General fund- 2025-26 Construction of Mordern Arch, Widening of Paver Block Pathway, Decorative Street Light, Kids and Children Park and Open Gym at B.Eri in Gingee Town Panchayat, Villupuram District

Amount

Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, levelling, sectioning breaking clods etc., in all incidental charges etc., complete as per standard specification .FootingFooting

Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, levelling, sectioning breaking clods etc., in all incidental charges etc., complete as per standard specification Kerb Wall

Plain Cement Concrete 1:4:8 Mix (one part cement, four part M.Sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. Below GL

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers Foundation & Basement

For Ground floor

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.(For 10 M3) - For foundation & basement

In Ground floor

Plastering in Cement Mortor 1:3 Mix (one cement, Three sand) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Plain Cement Concrete 1:2:4 (One Cement, Two sand and Four broken stone jelly) using 20mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:2:4 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:2:4 (One Cement, Two sand and Four broken stone jelly). Dummy columns should be at least 1 metre height)

Providing and Laying, Spreading and Compacting graded stone aggregates to Wet Mix Macadam 150mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of M

Rubberised Interlocking Paver Block M40 grade providing and laying of 63 mm thick heigh strength type confiriming IS 15658 - 2006 of Rubberised Interlocking Paver Block in required size of mininmum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flumying bore pattern with approved nin - sticking surface in the top and the rate including levelling the base Stone dust cushion 100mm thick laying out the pavement cut the pieus to fit edge, vibrating pavers, sweeping transporting leading unloading as per standard specification.

Supplying, Delivery and fixing of 100 mm dia GI Pipe including all cost of materials and other chrges etc complete complying with standard Specifications

Providing fencing with chain link diamond mesh 50mm x 50mm size made of 10 swg GI wire,including the cost of G.I binding wire and top of the mesh linked with 10 swg GI wire etc., completed-. 10m2.( consider 30m x 1.80m )

Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Supply, erection, and fixing of Shoulder Wheel equipped with Vertical post of 1no’s. (CR circular Pipe of 3mm thick)of size 867×737×1703mm steering wheel 2 No’s. of dia35 inches made of 1.5 inches dia Ms pipe ( 3mm Thick) interior cross bars 4No’s. with provision for handles fixed with vertical post at a height of 52 inches and 47 inches from floor levelon opposite sides with necessary provisions for bearing. All materials used are of heavy duty branded sealed ball bearing for long lasting life with Powder Coating Painting for grazy finish with foundation clamb etc., complete

Supply , Erection and Fixing Of Arm & Shoulder Wheels 1300×1200×1350mm 4mm Pipe main Post Made Of 4 Inch Pipe and Other Pipes 1-1/2 Inch Pipes. 3mm Thickness Pipes Heavy Duty Brandedd Sealed Ball Bearing For Long Lasting Life with Powder Coating Painting for grazy finish with foundation clamb etc., complete

Supply, erection, and fixing of Twister equipped with Vertical post of 1no’s. (MS circular Pipe of 3mm thick)of size 1463×1310×1158mm Hanle made of 1.5 inches dia Ms pipe ( 3mm Thick) circular platform 3 No’s. 380mm dia made of checked FRP platform with necessary provisions for bearing. All materials used are of heavy duty branded sealed ball bearing for long lasting life with Powder Coating Painting for grazy finish with foundation clamb etc., complete

Supply , Erection and Fixing Of Leg Press Size : 2000mm×405mm×1660mm, Area Of 7.4 Sq Ft Main Post Made Of 4 Inch Pipe and Other Main Pipes 1-1/2 Inch Pipes. 3mm Thickness Pipes. FRP Seat Heavy Duty Branded Sealed Ball Bearing. Steel Foot Rest / Foot Paddle For Long Lastig Life. with Powder Coating Painting for grazy finish with foundation clamb etc., complete

Supply , Erection and Fixing Of Double Air Walker Product Area : (2020×615×1409)Mm Safe Play Area: (4460x3700)Mm Main Frame : 114mm Od Ms B-Class Pipe . Leg Frame : 48mm Od Ms C-Class Pipe & Ms Plate. Handle Frame : 32mm Od Ms C-Class Pipe , With Sealed Ball Bearing, FRP Seat, And Footrest / Foot Paddle For Long Lasting Life With Powder Coating Painting For Grazy Finish With Foundation Clamb Etc., Complete

Supply, erection, and fixing of a seated chest press equipped with Vertical post of 1no’s. (MS circular Pipe of 3mm thick)of size 2487×805×2052mm Hanle made of 1.5 inches dia Ms pipe ( 3mm Thick) fixed with vertical post on top. chair 2 no’s. fixed in 1.5 inches dia circular pipe 3mm thick at a height of 8” from floor level with necessary provisions for bearing. All materials used are of heavy duty branded sealed ball bearing for long lasting life with Powder Coating Painting for grazy finish with foundation clamb etc., complete

Supply, erection, and fixing of Pushup Bar Play Area : 6 x 6 Ft Manufacturing of pushup bar is used b class cr pipes with anti-rusting treatment with Powder Coating Painting for grazy finish with foundation clamb etc., complete

Supply, erection, and fixing of Sky Walker excerciser equipped with Vertical post of 1no’s. (MS circular Pipe of 3mm thick)of size 1148×585×1486mm Hanle made of 1.1/4 inches dia Ms pipe ( 3mm Thick) fixed with 1.5 Inches Dia ( 3mm Thick) vertical post on top foot rest 2 no’s. fixed in 50×25mm MS square pipe 3mm thick at a height of 8” from floor level with necessary provisions for bearing. All materials used are of heavy duty branded sealed ball bearing for long lasting life with Powder Coating Painting for grazy finish with foundation clamb etc., complete

Supply, erection, and fixing of Single Bar Play Area : 6FT x 4FT. Manufacturing of single bar is used b class cr pipes with anti-rusting treatment with Powder Coating Painting for grazy finish with foundation clamb etc., complete

Supply, erection, and fixing of Double Bar The Manufacturing Of Parallel Bar Is Used 60mm – 2 Meters Vertical CRP Pipe 4 No’s. And 48mm – 1.84 Meters Horizontal CRP Pipe 2 No’s And Including Fixing With Powder Coating Painting

Supply, erection, and fixing of eliptical excerciser equipped with Vertical post of 1no’s. (MS circular Pipe of 3mm thick)of size 1148×585×1486mm Hanle made of 1.5 inches dia Ms pipe ( 3mm Thick) fixed with vertical post on top foot rest 2 no’s. fixed in 50×25mm MS square pipe 3mm thick at a height of 8” from floor level with necessary provisions for bearing. All materials used are of heavy duty branded sealed ball bearing for long lasting life with Powder Coating Painting for grazy finish with foundation clamb etc., complete

Supply and fixing of See-Saw 4 Seater FRP: Height:1½' 'ft Width:5'ft Frame: 1 " Galvanished 'B' Class pipe See saw Rail :2" Galvanished 'C' Class pipe Seat: FRP Seat with 450 CSM Mat 3 Layers bonding. Isotolic gel coat with Powder Coated Painting for grazy finish with foundation clamb etc., complete

Manufacturing supply and erection of swing made of b class cr pipes dimensions height 3.048m, lenth of 3.06m tested molded stain less steel chains. Seating arrangments made by frp seat including one coat of anti rust epoxy primer with Powder Coated Painting for grazy finish with foundation clamb etc., complete

Supply, erection, and fixing of Flat Rotor Made Of B Class Heavy Ms Pipe Main Pipe Dia, 12 Guje , Sheet [2mm To 3mm Griping Pipe Use 31mm, And Skf Double Z Brand Bearing Used For All Functioning. Pu Powder Coating Material. Round Iron Revolving Platform - Standing, Size: 5" Dia ; Material, Iron ; Location Type, Outdoor ; Age Group, 5-12 ; Diameter, 5'

Supply , Erection and Fixing Of Wall Mountain and Rope Claimber The Frame Is Made Of Galvanized Steel, While The Climbing Wall Is Constructed From High-Quality, Weather-Resistant Material With Anti-Slip Grips, This Multi-Functional Climbing Unit Features A Sturdy Steel Frame With Two Climbing Challenges: A Colorful Rock Climbing Wall And A Durable Rope Ladder. The Climbing Wall Is Equipped With Non-Slip Grips, Making It Safe For Kids To Scale, While The Rope Ladder Provides An Additional Fun Way To Climb.

Supply , Erection and Fixing Of Multiple System Set SPIRAL SLIDE 8 FT, OPEN SLIDE 10 FT, TUNNEL 8 FT, DOUBLE SLIDE 10 FT WITH ARCH, PLATFORM – 3, STRAIGHT BRIDGE - 1, ROOF – 2, ANIMAL MAADAM – 3, TWISTER WITH ROMAN RINGS, SWING 2 SEAT, LADDER, AREA SIZE - 40×20

Supply, erection, and fixing of a Kids Elephant Slide With Swing Good Quality of Materials are Used and All materials used are of heavy duty branded sealed ball bearing for long lasting life with Powder Coating Painting for grazy finish with foundation clamb etc., complete

Supply, erection, and fixing of a Kids Elephant Slide Good Quality of Materials are Used and All materials used are of heavy duty branded sealed ball bearing for long lasting life with Powder Coating Painting for grazy finish with foundation clamb etc., complete

Supply, erection, and fixing of a Horse Rider Good Quality of Materials are Used and All materials used are of heavy duty branded sealed ball bearing for long lasting life with Powder Coating Painting for grazy finish with foundation clamb etc., complete

Supply and Fixing of Decorative Street Light: 4 Metre Length Double Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 4000mm Length, 48W LED Street Light Fitting with LED including cost of all labour charges etc

Supply, erection, and fixing of Concrete Benches Are A Popular Choice For Public Spaces Due To Their Durability And Low Maintenance Requirements. They Can Withstand Harsh Weather Conditions And Heavy Use, Making Them Perfect For Areas With High Traffic.

Supply, erection, and fixing of Retro Reflective Walkway signage including Cost and conveyance all material and labour charges etc.,.

R Saravanan (BID ID -1509748)