GE/863/EWS-T-26 of 2020-21

Amount

Demolition and breaking up drain pipes (Salt glazed ware,) 110 mm dia set incement mortar complete all as specified and directed.

Demolition Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar or cement complete all as specified and directed.

Demolition of Reinforced Concrete of any description including cutting of reinforcement bars to faciliate demolition complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dens soil complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Excavating in post holes in hard/dense soil (or similar holes) each n exc 0.5cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M &L for PCC 1:4:8 type D-2 using 40 mm graded stone aggragate as in Cement concrete in foundations, filling and mass concrete complete all as specified and directed.

M&L Pre-cast cement concrete block masonry 1:3:6 type C1 with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete complete all as specified and directed.

M&L for walling of random rubble stone masonry uncourced well bonded bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M/L precast PCC 1:3:6 type C1 using 20mm graded stone agg as bonder stones set in cement mortar 1:6 complete all as specified and directed.

M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for plain cement concrete M-20 Nominal mix (1:2:4) (using 20 mm graded stone aggregate) Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like as required complete all as specified and directed.

M & L for providing reinforced cement concrete (1:2:4) (using 20 mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 complete all as specified and directed.

M & L for Mild stee TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for Mild stee TMT bars 6 to 8 mm dia , and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Rendering 15 mm thickin CM 1:4 on fair faces of brick work or concrete surfaces even and smooth using water proofing compound (WPC) without using extra lime or cement complete all as specified and directed.

Rendering 15mm thick cement plaster in CM 1:4 on concrete surface finished even and smooth complete all as specified and directed.

M & L for two coats of cement base paint including preparation of new plastered surfaces on walls complete all as specified and directed.

S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beam, tee, angle, channel or flat sections) of FE 410-W (Gde-E-250) quality A, including distance places, cleats etc complete all as specified and directed.

S&F painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Preparation of iron new surface and applying two coat of synthetic enamel paint ovar a coat of red oxide complete all as specified and directed.

M & L for 110 mm PVC (SWR) pipes singlesocketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in bed to drain pipebof 110 mm bore pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm dia pipe complete all as specified and directed.

M&L for Gully trap Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P'of size 180 x 100 mm for drain pipe complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) bends with access door any radius complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm bore vent cowl complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

S&F powder coated Anodised aluminium frame for partion,doors, windows, ventilators with one or more rebates including joining cleat,glazing clips,rubber neoprene packing for fixing etc. complete all as specified and directed.

S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F 5.5 mm Sheet glass, ordinary quality and glazing with oil putty or beading in square exc 0.5 sq. m in each pane complete all as specified and directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified (Make of cable: Kalinga/Havells/Anchor) for One light point / Fan/ bell point controlled by one switch complete all as specified and directed.

One light point / Fan/ bell point controlled by one switch complete all as specified and directed.

One socket 3 Pin 5A pin socket oulet 5Amps on same board with cables 1.5 Sqmm size complete all as specified and directed.

One socket 3 Pin 5A pin socket oulet 5Amps on indepndent board with cables 1.5 Sqmm size complete all as specified and directed.

One socket 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 4 Sqmm size complete all as specified and directed.

S&F switch piano flush type single pole one way 5/6 Amps complete all as specified and directed.

S&F lamp holder Angle / batton type insulated body with back plate and to be fixed on PVC bock. Including dismantling old one complete all as specified and directed.

S&F socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one complete all as specified and directed.

S&F of switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge including dismantling old one complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type including old one complete all as specified and directed.

S&F ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one complete all as specified and directed.

S&F LED integrated batten tube light fittings 20W 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specified and directed. Cat Part No:LTTB4F20WLED/W of C&S or equivalent approved makes given in Appendix 'B' of tender documents.

M&L DB SPN sheet metal enclosure single door suitable for mounting MCB 240 Volts with busbar 6 way including dismantling old one complete all as specified and directed.

S&F MCB SPN 230 Volts 40 Amps complete all as specified and directed.

S&F MCB SP 230 Volts 6- 32 Amps complete all as specified and directed.

S&F LED lamp 9W system lumen (NOM) 600 with all accessories complete all as specified and directed. Cat part No:- LSW-9W-CDL-BC of CG or equivalent approved makes given in Appendix 'B' of tender documents.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart incl 4 mm suspension wire, one twin core cable flat of size 10 Sqmm complete all as specified and directed.

M & L for House service bracket (hook type) complete with 3.0 mtr long G.I pipe 40mm dia Med grade, two nos 90 degree bends, MS hook and stay or guy complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip of size 32 x 6 mm earth continuity coductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel ,GI earth strip protected by GI medium grade pipe 40 mm dia all as shown in electrical plate No. 3 ,connected to earthing test point complete all as specified or indicated including testing on completion or any other equipment with provision of GI pipe light grade etc all as specified and directed including necessary excavation and earth work in hard/dense soil, returning filling, disposal of surplus soil up to 50 M, provision of concrete pit in PCC (1:2:4) type B1 using 20 mm graded stone aggregate with 40 mm thick cover of RCC 1:2:4 using 20 mm graded stone aggregate, reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 40x40x6 mm with 6 mm dia bar handle made to shape duly exposed surface painted with 2 coats of synthetic enamal paint over a coat of primer, necessasry form work, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 meter long placed on top edge of earth plate, common salt and charcoal filling, test point made out of bronze/ gun metal with fixing arrangement, funnel, wire mesh etc. complete all as specified and directed. Note: Earth continuity conductor beyond 7.5 mtr shall be mearured and paid separately.

S&F CFL light fitting, 1 x 9 W Bulk head luminaries with lamp holders, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 v, 50 Hz complete all as specified and directed.

Supply and fixing of LED street light fitting 45 watt made of pressure die cast aluminium housing with light power LED as light source and lense, IP-66 protection with CCT 5700 Lumen and inbuilt surge protection and electric driver and making connection with suitable size cable from HT OH line to fitting including taking down old existing LED street light of any size or any type complete all as specified and directed. Cat Part No LSTP-45-CDL of Crompton Greaves or equivalent approved makes given in Appendix 'B' of tender documents.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 9,300.00

PRITPAL SINGH