Fabrication and Erection of 2 nos Portable Cabin with electrification for CISF Check Post at different location of AKKOCP ,under BnK Area.

Amount

Earth work in surface excavation not noteding 30 on in depth brat xoeding 1.5 min with as well as 10 son on plan trobeling gefing out and daposal of excavatet narth upto 50 and it upto 1.5 ms directed to Engineerie-Charge

Surface dressing of the ground encoding removing vegetation and in equalties not exceeding 15 on deep and disposal of shled 50 and up to 1.5m

Filing available excavated earth excluding rock in trenches, plinth es of foundations etc. in layers not exceeding 20cm in depth consolidisting each deposited layer by rasming and watering, lead upho 50m and for al

Providing and laying in poortion cement concrete of spacilled ginde excluding the cost of certering and shutering-All work up to plinth level 1.36 (1 сетен: 3 anse sand (zone 170 derived from natural sourcen graded stone aggregate 40nem nominal siz

Providing corrugated GS et moling including vertical/oned surface fixed with polymer coated Jor L hooks, bolls and usin dameter with bitumen and Gempel washers or with pe washers fed wit nad, including a coat of approved steel primer and two coets of approved paint on overlapping of sheets complete to any prich in hortzontal wertical or curved surficie duding the cost of purlins, rafters and trustes and including cutting to size and shape wherever required. 0,80 mm thick with zinc coating not less than 275 gm/m

Providing and fong protegalvanised on petish ( shape and pitch of coma in epoved by Engineer in Charge) of total coated thicks 0:00 mes (bese metal of man tridinens with total couling fickens of 0.05ent with zinc coeling 120gmma per ogn an perts. 277, 240m paster, 5-7 poxy primer on both sick of the sheet and polyester bycoat 15-18microns. Sheet should have plate guard fl of 25 microns merun to avoid scrutches during transportation and should be suppl single levegth upto 12metrs or an desired by Engine-in-charge. The 571.00 1.28.475.00 1250 X ☆ sheet shall be fixed using self lingtself tapping screws of size 5.5x 55mm) win EPCM complete upto any pilich in horizontall vertical or curvedsurfaces, excluding the cost of purtins, rafters and trusses and including cutting to size and shape wherever required

Structural steel work riveled, boted or welded in built up sections, trusses and framed work, including orting, hoisting, faxing in position and 7 applying a priming coat of approved steel primer all complete

12mm thick pre-laminated particle board (decorative laminationonbothsides) grade-1,nmediumdensity flat pressed, three layer Iparticleboard FPT-Ior graded woodparticleboardFPT-I, conforrming to IS :3087, bondedwithBWPtypesynhetic resinadhesiveasper is.848andprelaminated conforming to IS: 12823, Grade 1, Type -ll marked

Supplying and fxing following way, horizontal type three pole and neutral, sheet steel, MOB distibution board,415 V, on surfacel recess, Complete with tinned copper bus bar, neutral bus bar, eanth bar, din bar, interconnections, powder painted induding earthing etc. as required. (But without MCBIRCCBlsolator) 4 way (4 + 12), Double doo

Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual curent circuit breaker (RCCB), having a sensitivity çurrent 30mA in the existing MCB DB Complete with connections, testing and commissioning etc. as required. 25A

Provding and ixing tollowing capaciy TP&N disConnector fuseswitch unt inside the existing panel boardwith ISI marked HRCÍusesincluding drilling holes in cubicle panel, making connections, letc as reguired 32A TP&N

Wiring ior light point fan point exhaust fan point cal bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surtace / recessed medium class PVC conduit, with piano type switch, phenolic larrinated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Supplying and ixing metal box of 150 mm X75mm X60mm deep (nominal size) on surlace or in recess with suitable size of phenolic laminated sheet cover in front inciuding providing and fxing 3 pin 5/6 lamps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 8& 15/16 amps modular socket outilet and 15/16 amps modular switch, connection etc. as required.

|Supplying and drawing 2 x4 sq. mm of FRLS PVC insulated copper conductor, single core cable in the exsting surface recessed steeV PVC Jconduit as required.

Total impact of GST for the purpose of CTC

SANTOSH KUMAR SINGH (BID ID -1177791)