8382 REPAIRS TO FALSE CEILING WALLS FLOORS PLUMBING AND SANITARY FITTINGS IRON MONGRY AND MISC ITEMS IN OTM ACCN AT LOWER COMMAND HOSPITAL UNDER GE (CENTRAL) PUNE

Amount

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) exc 1.50 Sqm but not exc 4.00 Sqm & removing from site all as directed.

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) area not exc 1.50 Sqm & removing from site all as directed.

Taking down shutter of any description and area exc 1.00 Sqm but not exc 2.00 Sqm in each leaf & removing from site all as directed.

Taking down shutter of any description and area not exc 1.00 Sqm in each leaf & removing from site all as directed.

S & F 2nd class hard wood plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc one brick but not exc two bricks & making good disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S & F mild steel flat iron hold fasts fitted to chowkats with nails & welded to angle iron frames complete all as specified and directed.

S & F 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F Factory made plain colour (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 180 of SSR 2004 Part-II complete all as specified and directed.

S & F factory made plain colour (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg given on page 176 of SSR 2020 Part II The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II.

Taking down Shutters of any description area not exc 1.00 Sqm each and refixing in the same opening after carrying out necessary Resecuring or easing & adjusting / minor repairs etc all as specified and as directed.

Taking down Shutters of any description area not exc 1.00 Sqm but not exc 2 Sqm each and refixing in the same opening after carrying out necessary Resecuring or easing & adjusting / minor repairs etc all as specified and as directed.

S & F 100mm long mild steel but hinges medium weight cold rolled complete all as specified and directed. .

S & F in repairs 100 mm long mild steel but hinges medium weight colld rolled complete all as specified and directed. .

S & F 150mm long Aluminium powder coated barrel tower bolt of extruded section complete all as specified and directed..

S & F in repairs 150mm long Aluminium powder coated barrel tower bolt of extruded section complete all as specified and directed. .

S & F 100mm long Aluminium powder coated barrel tower bolt of extruded section complete all as specified and directed..

Supply and fix 150mm long extruded aluminium alloy powder handles fabricated type complete all as specified and directed.

Supply and fix in repairs 150mm long extruded aluminium alloy powder coated handles fabricated type anodised complete all as specified and directed.

Supply and fix 100mm long extruded aluminium alloy powder handles fabricated type complete all as specified and directed.

S & F 300mm long Aluminium alloy powder coated sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. .

S & F in repairs 300mm long Aluminium alloy powder coated sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alu allow complete all as specified and directed.

Supply and fix in repairs 150mm floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate complete all as specified and as directed.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply & fix in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs 25mm dia decorative type curtain rod , stainless steel with not less than 1.00mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as directed.

S & F 3.00mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

S & F 3.00mm thick figured glass, pin headed type and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

M & L for preparation of new wooden surfaces over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

M & L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer all as specified and directed.

S & F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30mm all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed.

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F 75mm aluminium anodised Hasp and staple , safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S & F Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

S & F Powder coated aluminium door shutters, (single / double leaf) aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminum snap beading , screws etc. complete all as specified. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, neoprene rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S&F door closer (aluminium extuded body section) hydreulically regulated, ,designation No 1 universal type, suitable for door shutters up to 700mm in width and of wieght not more than 35Kg complete all as specified and directed.

S & F 100mm in mild steel 4 Lever mortice lock, vertical type of size all as directed.

S & F in repair 100mm mild steel 4 Lever mortice lock, vertical type all as specified and directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 including dismantling of brick or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished the surface even and smooth without using extra cement all as specified and directed

M & L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in CM 1:6 finished the surface even and smooth without extra cement including taking down old cement plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without extra cement including taking down old cement plaster including raking out joints, hacking for key, scrubbing down with water completeall as specified and directed.

M & L for three coat of white wash to newly plastered surfaces of walls including preparation of surfaces all as specified and directed.

M & L for two coats of oil bound distemper over a coat alkali resistent primer on newly plastered surfaces of walls including preparation of surfaces all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris out side of defence land complete all as directed.

Material and labour for Non skid coloured ceramic tiles of size 300mm x 300mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as specified and directed.

M & L for colored glazed ceramic tiles of size 300mm x 450mm x 7 to 8mm thick (Matt Finish) on vertical surfaces set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick backing coat in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work or on one side of lathing to receive / fixing dado/ skirting tile all as specified and directed.

Dismantling of stone slab in any description or thickness, laid bedded jointed in any morter all as directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

M & L 20-25mm thick Machine cut cudappah stone slab over and including cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete all as directed.

M & L for 20 to 25mm thick machine cut Kota stone of size 400 x 550mm (minimum) as in flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed .

All as per item No 59 above but kota stone slab as in riser of steps, skirting , dado and pillar and applying oxalic acid ,wax polish to obtain mirror polish finished laid over and including 10mm thick including 10mm thick baking coat of CM 1:3 complete all as specified and directed .

Material and labour Virified Ceramic tiles (Full body) of size 600mm x 600mm x 10 mm thick (square/ rectangular) polished, as in skirting, set and jointed in neat cement slurrry and pointed in white or coloured cement to match, over & including 10mm thick backing coat in CM (1:4) all as specified and directed.

All as per item No 61 above but as in skirting over & including 10mm thick backing coat of CM 1:4 on concrete or cement plaster surfaces all as specified and directed.

Drilling holes for bolts, pipes etc not exc 25mm dia in granite or trape stone for gas connection pipe all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations all as specified and directed.

Supply and Fix in repairs vitreous china coloured Wash hand basin flat back, size 580 x 450mm white excluding pillar taps & waste pipe but including Waste coupling chromium plated and fixing brackets complete all as specified and directed.

S & F in repairs Vitreous china coloured Wash Hand Basin Counter Top of Size 530mm x 440 x 200mm excluding pillar taps & waste pipe but including Waste coupling chromium plated complete all as specified and directed. Make :- Cat No ECS-WHT- 601 or equivalent.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, seat cover and jet spray etc (excluding flushing cistern and flush pipe) complete connected to drain complete all as specified and directed.

S & F in repairs plastic water closet seat cover black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.

S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

Supply and fix in repairs Vitreous China bowl urinal flat back, white of size of 465 x 355 x 265mm (minimum), with fixing accessories , fixing plugs, grating and union (Exclusive of supply & fixing of flushing cistern, trap and waste pipe) fixed to walls and connect complete all as specified and directed.

S & F in repairs 15mm bore dia stop cock copper alloy, chromium plated , fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S & F in repairs 15mm bore dia bib taps cast cipper alloy with crutch or butterfly handle, chromium plated, fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs chromium plated, Health faucet spray with 1.5 Mtr long flexible cord with hose and hook complete all as specified and directed.

Supply and fix in repairs 15mm bore dia Bib taps two way type , cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 32/50mm bore dia PVC waste pipe for kitchen sink , WHB , Urinal etc complete all as specified and directed.

Supply and fix in repairs 15mm bore dia swan neck pillar taps, cast copper with capstan head , chromium plated, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed.

S & F in repair Brass chromium plated wall mixer (2-in-1) for mixing hot & cold water screwed down for iron pipe all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT nuts to length 450mm all as specified and directed.

S & F in repairs Brass, Chromium plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

S & F in repairs Soap dish, Stainless steel or Chromium plated, fixed to plugs with chromium plated brass screws all as specified and directed.

Supply and fix in repairs 125mm size brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S & F in repairs S S grating dome of 100mm dia (minimum weight - 25gms) to floor traps all as specified and directed.

Taking down 15mm bore dia steel tubing and connections and removing from site all as directed.

Taking down 20mm bore dia steel tubing and connections and removing from site all as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth all as directed.

M & L for GI tubing 15mm bore dia medium grade concealed including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors complete all as specified and directed.

M & L for GI tubing 20mm bore dia medium grade concealed including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors complete all as specified and directed.

Supply and Fix 15mm bore dia of CPVC pipes SDR 11 concealed & Plain CPVC SDR 11 fittings fixed to walls / ceiling or laid in floors / trenches including all required fittings complete all as specified and directed.

S & F 20mm bore dia UPVC pipes of pressure rating 10 Kgf/Sqcm fixed to walls, ceilings or laid in floors etc complete all as specified and directed.

Supply and fix 75mm bore dia out let PVC (SWR) floor trap / Nahani trap, plain with grating including jointing with solvent cement complete specified and directed.

S & F in repair 110mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S & F in repair 75mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S & F stack clamps suitable for 100mm bore dia pipe made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as directed and specified.

S & F 110mm bore dia PVC (SWR) bends with access door of any radius complete all as directed and specified.

S & F 75mm bore dia PVC(SWR) bends with access door of any radius complete all as directed and specified.

S & F 110mm bore dia PVC (SWR) bends of any radius complete all as directed and specified.

S & F 75mm bore dia PVC (SWR) bends of any radius complete all as directed and specified.

S & F 110mm bore dia PVC (SWR) vent cowl complete all as directed and specified.

S & F in repairs stainless steel kitchen sink without drainage board made of stainless steel 1.00mm thick with plugs washers and waste including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm , bowl size 410 mm x 330mm x 160mm complete all as specified and directed.

S & F 500 Litre capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

S & F 1000 Litre capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets any thickness including cover fillets all as directed.

S & F False ceiling using Non Asbestos (Fiber cement) decorative tiles of Size 595mm x 595mm x 4mm thick including GI snap grid of size (600mm x 600mm) using hot dipped galvanised steel section, exposed surface with pre-coated capping main Tee of size 24 x 38mm x 0.5mm thick at every 1200mm center to center maximum and rotary stitched cross tee of size 24mm x 32mm x 0.5mm thick at 1200mm center to center and wall angle of size 19 x 19mm x 0.5mm thick fixed to the periphery of the wall. The above grid is suspended at every 1200mm center to center in both directions using 2.0mm thick pre-straightened GI wire on main runners including making niches for fans / light complete all as specified and directed.

Dismantling of boarding, any description fixed in any position with nails i.e. in cupboard shutters, partitions, false ceiling and wall lining etc and similar position fixed with nail or screws complete all as directed.

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins etc under 40 Sqcm area in cross section complete all as directed.

M & L 2nd class hardwood Plain fillets square, rectangular or triangular in section, cross sectional area exc13Sqcm but not exc 25Sqcm, clean sawn, secured with screws etc complete all as specified and directed.

M & L 12mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work with including 1.50mm thick decorative laminate sheet type-I , surface finish, colour and pattern as approved by GE fixed with adhesive as per manufacturer's instructions complete all as specified and directed.

M & L 1st class hardwood Moulding as in cornices, picture rails and the like fixed with screws, sectional area exc 6Sqcm but not exc 13Sqcm etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed.

S & F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle leats or other connecting plates , Fe-410-W (Grade-E-250) quality 'A' complete all as specified and directed.

S & F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings all as directed.

S & F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Manglore pattern Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Polycarbonate sheet 1.50mm thick of an colour having Specific gravity not less than 1.20 Kg per Sqm as in roof covering / cladding to wall and ridge in shape (round and domes), fixed with self tapping screws or otherwise specified as directed by Engineer-in-charge complete. Make :- Arihant Enterprises, Acrylic Sheet india, Vijay Agencies.

S & F stainless steel (Grade-304) railing made out of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting with necessary stainless steel nuts and bolts with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement including dismantling of od stainless steel railing complete all as specified and directed.

Gauri Associates

REKHA ELECTRICALS

Mukund Engineers and Contractors

M/s.BAJRANG CONSTRUCTION

Anand Trading Co

Parhar Enterprise

Suma Construction