Loading
Loading…
Loading…
Tender Value
₹27.4 Cr
EMD Value
₹15.2 L
Closing Date
18 Dec 2025, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
13 conditions · 2 needing a document upload
As per GCC 10(b):- The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; Where: V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
Technical Eligibility Criteria: - As mentioned in GCC 2022 clause 10(a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. The work is executed for similar nature of work as under: Supply / Laying, jointing, testing & commissioning of HT cabling work equivalent or higher voltage grade cable.. The work must have been carried out in any of the following organizations: a) Central Government departments or State Government departments. b) Central government PSUs or State Government PSUs. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs.500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
9 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
TENDER FORM (First Sheet) (Ref: Page Nos.9 & 10 of GCC April 2022).
Certificate stating that the tenderer/s are not liable to be disqualified and all their statements / documents submitted along with bid are true and factual as per Annexure-V (Ref: PARA 6.1 of Part-I, Instruction to Tenderers(ITT) at Page Nos.7 & 33@ 45"10@of GCC April 2022).
In case the tenderer is other than Joint Venture (JV) firm, tenderer has to submit all the documents as mentioned below (Ref: Clause 14 (ii) (a) to (c), (e) to (g), (iv) & 18.10 of TENDER FORM (Second Sheet) at Page Nos.17-18 of GCC April 2022).
In case the tenderer is a Joint Venture (JV) firm, tenderer has to submit all the documents as mentioned below: (i)Copy of Memorandum of Understanding (MoU) duly executed by the JV members on a stamp paper, shall be submitted by the JV along with the tender. The complete details of the members of the JV, their share and responsibility in the JV etc. particularly with reference to financial, technical and other obligations shall be furnished in the MoU. (Ref: Clause 17.6 of TENDER FORM (Second Sheet) at Page Nos. 21 of GCC April 2022 & AppendixVIII of the Tender Document). (ii)Documents of JV Members: (Ref: Clause 17.14 of TENDER FORM (Second Sheet) at Page Nos.22-24 of GCC April 2022) (iii)All other documents in terms of Para 10 of the TENDER FORM (Second Sheet) at Page Nos.12-16 of GCC April 2022
Copy of Goods and Services Tax (GST) Registration Certificate containing GST Registration Number PAN Card, Aadhaar Card
Electrical Contractor License.
Supervisor license
Documents for evaluating the Bid Capacity, for tenders having advertised value more than Rs.20.00 crore. (Ref: Clause 10.3 and for tenderer participating as JV firm Clause 17.15.3 of TENDER FORM (Second Sheet) along with Annexure-VI, at Page Nos.14, 25 & 35-36 of GCC April 2022).
Design, supply, shifting, modification, erection, testing and commissioning required for removal of HT/LT electrical infringements in the entire Mumbai Division, Central Railway.
LCF-DR-GS-499-2025-19~CR
LCF-DR-GS-499-2025-19
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹15.2 L
18 Dec 2025
25 Nov 2025
4 Dec 2025
311 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 27,44,89,932 | ||
| — | 40.00 | — | — | ||
| Preparation of designs & drawing for underground cable and cable layout plan | — | — | — | 2,40,240 | |
| — | 10.00 | — | — | ||
| Supply of 315/400 amps TPN MCCB in Sheet encloser with HRC fuses | — | — | — | 1,93,260 | |
| — | 10.00 | — | — | ||
| Erection, Testing & Commissioning of 315/400 amps TPN MCCB in Sheet encloser with HRC fuses | — | — | — | 48,310 | |
| — | 6.00 | — | — | ||
| Supply of 250 amps TPN MCCB in Sheet encloser with HRC fuses | — | — | — | 51,498 | |
| — | 6.00 | — | — | ||
| Erection, Testing & Commissioning of 250 amps TPN MCCB in Sheet encloser with HRC fuses | — | — | — | 12,876 | |
| — | 10.00 | — | — | ||
| "Supply of 4 way Pillar distribution Board as per specification enclosed. i/c - 4 pole, 400 A, MCCB o/g - 4 No, 250 A, HRC Fuse" | — | — | — | 12,44,590 | |
| — | 10.00 | — | — | ||
| "Erection, testing and commissioning of 4 way Pillar distribution Board as per specification enclosed. i/c - 4 pole, 400 A, MCCB o/g - 4 No, 250 A, HRC Fuse" | — | — | — | 12,940 | |
| — | 12.00 | — | — | ||
| Supply of Mini Feeder pillars per MSEDCL specification. 1 x 400 / 250 A I/C HRC fuses | — | — | — | 2,82,156 | |
| — | 12.00 | — | — | ||
| Erection, testing commissioning of Mini Feeder pillars per MSEDCL specification. 1 x 400 / 250 A I/C HRC fuses | — | — | — | 14,856 | |
| — | 6.00 | — | — | ||
| Supply of LT distribution panel, 2 x 400 amps 4 pole MCCB as incomer. 400 amps automatic changeover switch with all necessary protection. 2 x 200 A 4P MCCB, 2 x 125 apms 4P MCCB, 3 x 100A 4P MCCB as outgoing with copper busbar and wiring arrangement as per site requiremnt. | — | — | — | 20,38,032 | |
| — | 6.00 | — | — | ||
| Erection, testing & commissioning of LT distribution panel, 2 x 400 amps 4 pole MCCB as incomer. 400 amps automatic changeover switch with all necessary protection. 2 x 200 A 4P MCCB, 2 x 125 apms 4P MCCB, 3 x 100A 4P MCCB as outgoing with copper busbar and wiring arrangement as per site requiremnt. | — | — | — | 5,09,508 | |
| — | 4.00 | — | — | ||
| Design, fabrication, Supply of LT Distribution/Panel board having thermal magnetic MCCB's 250A 4P 36kA breaking capacity- 2 no. as incomer and automatic change over switch 250 A 36 kA breaking capacity-1No with inbuilt time delay primary protection against single phasing & over voltage, and 200 A 4P MCCB 36 kA breaking capacity - 1 nos., 125 A 4P MCCB 16kA breaking capacity- 2 Nos., 100 A 4P MCCB 16 kA breaking capacity-3 Nos. as outgoing with 250A Copper busbar, Rotary Handle vary Depth, Padlock support for operating Handle, Phase barrier, DPX spreader Links, etc. as required and complete in all respect. | — | — | — | 13,99,936 | |
| — | 4.00 | — | — | ||
| Multiple loading / unloading, storing, installation, fixing, testing Nos. & commissioning LT Distribution/Panel board having thermal magnetic MCCB's 250A 4P 36kA breaking capacity- 2 no. as incomer and automatic change over switch 250 A 36 kA breaking capacity-1No with inbuilt time delay primary protection against single phasing & over voltage, and 200 A 4P MCCB 36 kA breaking capacity - 1 nos., 125 A 4P MCCB 16kA breaking capacity-2 Nos., 100 A 4P MCCB 16 kA breaking capacity-3 Nos. as outgoing with 250A Copper busbar, Rotary Handle vary Depth, Padlock support for operating Handle, Phase barrier, DPX spreader Links, etc. as required and complete in all respect. | — | — | — | 3,49,984 | |
| — | 40.00 | — | — | ||
| Supplying 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no.OH- PL/OPL. | — | — | — | 5,10,880 | |
| — | 40.00 | — | — | ||
| Erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no.OH-PL/OPL. | — | — | — | 44,600 | |
| — | 40.00 | — | — | ||
| Supply of material for M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). | — | — | — | 88,680 | |
| — | 40.00 | — | — | ||
| Erection of material & Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). | — | — | — | 34,560 | |
| — | 70.00 | — | — | ||
| Supplying LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2. | — | — | — | 3,32,710 | |
| — | 70.00 | — | — | ||
| Erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2. | — | — | — | 9,800 | |
| — | 10.00 | — | — | ||
| Supply of galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OHPL/ PBKT | — | — | — | 47,530 | |
| — | 10.00 | — | — | ||
| Erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OHPL/ PBKT | — | — | — | 1,400 | |
| — | 30.00 | — | — | ||
| Supply of galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT | — | — | — | 1,70,130 | |
| — | 30.00 | — | — | ||
| Erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT | — | — | — | 2,790 | |
| — | 40.00 | — | — | ||
| Supply of FRP junction box with loop in loop out arrangement and provision of Kit Kat type fuses water tight & necessary fixing arrangement on pole/wall/ structure with clamps and hardware. As per rly requirement & specification. | — | — | — | 19,080 | |
| — | 40.00 | — | — | ||
| Erection of FRP junction box with loop in loop out arrangement and provision of Kit Kat type fuses water tight & necessary fixing arrangement on pole/wall/ structure with clamps and hardware. As per rly requirement & specification. | — | — | — | 2,120 | |
| — | 48.00 | — | — | ||
| Unskilled Worker for working in Depot / Office / Site as per rly requirement. [4 Nos x 12 Months = 48 Months] | — | — | — | 11,59,200 | |
| — | 8000.00 | — | — | ||
| "Supply - 4 core 300 sqmm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 1,28,00,000 | |
| "Erection - 4 core 300 / 240 sqmm Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per specification no. CBLT/ AL. As per ISS and Rly Specification." | — | — | — | 11,16,000 | |
| — | 6000.00 | — | — | ||
| "Supply - 4 core 185 sqmm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 60,90,000 | |
| — | 9000.00 | — | — | ||
| "Erection - 4 core 185 sqmm Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per specification no. CBLT/ AL. As per ISS and Rly Specification." | — | — | — | 6,12,000 | |
| — | 5000.00 | — | — | ||
| "Supply - 4 core 120 sq.mm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " "Supply - 4 core 120 sq.mm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 35,65,000 | |
| — | 7000.00 | — | — | ||
| "Erection - 4 core 120 sq.mm Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per specification no. CBLT/ AL. As per ISS and Rly Specification." | — | — | — | 3,29,000 | |
| — | 4000.00 | — | — | ||
| "Supply - 4 core 70 sq.mm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 19,52,000 | |
| — | 3000.00 | — | — | ||
| "Supply - 4 core 50 sq.mm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 10,50,000 | |
| — | 9000.00 | — | — | ||
| "Erection - 4 core 70 / 50 sq.mm Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per specification no. CBLT/ AL. As per ISS and Rly Specification." | — | — | — | 2,88,000 | |
| — | 5000.00 | — | — | ||
| "Supply - 4 core 25 sqmm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 10,95,000 | |
| — | 7000.00 | — | — | ||
| "Erection - 4 core 25 sqmm Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per specification no. CBLT/ AL. As per ISS and Rly Specification." | — | — | — | 1,82,000 | |
| — | 4000.00 | — | — | ||
| "Supply - 4 core 16 sqmm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 6,68,000 | |
| — | 6000.00 | — | — | ||
| "Erection - 4 core 16 sqmm Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per specification no. CBLT/ AL. As per ISS and Rly Specification." | — | — | — | 1,56,000 | |
| — | 60.00 | — | — | ||
| Supply of Heat shrinkable straight through jointing type cable kit for 3/3.5/4 core x 16 - 300 sq. mm cable. | — | — | — | 1,21,320 | |
| — | 60.00 | — | — | ||
| Erection of Heat shrinkable straight through jointing type cable kit for 3/3.5/4 core x 16 - 300 sq. mm cable. | — | — | — | 15,540 | |
| Excavation & Resurfacing of cable trench of size 450 mm wide and 1000 mm deep in soil & refilling trench with sand pebbles etc., after laying of cable complete. As per Rly requirement. (IS 1255) Excavation & Resurfacing of cable trench of size 450 mm wide and 1000 mm deep in soil & refilling trench with sand pebbles etc., after laying of cable complete. As per Rly requirement. (IS 1255) | — | — | — | 51,90,000 | |
| — | 5000.00 | — | — | ||
| Breaking of PCC / Asphalt road for making cable trench of suitable depth as per site requirement and refilling / resurfacing the same and reconstructing the Asphalt road / PCC as in original condition after laying of cable complete. As per Rly requirement. | — | — | — | 2,14,50,000 | |
| — | 5000.00 | — | — | ||
| Supply of 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete, with coupling for laying of HT/LT Cable as per Railway requirement | — | — | — | 20,35,000 | |
| — | 5000.00 | — | — | ||
| Laying of 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete, with coupling for laying of HT/LT Cable as per Railway requirement | — | — | — | 2,30,000 | |
| — | 6000.00 | — | — | ||
| Supplying 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. | — | — | — | 7,20,000 | |
| — | 6000.00 | — | — | ||
| Laying 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. | — | — | — | 78,000 | |
| — | 7000.00 | — | — | ||
| Supply of RCC warning cover size 450mm x 180mm x 40mm | — | — | — | 4,55,000 | |
| — | 7000.00 | — | — | ||
| Erection of RCC warning cover size 450mm x 180mm x 40mm | — | — | — | 77,000 | |
| — | 1000.00 | — | — | ||
| Supply of RCC pipe 2 meter long, 150 mm diameter with collar at one end | — | — | — | 4,67,000 | |
| — | 1000.00 | — | — | ||
| Laying of RCC pipe 2 meter long, 150 mm diameter with collar at one end | — | — | — | 52,000 | |
| Supply of RCC 1/2 round pipe 1 meter long, 150 mm diameter | — | — | — | 62,55,000 | |
| Laying of RCC 1/2 round pipe 1 meter long, 150 mm diameter | — | — | — | 7,05,000 | |
| — | 80.00 | — | — | ||
| Supply of 75 mm dia GI pipe class B | — | — | — | 51,840 | |
| — | 80.00 | — | — | ||
| Erection of 75 mm dia GI pipe class B | — | — | — | 2,560 | |
| — | 100.00 | — | — | ||
| Supplying GI pipe 100mm dia. 'B' class at position with accessories complete as per specification no. CW-PLB/GP. | — | — | — | 1,29,600 | |
| — | 100.00 | — | — | ||
| Erecting GI pipe 100mm dia. 'B' class at position with accessories complete as per specification no. CW-PLB/GP. | — | — | — | 14,400 | |
| — | 300.00 | — | — | ||
| Supply of HT / LT cable route marker | — | — | — | 90,000 | |
| — | 300.00 | — | — | ||
| Erection of HT / LT cable route marker | — | — | — | 3,300 | |
| — | 120.00 | — | — | ||
| Supply of Wooden Cleats | — | — | — | 41,160 | |
| — | 120.00 | — | — | ||
| Erection of Wooden Cleats | — | — | — | 2,040 | |
| — | 40.00 | — | — | ||
| Brick masonry work in cement mortar 1:6 for construction of Manhole of size 1m x 1m x1m including plastering for cable jointing/ terminating & maintenance. | — | — | — | 3,66,960 | |
| — | 40.00 | — | — | ||
| Supply of CI Manhole cover of size 18" x 36" (2 nos for 1 manhole of 100kg each.) | — | — | — | 3,41,000 | |
| — | 40.00 | — | — | ||
| Erection of CI Manhole cover of size 18" x 36" (2 nos for 1 manhole of 100kg each.) | — | — | — | 17,960 | |
| — | 2200.00 | — | — | ||
| Supply of 200 mm OD, PE 80, PN 6, HDPE Pipe. Laying of pipes by microtunneling in bores using computer guided machine with suitable couplers and all accesories. Inclusive of laying of Electric cables in HDPE pipes. Cost of all materials, labour, hiring charges of tools, plants, machineries etc. transportations, are to be borne by the contractor. (Work to be started after obtaining permission from this office, No of bores and length of bores as per Rly requirement). Cable will be supplied by rly from KYN / JNJ Stores. | — | — | — | 6,16,06,600 | |
| — | 70.00 | — | — | ||
| Core cutting at Slab area dia 50 - 200 mm | — | — | — | 74,270 | |
| — | 200.00 | — | — | ||
| Supply of maintenance free earthing using copper coated steel rods compression coupler as per RDSO specification No. RDSO/PE/SPEC/PS/0109-2008 (Rev-"0") or latest, with approved enhancing compound and exothermic welding | — | — | — | 13,86,200 | |
| — | 200.00 | — | — | ||
| Erection, testing and commissioning of maintenance free earthing using copper coated steel rods compression coupler as per RDSO specification No. RDSO/PE/SPEC/PS/0109-2008 (Rev-"0") or latest, with approved enhancing compound and exothermic welding | — | — | — | 3,86,400 | |
| — | 60.00 | — | — | ||
| Supply of earthing G.I. PIPE with cement concrete earth chamber, charcol, salt etc. | — | — | — | 84,420 | |
| — | 60.00 | — | — | ||
| Erection of earthing G.I. PIPE with cement concrete earth chamber, charcol, salt etc. | — | — | — | 9,360 | |
| — | 3000.00 | — | — | ||
| Supply of 25mmx 3mm G.I. earth strip for connecting earth station to controlling boards | — | — | — | 4,53,000 | |
| — | 3000.00 | — | — | ||
| Laying & connecting 25mmx 3mm G.I. earth strip for connecting earth station to controlling boards | — | — | — | 78,000 | |
| — | 4000.00 | — | — | ||
| Supply of 8 SWG GI Wire and connecting to various earth points. | — | — | — | 20,000 | |
| — | 4000.00 | — | — | ||
| Laying & Connecting of 8 SWG GI Wire and connecting to various earth points. | — | — | — | 8,000 | |
| — | 300.00 | — | — | ||
| Supply of 25 mm x 3 copper strip for earthing. | — | — | — | 37,800 | |
| — | 300.00 | — | — | ||
| Laying & connecting 25 mm x 3 copper strip for earthing. | — | — | — | 11,700 | |
| — | 15.00 | — | — | ||
| Supply of material of Copper plate earthing 600mm x 600mm x 6 mm for neutral as per IS-3044 | — | — | — | 1,32,795 | |
| — | 15.00 | — | — | ||
| Installation, testing & commissioning of Copper plate earthing 600mm x 600mm x 6 mm for neutral as per IS-3045 | — | — | — | 14,760 | |
| — | 10.00 | — | — | ||
| Supply of 3 phase, 22/0.4kv, 100 KVA transformer oil cooled, O/D type, with all accessories as per IS 1180 (PART 1): 2014 Energy Efficient level 3 or above | — | — | — | 28,48,820 | |
| — | 10.00 | — | — | ||
| Erection, testing & commissioning of 3 phase, 22/0.4kv, 100 KVA transformer oil cooled, O/D type, with all accessories as per IS 1180 (PART 1): 2014 Energy Efficient level 3 or above | — | — | — | 3,16,530 | |
| — | 15.00 | — | — | ||
| Supply of distribution box with MCCBs suitable for 100 - 500 KVA transformer as per MSEDCL specification. | — | — | — | 4,57,230 | |
| — | 15.00 | — | — | ||
| Erection of distribution box with MCCBs suitable for 100 - 500 KVA transformer as per MSEDCL specification. | — | — | — | 22,875 | |
| — | 5.00 | — | — | ||
| Supply of 3 phase, 22/0.4kv, 315 KVA transformer oil cooled, O/D type, with all accessories as per IS 1180 (PART 1): 2014 Energy Efficient level 3 or above | — | — | — | 33,72,215 | |
| — | 5.00 | — | — | ||
| Erection, testing & commissioning of 3 phase, 22/0.4kv, 315 KVA transformer oil cooled, O/D type, with all accessories as per IS 1180 (PART 1): 2014 Energy Efficient level 3 or above | — | — | — | 3,74,695 | |
| — | 15.00 | — | — | ||
| Supplying, of 22kV SF6, Motorized, SCADA Compatible RMU 2 Iso + 1 Br as per MSEDCL Specifications, Drawings & Requirement. | — | — | — | 84,23,700 | |
| — | 15.00 | — | — | ||
| Installing, testing and commissioning of 22kV SF6, Motorized, SCADA Compatible RMU 2 Iso + 1Br as per MSEDCL Specifications, Drawings & Requirement. | — | — | — | 9,35,970 | |
| — | 5.00 | — | — | ||
| Supplying adittional extendable/non-extendable indoor type 11/22 kV, 630A, load b r e a k e r switch, compliant to IEC 62271 -100, 200 and 102, on provided MS channels/trench/foundations per specification no. SW-HTS/ LBS on RMU | — | — | — | 7,67,450 | |
| — | 5.00 | — | — | ||
| Installation, testing and commissioning adittional extendable/non-extendable indoor type 11/22 kV, 630A, load breaker switch, compliant to IEC 62271 -100, 200 and 102, on provided MS channels/trench/foundations per specification no. SW-HTS/ LBS on RMU | — | — | — | 85,270 | |
| — | 10.00 | — | — | ||
| Supplying additional outdoor type 11/22 kV 630A, load break isolator switch FOR mu , compliant to IEC 62271-100, 200 and 102,on provided MS channels/trench/foundation as per specification no. SWHTS/LBS. | — | — | — | 16,15,840 | |
| — | 10.00 | — | — | ||
| Installation, testing and commissioning additional outdoor type 11/22 kV 630A, load break isolator switch FOR mu , compliant to IEC 62271-100, 200 and 102, on provided MS channels/trench/foundation as per specification no. SWHTS/LBS. | — | — | — | 1,79,530 | |
| — | 30.00 | — | — | ||
| Foundation structure for RMU for cable entry, etc. | — | — | — | 6,78,270 | |
| — | 20.00 | — | — | ||
| Supply of 22kV 3 phase AB switch 200A cap. alongwith GOD operating switch assembly inclusive insulator & flexible jumper | — | — | — | 3,24,260 | |
| — | 20.00 | — | — | ||
| Erection of 22kV 3 phase AB switch 200A cap. alongwith GOD operating switch assembly inclusive insulator & flexible jumper | — | — | — | 32,420 | |
| — | 20.00 | — | — | ||
| Supply of 22kV 3 ph. H.G. (D.O) fuse assembly complete inclusive insulator flexible jumpers. | — | — | — | 98,360 | |
| — | 20.00 | — | — | ||
| Erection of 22kV 3 ph. H.G. (D.O) fuse assembly complete inclusive insulator flexible jumpers. | — | — | — | 4,920 | |
| — | 100.00 | — | — | ||
| Supply of 22kV pin insulator including pin and nut bolt, check nuts etc. | — | — | — | 42,700 | |
| — | 100.00 | — | — | ||
| Erection of 22kV pin insulator including pin and nut bolt, check nuts etc. | — | — | — | 4,300 | |
| — | 3000.00 | — | — | ||
| Supplying of XLPE insulated galvanised steel formed wire armoured (strip) cable 22 kV(E), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB- HT, confirming to IS:7098(pt-II) 2011 or latest. | — | — | — | 56,64,000 | |
| Supply of 22 kV Grade HT 3 Core X 300 Sq.mm, Alluminium XLPE insulated extruded PVC sheathed, armoured with galvanized steel round wire armoured extruded PVC outer sheathed cable confirming to IS:7098(pt-II) 2011 or latest | — | — | — | 6,32,80,000 | |
| Erection, Transportation & laying of 22/33kV grade 300 / 240 / 95 sqmm, 3 Core, XLPE cable as per ISS:7089 (Cable shall be supplied by Rly. at Store Depot, Kalyan/Juinagar). | — | — | — | 34,65,000 | |
| — | 40.00 | — | — | ||
| Supply of Indoor Touch Proof cable end termination for 22 kv, 3 core, 300 Sq.mm, XLPE cable | — | — | — | 8,86,080 | |
| — | 40.00 | — | — | ||
| Erection of Indoor Touch Proof cable end termination for 22 kv, 3 core, 300 Sq.mm, XLPE cable | — | — | — | 1,32,920 | |
| — | 60.00 | — | — | ||
| Supply of heat shrinkable straight through joints suitable for 22/33 KV grade 3 X 240/300 sq mm Aluminium conductor cable XLPE. | — | — | — | 28,03,500 | |
| — | 60.00 | — | — | ||
| Making and commissioning of heat shrinkable straight through joints suitable for 22/33 KV grade 3 X 240/300 sq mm Aluminium conductor cable XLPE. | — | — | — | 6,120 | |
| — | 2.00 | — | — | ||
| Transportation of tools & plants, man, materials at site as per Railways requirement. | — | — | — | 13,79,808 | |
| — | 70.00 | — | — | ||
| Supply of end termination indoor/outdoor type 22/33kV grade 300 sqmm/240 sqmm, 3 Core XLPE cable as per relevant ISS. | — | — | — | 10,64,560 | |
| — | 70.00 | — | — | ||
| Erection of end termination indoor/outdoor type 22/33kV grade 300 sqmm/240 sqmm, 3 Core XLPE cable as per relevant ISS. | — | — | — | 57,750 | |
| — | 4.00 | — | — | ||
| Supply of 500 KVA 2.2KV / 433 V Transformer. | — | — | — | 58,40,960 | |
| — | 4.00 | — | — | ||
| Installation, testing and commissioning of 500 KVA 2.2KV / 433 V Transformer. | — | — | — | 3,54,896 | |
| — | 4000.00 | — | — | ||
| Supply - 3 core 185 sq.mm, Al conductor, Armoured, XLPE Cable, 6.6 KV grade as per IS 7098 (Part 1) | — | — | — | 56,16,000 | |
| — | 6000.00 | — | — | ||
| "Erection - 3 core 185 sqmm, 6.6 kv cable Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per ISS and Rly Specification." | — | — | — | 4,08,000 | |
| — | 3000.00 | — | — | ||
| Supply of 11 KV (E) XLPE HT cable standard compact circular Alumn. Conductor XLPE insulated screened with extruded semi conducting compound in combination with copper tape inner sheathed of PVC sheathed cable suitable for 11000 V grade conforming to IS:7098 (Pt.-II) 1985 with latest amdt. Of size 3 Core X 240/300 Sq.mm, | — | — | — | 53,73,000 | |
| — | 6000.00 | — | — | ||
| "Erection - 3 core 240/300 sqmm, 11 kv cable Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per ISS and Rly Specification." | — | — | — | 5,10,000 | |
| — | 10.00 | — | — | ||
| Supply of heat shrnkable straight through joint suitable for 6.6 / 11 kV Grade, 3X185 / 240 / 300 sq.mm AL conductor, XLPE Cable. | — | — | — | 2,12,060 | |
| — | 10.00 | — | — | ||
| Erection & Commissioning of heat shrnkable straight through joint suitable for 6.6 / 11 kV Grade, 3X185 / 240 / 300 sq.mm AL conductor, XLPE Cable. | — | — | — | 9,420 | |
| — | 10.00 | — | — | ||
| Supply of heat shrnkable end termination outdoor/indoor suitable for 6.6 kV Grade, 3X185 sq.mm AL conductor, XLPE Cable. | — | — | — | 41,650 | |
| — | 10.00 | — | — | ||
| Erection & Commissioning of heat shrnkable end termination outdoor/indoor suitable for 6.6 kV Grade, 3X185 sq.mm AL conductor, XLPE Cable. | — | — | — | 4,440 | |
| — | 10.00 | — | — | ||
| Supply of indoor/outdoor type heat shrinkable end termination cable joint kit 11 KV HT AL 3 core 240 / 300 sq.mm cable. | — | — | — | 94,240 | |
| — | 10.00 | — | — | ||
| Erection, testing & commissioning of indoor/outdoor type heat shrinkable end termination cable joint kit 11 KV HT AL 3 core 240 / 300 sq.mm cable. | — | — | — | 4,700 | |
| — | 4.00 | — | — | ||
| Supplying 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. | — | — | — | 32,192 | |
| — | 4.00 | — | — | ||
| Erecting 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. | — | — | — | 3,576 | |
| — | 4.00 | — | — | ||
| Supplying 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm. | — | — | — | 20,208 | |
| — | 4.00 | — | — | ||
| Erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm. | — | — | — | 2,244 | |
| — | 4.00 | — | — | ||
| Supply of lightening arrestors 11kV HT supply with mounting arrangement as per the MSEB's / BEST specn. | — | — | — | 23,720 | |
| — | 4.00 | — | — | ||
| Erection of lightening arrestors 11kV HT supply with mounting arrangement as per the MSEB's / BEST specn. | — | — | — | 1,192 | |
| — | 80.00 | — | — | ||
| Supply of 11kV, 45 KN Disc insulators to form strings for 22kV line anchoring. | — | — | — | 64,720 | |
| — | 80.00 | — | — | ||
| Erection of 11kV, 45 KN Disc insulators to form strings for 22kV line anchoring. | — | — | — | 6,480 | |
| — | 80.00 | — | — | ||
| Supply of Strain hardware for ACSR DOG conductor. | — | — | — | 31,040 | |
| — | 80.00 | — | — | ||
| Erection of Strain hardware for ACSR DOG conductor. | — | — | — | 3,120 | |
| — | 80.00 | — | — | ||
| Supply of HT Stay sets with turn buckle, anchor plate etc. | — | — | — | 56,000 | |
| — | 80.00 | — | — | ||
| Erection of HT Stay sets with turn buckle, anchor plate etc. | — | — | — | 5,600 | |
| — | 4.00 | — | — | ||
| Supply of ACSR DOG conductor. | — | — | — | 2,95,348 | |
| — | 4.00 | — | — | ||
| Stringing of ACSR DOG conductor. | — | — | — | 14,768 | |
| — | 500.00 | — | — | ||
| Supply, spreading of Sand | — | — | — | 1,72,500 | |
| — | 8.00 | — | — | ||
| Supply of M.S. structures (RSJ poles) as per MSEDCL specifications | — | — | — | 4,18,416 | |
| — | 8.00 | — | — | ||
| Erection, testing commissioning of M.S. structures (RSJ poles) as per MSEDCL specifications | — | — | — | 41,848 | |
| — | 100.00 | — | — | ||
| Supply of materials and preparation of foundation / muffing for poles with C.C. mixture of 1:3:6 ratio | — | — | — | 2,52,400 | |
| — | 50.00 | — | — | ||
| Supply of anticlimbing device | — | — | — | 36,250 | |
| — | 50.00 | — | — | ||
| Erection of anticlimbing device | — | — | — | 5,550 | |
| — | 100.00 | — | — | ||
| Supply of danger board inlcuding fixing arrangement & necessary hardware. | — | — | — | 50,200 | |
| — | 100.00 | — | — | ||
| Erection of danger board inlcuding fixing arrangement & necessary hardware. | — | — | — | 11,100 | |
| — | 4000.00 | — | — | ||
| Supply, fabrication of G.I. Flat of various sizes. | — | — | — | 3,20,000 | |
| — | 4000.00 | — | — | ||
| Erection of G.I. Flat of various sizes. | — | — | — | 32,000 | |
| — | 60.00 | — | — | ||
| Hiring of cable fault locator for detecting of LT & HT cable fault in existing cables of various sizes & voltage grades | — | — | — | 6,47,520 | |
| — | 10.00 | — | — | ||
| Supply, painting of Red Oxide paint | — | — | — | 690 | |
| — | 10.00 | — | — | ||
| Supply, painting of Aluminium paint | — | — | — | 1,200 | |
| — | 15.00 | — | — | ||
| Shifting of existing High Mast complete with luminaires, including disconnection and dismantling of the existing 25-metre-long mast, transportation to the new location, casting of foundation, re-erection, testing, and commissioning of the same with all required accessories as per site requirements. In case of any damage to the High Mast during shifting, the same shall be repaired and restored to original condition by the contractor at no extra cost, complete in all respects. | — | — | — | 23,23,080 | |
| — | 3.00 | — | — | ||
| Computer with preloaded licensed essential software including necessary interfacing equipment for diagnostics | — | — | — | 4,31,946 | |
| — | 6.00 | — | — | ||
| Space Planners Movable File Storage System ( Compactor ) 5-Bay Mechanized Drive Type as per specification attached. | — | — | — | 44,66,352 | |
| — | 30.00 | — | — | ||
| Dismantling / cutting, loading, transporting to Hazibunder (Scrap Depot) of Towers, Poles, MS Structures (scrapped steel) or handing over to open line. | — | — | — | 3,12,690 | |
| — | 6000.00 | — | — | ||
| Removal of OH line conductors (in meters - 1 No. of conductor) | — | — | — | 30,000 | |
| — | 8000.00 | — | — | ||
| Dismantling the existing cables of all types & size up to 10 sq mm. | — | — | — | 1,60,000 | |
| Dismantling the existing cables of all types & size above 10 sq mm up to 50 sq.mm. | — | — | — | 4,80,000 | |
| Dismantling the existing cables of all types & size above 50 sq mm. | — | — | — | 10,00,000 | |
| — | 3.00 | — | — | ||
| Providing MS Shed 10 x 10 x 11 feet | — | — | — | 11,55,000 | |
| — | 8.00 | — | — | ||
| Dismantling of existing transformer and transporting to Scrap depot / Handing over to Open Line Depot along with all accesories. | — | — | — | 17,992 | |
| — | 20.00 | — | — | ||
| Dismantling, Disconnecting, Removal of existing LT Boards and Transportation, Erection, Testing & Commissioning of the same with required cable gland & lugs as per site requirement. | — | — | — | 2,99,200 | |
| — | 10.00 | — | — | ||
| Dismantling, Disconnecting of existing LT / HT Feeder Pillar, LT / HT Panel and Transportation, Erection, Testing & Commissioning of the same with required cable gland & lugs as per site requirement. | — | — | — | 2,75,000 | |
| — | 35.00 | — | — | ||
| Inspection fee / fee for obtaining approval of esimate from ENERGY BOARD /PWD for HT/LT Crossing | — | — | — | 12,54,680 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .