Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹8.5 L+₹23,154.61 (2.80%)Rejected-AOC | L2 | Rejected-AOC Rejected |
Tender Value
₹9.9 L
EMD Value
₹9,950
Closing Date
27 Nov 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Assistant Commissioner,
North Zone, Coimbatore Corporation, Balasundaram Road,Oppsite Womens Polytechnic
Improvement works to the ICDS center at Chinnamettupalayam in ward no.03,North Zone
2024_MAWS_501683_1
E3/NorthZone/2024-25
Open Tender
Civil Works - Buildings
Works
90 days
North Zone, Coimbatore Corporation
As per the tender condition attached
4 documents required · 4 mandatory
₹0
₹9,950
9 Jul 2025
18 Nov 2024
28 Nov 2024
18 Nov 2024
27 Nov 2024
18 Nov 2024
Amount
Earth work excavation in all soils with initial lead & lift etc. complete as per direction of departmental officers etc. completed.
Plain cement Concrete in1:4:8 mix (one cement, four sand,eight metal) using 40mm size Hard Broken stone as per the direction of departmental officers etc., complete
Random rubble masonry in c.m 1: 5 (one cement and five sand) using best new rough and bond stones including simultaneous pointing above ground level with the same mortor including curing, cost and conveyance of all materials and labour charges etc,complete as per SS.
Supplying and erecting centering for sides soffits including supports and strutting upto 3.29m high for plain surface such as rectangular column top and bottom slabs of boxing, sill, slabs, sun shade etc., in all floors using mild steel slabs of sizes 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25X25x3mm for boarding laid over country wood joists of size 10cm X 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 75cm C/C etc., complete as directed. Sl.No.123 C Part-II
Supplying, Fabricating and placing in position of mild steel or deformed steel up to 16mm dia bars for all reinforced cement concrete items of work including cost of steel transporting strengthening cutting, bending, cranking, binding, etc. including cost of binding wire MS Chairs, laps to fix the reinforcement in all positions, all labour and materials complete complying with standard specifications and drawings and as directed by the engineer.
Reinforced cement concrete of 1:1.5:3 mix (one cement, one and half of sand and three of aggregate) using Machine crushed hard broken granite stone jelly 20mm for RCC works in all types of foundation footings columns, Floor beams, slabs of all shapes (excluding cost of providing centering and fabrication of reinforcements which shall be measured and paid under separate items but including curing Etc. and including fixing fan clamps or hooks, after lying of electrical canduit pipes, junction boxes wherever required complete, complying with standard specificaions and Drawings and as directed by the engineer.
Damp proof course using cement mortor 1:3 including cost and conveyance of all materials to site and all labour charges, watering curing and all other incidental charges etc., complete complying with standard specification.
Providing Table Top with GRANITE Slab in cement mortar 1:3 (One cement and three sand) base above the existing bed concrete and pointed with same color cement added.
S/F OF CUDAPPA SLAB of approved quality and colour of size all floors over 40mm thick cement mortar 1:3 (One cement and three sand) base above the existing bed concrete and pointed with same color cement added.
Brick work in cement mortar 1:5 mix (one cement five sand) using II class table molded bricks chamber burnt bricks of size 9" X 4 1/2" X 3" for the following including curing etc., completed.
Plastering with C.M. 1:5 Mix (one cement and five sand) 12mm thick finishing including cost and conveyance of all materials to site and all labour charges, watering curing and all other incidental charges etc., complete complying with standard specification.
Fillling with gravel layers well rammed, watered and compacted, complying with standard specification etc., complete.
Flooring finishing with first quality design ceramaic tiles of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2
Flooring finishing with antiskid tiles of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete complying with standard specification
Solid PVC door shutter using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fix in position including necessary furniture and fittings. The cover all size of top rail, Lock rail and bottom rail shall be 70mm x 45mm, with suitable rebate for housing the shutter
Supply and fixing of MS Doors, Window using L angle, Flat, Sqaure Rod & MS sheet including all Fabrication Charges, Conveyance cost etc complete as per directional of departmental officers
Painting with plastic emulsion paint two coats over base coat for new plastered surface for using best quality and aproved colour of oil bound distemper conforming to ISI specification etc., complete complying as directed by the departmental officers as per standard specification.
Painting with enamal paint two coats for new Iron work including one coat of priming coat and using the best quality Iron primer and best quality synthetic enamel paint etc complete complying with standard specification
Supplying and fixing in position of Indian make colour water closet of size in 580mm * 440mm weight glassed earthan ware of approved with P Trap (or) S Trap and foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m. 1:3 12 mm thick including fixing in position leveling complete with necessary connection as per standard specification
Supply and Fixing in position of Indian make White glazed earthware WASH BASIN 550mmx400mm with all accessories such as costIron brackets , 32mm dia C.P waste coupling 15mm dia G.M wheel valve ,15mm dia Nylon connection , 15mm dia Brass Nipples, 15mm C.P Pillar tap etc., complete.
Supply and Fixing of SS Sink Size of 600mm x 450mm x 200mm etc complete as per directional of departmental officers
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete
Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC sheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe cealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator).
wiring with 2x1.5sq mm (22/.3) PVC insulated SC unsheathed copper conductore cable of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in flush with wall with 150mmx100mmx75mm MS switch box with 3mm thick hylem sheet cover for 5A 3pin interlocking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed Plug point. (SD 12)
Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V)32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.
Supply and run of 2 of 4 sq.m (56/0.3)PVC insulated SC unsheathed CU.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.(SD 44)
Supply and fixing of WT bulk head fitting with guard (Phillips/Bajaj/Crompton/K.Lite) Suitable for incandescent lamp with 11 Watts CFL Bulb Bulb(SD 83)
Supply and fixing of single box type 4"40W flu fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube (SD 87)
Supplying and fixing of 1200mm(48")sweep AC ceiling fan complete with stepped electronic 300W Regulator with 1 metre down rod with fan clamp with side plates and crpss arm of size 450mm(16") (SD 106)
Supply and Fixing of 30W LED Street light Fitting with necessary Bowl and Bracket and Bulp as per Standard Quality as per the Direction of the Departmental officers etc., complete.
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall
Supplying and fixing of 15 A aerial fuse unit (500A)on suitable 100x100 mm TW concealed box with iron sheet on the tapping pole with necessary clamps.(SD 128)
Supplying and fixing of RCC Ring of 1200mm including loading, unloading and conveyance charges etc complete as per directional of departmental officers
Supplying and fixing of RCC Ring Cover of 1200mm including loading, unloading and conveyance charges etc complete as per directional of departmental officers
supplying and fixing of PVC Pipes and specials including cost of materials to site and all other labour charges.etc
63mm UPVC Pipe
63mm Coupling
63mm UPVC Tee
63mm UPVC Bend
63mm UPVC Elbow
63mm UPVC Union
110mm PVC Pipe For Waste Water
90mm PVC Pipe For Waste Water
Door Elbow 90mm
Elbow 90mm
Bend 90mm
Door Elbow 110mm
Elbow 110mm
Bend 110mm
painting with Enamel Paint for Arts and letter writing as per direction of departmental officers etc,complete
S/F OF CUDAPPA SLAB of approved quality and colour of size all floors over 40mm thick cement mortar 1:3 (One cement and three sand) base above the existing bed concrete and pointed with same color cement added.
Add :- GST @ 18%
SRI SPS ASSOCIATES (BID ID -1189733)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_596739.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .