with existing with cement by mortar CM 1:4 complete including red/green carpet in each cabin complete etc. and necessary wiring and cables as per requirement for safe operation of lift complete to ensure safe and smooth operation of lift complete all as specified and directed by Engineer in charge Location : Kanya Building (Total 01 Lift)

Repair and routine maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lifts 08 Passenger Lift capacity G+6 Floors having having dual power operated door, automatic levelling device and microprocessor based simplex collective control system with repair of unserviceable parts such as bearing,bushes all types of shoes, headers, hangers, door cards, door locks, control cards, door ropes, connector links, hall push buttons and its spares covers, rewinding of motors, Repair of Fan, Automatic rescue device, Hooter/Alarm, welding of cracked/ broken parts repair/ replacement of door safety edge working at any principal and any type sensor or mechanical safety lock magnetic lock or contact COP buttons, car position indicator, door sill, car door sill, shaft wiring cables, cabin light, repair/ fixing of broken granite cladding with edge chamfered/ rounded match with existing with surface by mortar CM 1:4 complete including red/green carpet in each cabin complete etc. and necessary wiring and cables as per requirement for safe operation of lift complete to ensure safe and smooth operation of lift complete all as specified and directed by Engineer in charge Location: WNC (O) Mess, Annex No.3 at NOFRA (Total 02 Lifts)

Repair and routine maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lifts 13 Passenger Lift (884 Kgs) capacity G+6 Floors having dual power operated door, automatic levelling device and microprocessor based simplex collective control system with repair and replacements of unserviceable parts such as bearing,bushes all types of shoes, headers, hangers, door cards, door locks, control cards, door ropes, connector links, hall push buttons and its spares covers, rewinding of motors, Repair of Fan, Automatic rescue device, Hooter/Alarm, welding of cracked/ broken parts repair of door safety edge working at any principal and any type sensor or mechanical safety lock magnetic lock or contact COP buttons, car position indicator, door sill, car door sill, shaft wiring cables, cabin light, repair/ fixing of broken granite cladding with edge chamfered/ rounded match with existing with cement by mortar CM 1:4 complete including red/green carpet in each cabin complete etc. and necessary wiring and cables as per requirement for safe operation of lift complete to ensure safe and smooth operation of lift complete all as specified and directed by Engineer in charge Location: 42 SOQ Transist WNC (O) Mess at NOFRA (Total 01 Lift)

Repair and routine maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lifts 1000 Kgs Goods Lift capacity G+6 Floors having dual power operated door, automatic levelling device and microprocessor based simplex collective control system with repair of unserviceable parts such as bearing,bushes all types of shoes, headers, hangers, door cards, door locks, control cards, door ropes, connector links, hall push buttons and its spares covers, rewinding of motors, Repair of Fan, Automatic rescue device, Hooter/Alarm, welding of cracked/ broken parts repair/ replacement of door safety edge working at any principal and any type sensor or mechanical safety lock magnetic lock or contact COP buttons, car position indicator, door sill, car door sill, shaft wiring cables, cabin light, repair of broken granite cladding with edge chamfered/ rounded match with existing surface by mortar CM 1:4 complete including red/green carpet in each cabin complete etc. and necessary wiring and cables as per requirement for safe operation of lift complete to ensure safe and smooth operation of lift complete all as specified and directed by Engineer in charge Location: 42 SOQ Transist WNC (O) Mess at NOFRA (Total 01 Lift)

Repair and routine maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lifts 06 Passenger Lift capacity G+5 Floors having dual power operated door, automatic levelling device and microprocessor based simplex collective control system with repair of unserviceable parts such as bearing,bushes all types of shoes, headers, hangers, door cards, door locks, control cards, door ropes, connector links, hall push buttons and its spares covers, rewinding of motors, Repair of Fan, Automatic rescue device, Hooter/Alarm, welding of cracked/ broken parts repair/ replacement of door safety edge working at any principal and any type sensor or mechanical safety lock magnetic lock or contact COP buttons, car position indicator, door sill, car door sill, shaft wiring cables, cabin light, repair/ fixing of broken granite cladding with edge chamfered/ rounded match with existing surface by mortar CM 1:4 complete including red/green carpet in each cabin complete etc. and necessary wiring and cables as per requirement for safe operation of lift complete to ensure safe and smooth operation of lift complete all as specified and directed by Engineer in charge. Location: J (E) and K (E) Bldg at NOFRA (Total 02 Lifts)

Repair and routine maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lifts 13 Passenger Lift capacity G+16 Floors having dual power operated door, automatic levelling device and microprocessor based simplex collective control system with repair of unserviceable parts such as bearing,bushes all types of shoes, headers, hangers, door cards, door locks, control cards, door ropes, connector links, hall push buttons and its spares covers, rewinding of motors, Repair of Fan, Automatic rescue device, Hooter/Alarm, welding of cracked/ broken parts repair/ replacement of door safety edge working at any principal and any type sensor or mechanical safety lock magnetic lock or contact COP buttons, car position indicator, door sill, car door sill, shaft wiring cables, cabin light, repair/ fixing of broken granite cladding with edge chamfered/ rounded match with existingsurface by mortar CM 1:4 complete including red/green carpet in each cabin complete etc. and necessary wiring and cables as per requirement for safe operation of lift complete to ensure safe and smooth operation of lift complete all as specified and directed by Engineer in charge. Location: Jyestha and Danistha Building at NOFRA (Total 02 Lifts)

Repair and routine maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lifts 08 Passenger Lift capacity G+16 Floorshaving dual power operated door, automatic levelling device and microprocessor based simplex collective control system with repair of unserviceable parts such as bearing,bushes all types of shoes, headers, hangers, door cards, door locks, control cards, door ropes, connector links, hall push buttons and its spares covers, rewinding of motors, Repair of Fan, Automatic rescue device, Hooter/Alarm, welding of cracked/ broken parts repair/ replacement of door safety edge working at any principal and any type sensor or mechanical safety lock magnetic lock or contact COP buttons, car position indicator, door sill, car door sill, shaft wiring cables, cabin light, repair/ fixing of broken granite cladding with edge chamfered/ rounded match with existing surface by mortar CM 1:4 complete including red/green carpet in each cabin complete etc. and necessary wiring and cables as per requirement for safe operation of lift complete to ensure safe and smooth operation of lift complete all as specified and directed by Engineer in charge Location: Jyestha and Danistha Building at NOFRA (Total 02 Lifts)

Notes for item No 1.00 to 9.00: (1) The AMC should cover any/all parts of lifts if its function found defective the same should be repaired or replaced by the OEM as per the timeline covered under norms. 2)One Mechaninc shall be avialable round the clock at lift complaint cell for safe and smooth function of the lift. 3)Rewinding of motor/gear if required will be done by contractor and no extra cost will be given by department. 4) Cost of minor spare parts routine material required for above mentioned maintenance is deemed to be included in the quoted rate exept items mentiioned here in after. No additional cost of spares is admissible for the above maintenance. 5) All minor spare parts and parts required for repair replacement for maintenance of lifts to be replaced during the AMC at no extra payment. 6) Bidders are to submit yearly Inspection report from Govt of Maharashtra issued by Chief Electrical Inspector 7) Two coats of painting of Gear and motor and all MS channels and Control panels using spray gun complete, dewatering of lift wells in case of any emergency arise all as directed by Engr in Charge.

Dismantling and taking out unserviceable old control panel with control wiring up to mid way junction and Supply and fixing new control panel with multiple integrated micro processor programmable chip based suitable for auto door, consisting of contactors, intergrated mother board & compatible to existing capacity VVVF drive, connectors, assembled in MS Sheet cabinet with lockable hinge door, foot mounted, in powder coated finish, seperate box for breaking resistor and programmed in such a way to operate lift from COP and and comprising with variable voltage, variable frequency drive suitable up to 15 HP motor 240 volts 50Hz controlled by pulse with modulation complete with all safety devices such as over current protection, single phase protection etc. including proper connection with proper lugs, terminal connectors screws and motor connection with galvanised sheet trunking 24 SWG including wiring of main motor with 6.0 sq mm copper conductor in PVC insulated, IS Marked etc. including all standard features & fixtures etc all as per IS 14665 for G+5 floors 06 Passenger Lifts complete all as specified and directed by Engineer in charge.

Taking down old unserviceable COP after disconnecting old COP supply & fixing new car operating panel complete including dismantling all as specified and directed by Engineer-in-Charge.

Taking down unserviceable landing push button box complete with stainless steel plate push buttons and combined digital position indicator and arrow indicator supply and fixing e-landing push button box complete with stainless steel plate push buttons and combined digital position indicator and arrow indicator complete all as specified & directed by Engr-in-Charge.

Dismantling and taking out of existing shaft wiring and supply and fixing new shaft wiring of the lift shaft with copper wire from lift room control panel to motor break devices and landing floor switch locks outside push button with indicators from half way junction for all landing and also to lift inside push button complete all as specified and directed by Engineer-in-Charge.

Taking down old shaft information system and Supply and Fixing in replacement of Shaft formation system in 1000 Kgs goods lift / 13 Passenger Lift/8 passengers complete all as specified and directed by the Engr-in-charge

Taking out unserviceable travelling cable from hoist way and supply and fixing new travelling cable PVC insulated 16 core flat type with stranded copper conductor 1100 volts grade of size 0.75 Sqmm confirming to relevant IS in and including thickness suspended type freely moving with car cabin up and down movement between ground and upper floor including necessary connection with mid way junction and other connections required in circuits complete all as specified and directed by the Engr-in-charge

Dismantling and taking out ARD control system and supplying, installing, testing and commissioning of new UPS Based ARD system consisting of contactors, IGBT card, battery charger control card, power transformer Battery 12 VDC 18 AH etc assembled in a MS Sheet in Powder coated finish with hinge door and foot mounted cabinet suitable for upto 10 HP AC Induction motor and compatible as per existing controller at site including all standard features etc complete all as specified and directed by the Engr-in-charge.

Taking out unserviceable Floor announcement system with music Hindi and English and Supply and Fixing in replacement of Floor Announcement system in 1000 Kgs good lift/ 13 Passenger Lift /8Passengers complete all as specified and as directecd by engr-in-charge. Make : As per existing make at site Location as approved by GE

Taking out unserviceable batteries and Supply and Fixing in replacement of new sealed maintenance free batteries 12 Volts, 17 AH complete all as specified and directed by the Engr-in-charge Location: Jyestha Building , Danistha Building, 42 SOQ transit, Annex NO.3, Archana Building, Chitra Building, in Nofra Colaba Mumbai

Taking out unserviceable machine encoder and Supply and Fixing in replacement of encoder of geared machine Main Sheave in certain bldgs (1000 Kgs Goods Lift or 13 Passenger lift) complete all as specified and directed by the Engr-in-charge

Taking down old unserviceable Rope overload sensor after disconnecting old rope over load sensor supply and fixing New Rope Load Sensor at Certain bldgs lifts (G+14/G+15) at Nofra complete all as directed by Engineer-in-Charge

Taking out unserviceable False ceiling and Supply and Fixing of False Ceiling Grade SS 304 for 6 Passenger Lift in certain Building at Nofra complete all as specified and directed by the Engr-in-charge

Taking down old unserviceable Aluminium chequered plate and supply & fixing new aluminium Chequered plate of thickness upto 5mm including removing existing plates complete all as specified and directed by Engineer-in- Charge.Make- Jindal or equivalent make as mentioned in PS Appx 'B'

Taking out unserviceable Landing door header and Supply and Fixing of New Landing door header suitable for 1000 kgs goods lift/13 Passengers/8 Passengers lift complete all as specified and directed by the Engr-in-charge

Taking out unserviceable Cabin fan from Car Cabin and supply and fixing Cabin Fan non-oscillating type, axial flow, single speed 300 mm sweep, 240 Volts ISI marked complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out old defective 3D infra red door sensor of any type and supply and fixing new 3D infra red door sensor conforming to IS 100-240V A 0.15 A 47-63 Hz 1 Ph Load 12V/0.2A upto full length of car door under Nofra, Colaba complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out unserviceable emergency alarm system complete and supply & fixing new emergency alarm system assembly on ground floor landing complete with PCB card battery backup charging unit and speaker including necessary control/electric connection wiring with COP and control panel complete all as specified and directed in Central machine shop and various other lift of Nofra area complete all as specified and directed by Engr-in-Charge Location: NOFRA

Taking down old car door VVVF drive and supply and fixing in replacement car door (VVVF) drive with all accessories confirming to IS and match with existing model, specifications and same capacity of exisiting items complete all as specified and directed by Engineer-in-Charge.Make- Yaskawa/fuji/as directed by GE

Complete Machine Overhauling by opening of Gear removing old dirty oil, cleaning & Replacing of new Gear oil refitting of the same with new packing & adjustment of thrust bearing & keeping it into perfect working order complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fixing new main steel wire rope 8 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight pulley and car cabin with clamps,nuts, bolts and washer etc complete all as specified and directed by Engineer-in-Charge.Make- Usha Martin/As Directed by GE

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fixing new main steel wire rope 13 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight, pulley and car cabin with clamps, nut, bolts and washers etc complete all as directed by Engineer-in-Charge Make : USHA MARTIN/ As directed by GE

Taking down unserviceable main pulley with complete set Supply & fixing new main pulley with complete set complete all as specified & directed by Engr-in-Charge.

Taking down unserviceable pit pulley and governor pulley with complete acessories and Supply & fixing new pit pulley and governor pulley complete all as specified & directed by Engr-in-Charge. Make- As existing at site location

Supply and laying aluminium strip of size 25x3 mm from test point to lift machine room (G+07 bldg) to be terminated to the control panel, machine and other equipment installed in machine room complete all as specified and directed by Engineer- in- charge

Supply and Fixing in replacement of Car and counterweight Buffer Spring with all accessories suitable for 06/08/13 Passenger Lifts for various Bldgs of Nofra, all as directed by engr-in-Charge.

Dismantling and taking out unserviceable car door from car cabin supply and fixing new car door comprises of 02 Nos power operated, auto telescopic / centre opening by horizontal sliding stainless steel panel of flush type panels complete with removeable headers, hangers, door drive unit with full beam infrared sensor up to full length of car door, aluminium sill VVVF door drive unit for motor complete with all accessories control connection etc. for for lift all as Specified and directed by Engr-in-Charge .

Dismantling and taking out old unserviceable main VVVF unit and supply and fixing new main VVVF drive unit suitable for 15 KW capacity in existing panel and connected with existing system including testing and commissioning confirming to same model with specification and same capacity of existing items complete for smooth and jerk free working of lift complete all as specified and directed by Engineer-in-Charge. Make- Yaskawa/Fuji/as Directed by GE

Monarch Enterprises (BID ID -3156725)

shakti engineering and electrical works (BID ID -3154328)

Shree Elevator Engineering Co. (BID ID -3151861)