NIT No. 36, Item No. 07 (2025-26)

Supply of MS Pipe "C" Class 150 mm dia, thickness 6 mm conforming to IS 1239 Part 1 (2004) Make : Tata/Jindal/ DJB Approved. (Payment will be paid as per actual)

Supply of nut bolts & washer as per required for reinstallation of pump set and valve etc. (Payment will be done as per actual work at site).

Supply High pressure packing, as per site requriement and direction of Engineer Incharge.

ISI mark MS Flanges for 150 mm dia pipe, as per site requriement and direction of Engineer Incharge.

Arrangement of all safety equipment for the protection of manpower to work at height and to make the working area free manual labour as per site requirement and direction of engineer-in-charge.

Dismantling of existing suction system of pump set not 1 & 2 with the help of gas cutter, specialized labour and manually chain pulley block etc. The work must be done one by one without affecting the water supply.

Excavation of earth pit approx 5.5 feet deep and approx 12 meter long, and laying the new MS line of 150 mm dia after taken out the rusted/damaged pipe line at floor level from the pit and refilling the pit by manual labours after completion of work at site.

Re-installation of all existing suction system (sluice valve, Taper Pieces etc.) with the help of tools and tackles, heavy manual labour as per site requirement and direction of engineer-in-charge.

Testing and commissioning of all the above at site on full pressure with Vibration free as per site requirement and direction of Engineer Incharge.