PROVISION OF EXHAUST FANS AND DUCTING FOR ST 5000 AT ATS P-20, PROVISION OF HIGH MAST LIGHT NEAR BUILDING NO. P-65, PROVISION OF SECURITY LIGHTS AT PATHWAY BETWEEN ADMIN BLOCK TO IN-LIVING BLOCK, PROVISION OF LIGHT FITTINGS WITH CONNECTED ITEMS FOR A

Amount

SCHEDULE 'A' PART -I(E/M PORTION)

Material and labour for Point wiring complete with FRLS PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit 20mm dia (ISI marked) and accessories, concealed in wall / surface on ceiling with sunken type pressed steel / welded terminal boxes made out of 2mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of FRLS PVC insulated unsheathed 1.5 Sqmm FRLS multistranded with copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following:

(a) One light/fan point controlled by one, one-way switch

Supply and fix Switch Piano, flush type, single pole, one way, 6 Amps, 240 volts, ISI marked complete all as specified and as directed.

Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed.

Material and Labour for sub main wiring with single core 1100 V FRLS grade conforming to IS 694 PVC insulated unsheathed cables two run 6 Sq mm multi stranded copper conductor drawn through and including 25 mm dia non metallic PVC rigid conduit and conduit accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 6 sqmm copper wire earth continuity conductor etc and making good disturbed surfaces to match existing all as specified and directed. Note : Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one run.

S & F heavy duty exhaust fan, metal body, 1400 RPM, 230V, AC, 50 Hz, of size 380mm sweep including suitable louvers of appropriate size complete all as specified and directed by Engineer-in-Charge. Make: Crompton Greaves model- EXHD380-4-3 or equivalent to Usha/Bajaj

M&L for cutting/chasing of wall of any size & depth suitable for fixing of Exhaust fan/duct (0.6x0.6m) and make good disturb surfaces and matching with the existing finishes complete all as specified and directed.

S & F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S & F for duct of 0.6x0.6m with PGI sheet of length upto 6 Mtrs of gauge 18, with can wash Cloth not less than 100mm high including fixing arrangement etc and metergear, thread rod, support angle, nut bolts, hanger box and extra fitting including fabricating and fixing on site as directed all as specified by Engr-in-Charge.

Supply and fix MCB SPN, AC 240 Volts 32 Amps 10 KA, rupturing capacity, 'C' curve complete all as specified and as directed.

Supply and fix MCB SP 240 V, 6A to 32 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed.

Supply and fix in repair Sheet metal enclosures for DBs single pole 4 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement including taking out existing unserviceable DB complete all as specified and as directed.

Supply and fix Energy saving environmental frendly long life aesthetically designed with symmetrical light distrubution spun aluminium with decorative opal polycarbonate diffuser with IP 65 protection LED post top lantern 40 W with suitable for pole dia 76 mm complete all as specified and directed. Make : Bajaj Cat No BGCL 40W LED WH or equivalent Philips/Crompton

Supply, laying and testing LT UG 1100 volts grade PVC /XLPE insulated and sheathed armoured multistranded heavy duty electric power cable with aluminium conductor 2 core 16 Sqmm, laid in trenches/ duct / walls/poles etc. including cable gland on both termination where necessary including laying, connecting to various switches in panel board,etc, testing and commissioning cable etc complete all as specified and directed.

Supply and lay steel tubes, 'medium grade' galvanised, with all fittings of bore of tube 80mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed. all as specified and directed.

M & L for PCC 1:4:8 type D2 with 40 mm Cement concrete in foundations,filling and mass concrete including cutting of existing hard standing all as specified and directed

Excavation in trenches n.exc 1.5 M wide and n. exc 1.5 M depth and getting out in hard/dense soil for cables/poles/pipes complete all specified and as directed.

Returning, filling in incl spreading leveling, watering and well ramming in layers n.exc.25cm thick complete all specified and as directed.

Removing excavated material to a distance n.exc 50 M and depositing where directed at a level n.exc 1.5 M above the starting point complete all specified and as directed.

Supply and spread approved sand in trenches for cable cushioning complete all as specified and directed. Note:- (Punned thickness only will be measured)

Supply and lay burnt bricks of old size sub-class B for cable protection all as directed & as specified.

Supply and lay steel tubes, 'light grade' galvanised, with all fittings; of bore of tube 50mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed. all as specified and directed.

Earthing complete with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized earth Lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No.3 and connected to earth testing point all as specified and directed including testing on completion complete all as specified and as directed by Engr-in-Charge including taking down old complete Earthing system complete all as directed by Engineer-in-Charge. Note No.1: The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 40 mm dia watering pipe, wire mesh, 20mm dia light grade GI protection pipe for earth lead etc., complete

S & F wall mounted LED 20 watts, batton type fitting for surface and pendant application, 230 volts with extruded aluminium housing PC diffuser and integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements and connection from ceiling rose to fitting, complete all as specified and as directed. Make: C & S, Cat No LTTB4F20WLED/W or equivalent Bajaj/Philips

Supply and fix Sheet metal enclosures for DBs SPN 2 way 240 V with neutral bus bar 200 Amps single door type with locking arrangement complete all as specified and as directed.

S & F MCB DP 230 volts suitable for fixing on MCB DB of capacity 6 to 30 Amps, 10KA, 50 Hz, AC, 'C' curve complete all as specified. Make: L&T Cat No BB20060/100/160/200/250/320C or equivalent Legrand/Schneider

Supply, laying and testing LT UG 1100 volts grade PVC /XLPE insulated and sheathed armoured multistranded heavy duty electric power cable with aluminium conductor 2 core 6 Sqmm, laid in trenches/ duct / walls/poles etc. including cable gland on both termination where necessary including laying, connecting to various switches in panel board,etc, testing and commissioning cable etc complete all as specified and directed.

Supply and lay steel tubes, 'light grade' galvanised, with all fittings; of bore of tube 40mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed. all as specified and directed.

Excavation in trenches, in Hard/dense soil, exceedings 1.5 Meters in width and excedings 1.5 Meters upto 3 Meters in depth for laying of electrical cables etc and getting out including forming bottom surface and sides all as specified and as directed at site by Engineer-in Charge.

M&L for providing plain cement concrete in 1:3:6 mix,type C1(using 20mm graded stone aggregate) in coping for poles complete all as specified and as directed at site by Engineer-in Charge.

M&L for providing plain cement concrete in 1:3:6 mix ,type C2 (using 40mm graded stone aggregate) in foundations omplete all as specified and as directed at site by Engineer-in Charge.

Supply and Fix steel tubular swaged pole complete with cast iron base plate finial taper plug bolt nut & screws type 410 SP-31of length 9.0 Mtr including painting with Aluminium paint and marking pole No. on black background and Pole No. on white colour complete as specified and directed.

Supply and Fix junction boxes IP 66 protected made out of poly carbonate material for out door installations of size 255x355x122mm with 100 Amp Aluminium Busbar 4 Pole including incoming, outgoing cable connection arrangements with colour code insulation sleeves all as specified and directed by Engr-in-Charge. Make:- Hensel Cat no KF5000C or equivalent in Sintex/C&S

Supply and fix in repair 40 mm dia light grade GI tube bracket of length 1.5 metre bend to required shape including MS clamp made out of 40 mm x 3 mm MS flat iron and fix on steel tubular poles with necessary GI bolts, nuts and washers - 2 sets for each fittings including taking down the existing GI tube bracket complete set all as specified and directed.

Supply and fixing of PVC insulated unsheathed cables of size 1.5sqmm 2 core multi-stranded Copper conductor wire from street light tojunction box as per complete all as specified and as directed.

Supply and fixing Rigid non metalic PVC conduit, ISI marked medium grade with outer dia of 20mm to be fix along with steel tubular pole with minimum 4 Nos of clamps with nut bolts complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing LT UG 1100 volts grade PVC /XLPE insulated and sheathed armoured multistranded heavy duty electric power cable with aluminium conductor 2 core 10 Sqmm, laid in trenches/ duct / walls/poles etc. including cable gland on both termination where necessary including laying, connecting to various switches in panel board,etc, testing and commissioning cable etc complete all as specified and directed.

M&L for MS work, fabricated from MS channel, angle iron, flat iron of any size with and incl all kind of machine works i.e. welding, cutting, bending, drilling, grinding, polishing etc with and incl all fixing accessories i.e. nuts, bolts, washers, MS fasteners etc as required and two coats of synthetic enamel paint over a coat of red oxide paint, fixing the same on any level of the pole, complete all as directed.

S & F Street light fitting LED type with 45 Watt LED made in pressure die cast aluminium housing with IP 66 protection complete all as specified and directed. Make: C & S, Cat No LTESS45WLED/LS or equivalent in Philips/Bajaj/Crompton

S & F Flood light fitting LED type with 100 Watt LED made in pressure die cast aluminium housing with IP 66 protection complete all as specified and directed . Make: C & S, Cat No LTEF100WHPLED or equivalent in Philips/Bajaj/Crompton

Supply, fixing, install, commissioning and testing complete, Online UPS System 3 Phase, 10 KVA with Output 3 Phase, 380 Volts, 50 Hz, IGBT based pure true online system complete all as specified and directed . Make : Numeric (LEGRAND)/Luminous/Microtek/Sakthi electrical controls

Supply and fix 12V, 75 AH SMF Battery complete all as specified and directed . Note : The quoted rate deemed to inclusive of suitable battery open rack, DC Cables, battery MCB and all necessary accessories.

Material and Labour for sub main wiring with single core 1100 V FRLS grade conforming to IS 694 PVC insulated unsheathed cables four run 10 Sq mm multi stranded copper conductor drawn through and including 32 mm dia non metallic PVC rigid conduit and conduit accessories fixed on walls/roof/floors/ceiling etc with an earth wire of two run 10 sqmm copper wire earth continuity conductor etc and making good disturbed surfaces to match existing all as specified and directed. Note : Six runs of 10 sqmm cable and one run of PVC conduit shall be measured as one run.

Material and Labour for sub main wiring with single core 1100 V FRLS grade conforming to IS 694 PVC insulated unsheathed cables two run 4 Sq mm multi stranded copper conductor drawn through and including 25 mm dia non metallic PVC rigid conduit and conduit accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 4 sqmm copper wire earth continuity conductor etc and making good disturbed surfaces to match existing all as specified and directed. Note : Three runs of 4 sqmm cable and one run of PVC conduit shall be measured as one run.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed conduit wiring, etc., cutting in brick walls and making good and painting matching with existing colour, complete all as specified and as directed by Engineer-in-Charge

S&F TPN 6 way Vertical DB 415 Volt, Metal Double door type IK 09 degree of protection with MCCB as incomer, provided with insulated vertical phase bus-bars, neutral bar/s with shroud/s, earth bar/s, sticking saddles, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identification labels, complete all as specified and as directed by Engineer-in-Charge MAKE : L&T Model No DBVTL006DD or equivalent in Legrand/Indo Asian/Standard

Supply and fix MCCB 4P, 100 Amps 415 braking capacity 30 KA complete all specified and as directed.

Supply and fix MCB SP, AC 240 Volts 32 Amps 10 KA C series complete all specified and as directed.

Supply and fix MCB TPN, AC 240 Volts 32 Amps 10 KA C series complete all specified and as directed.

Supply, installation, testing and commissioning of 12.50 Metre galvanised steel high mast suitable for suitable to install 06 nos LED luminaries in symmetrical arrangement alongwith the following accessories and as per Particular specification :- Make: Bajaj/Philips/Havells/C&S Note:- All light fittings make shall be similar manufacture of high mast pole.

(a) 12.50 Metre mast shaft in two sections suitable for wind speed as per IS 875 two section, section thickness 3 mm, top dia 150mm, bottom dia 340 mm, Base plate thick ness 25mm & dia of 520mm 12 side polygon of mast cross section and 900X250mm opening and door at base, GI single spike of length 1200mm lightning protection, max wind speed 180 Km/Hr- 1 Job

(b)Raising lowering system compressing Integral double drum winch 5mm dia ss wire rope trailing cable connectors , 50:1 Gear ratio SWL 350 Kg flame proof integral motor operation 1.5 HP of motor capacity single speed forward and reversible operation 415 Volts/240 Volts 6 pole single speed with motor or manual operation self lubricant in permanent oil bath of lubricant 90/140 facility of torque limitor with 2X5 mm dia stainless steel rope system and all required standared accessories- 1 Job

(c) Foundation bolts, manufactured from special steel along with nuts, washers, anchor plate and comman template fixed in foundation as per drawing and specifications 6 Nos of TS 600/25mm dia 750mm long foundation bolts 600mm (ID) dia carrage ring complete all as specified and directed-1 set

(d) M & L for shallow foundation for the high mast as per manufacturer specifications with M-30 grade design mix cement concrete using 20 mm graded stone aggregate including neccessary earth work excavation in any type of soil formwork and reinforcement for high mast of adequate size to considering actual safe soil bearing capacity at site and foundation drawings to be submite to Garrison Engineer before commencement the work . - 01 Job

(e) Erection of high mast with the help of suitable tools and plants wiring of luminaries with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor of 2.5 Sqmm lugs - 01 Job.

(f) LED type single doom aviation obstruction light - 1 Nos

(g) lightening arrester spike -1 set

(h) 150 watts LED flood light IP 65 lumanaries plus lamp and its control gear box - 06 Nos

(j) Outdoor Panel fabricated out of 14 G CRCA sheet steel out door type stand mounting dust & varmin proof IP-55 piller with 1 Nos 32 Amps TPN MCB as incomer,single dial timer switch 25 Amp TP contactor for automatic switching of luminaire , power tool control with 2 nos of 9 Amps TP contactor and raise lower push button, incoming 35 Sqmm and out going 16 & 2.5 Sqmm cable entry including earth work and PCC work- 1 Job

Supply, laying and testing LT UG 1100 volts grade PVC /XLPE insulated and sheathed armoured multistranded heavy duty electric power cable with aluminium conductor 3.5 core 35 Sqmm, laid in trenches/ duct / walls/poles etc. including cable gland on both termination where necessary including laying, connecting to various switches in panel board,etc, testing and commissioning cable etc complete all as specified and directed.

Supply, laying and testing LT UG 1100 volts grade PVC /XLPE insulated and sheathed armoured multistranded heavy duty electric power cable with aluminium conductor 4 core 16 Sqmm, laid in trenches/ duct / walls/poles etc. including cable gland on both termination where necessary including laying, connecting to various switches in panel board,etc, testing and commissioning cable etc complete all as specified and directed.

Supply, laying and testing LT UG 1100 volts grade PVC /XLPE insulated and sheathed armoured multistranded heavy duty electric power cable with aluminium conductor 4 core 6 Sqmm, laid in trenches/ duct / walls/poles etc. including cable gland on both termination where necessary including laying, connecting to various switches in panel board,etc, testing and commissioning cable etc complete all as specified and directed.

Earthing complete with GI earth plate 600mmX600mm x 6 mm thick buried directly in ground/ earth pit not less than 2.25M below ground level with top edge of the plate not less than 1.5M below ground level connected to GI earth strip 32 x 6 mm by means of bolts, nuts and washers of GI earthing strip protected by GI pipe i.e. light grade 20mm dia all as shown in electric plate No.5 of MES SSR Part I connected to earthing test point, testing complete including necessary earth pit PCC 1: 3: 6 chamber and 50mm thick PCC 1 : 2: 4 chamber cover and with 6mm dia mild steel re-enforcement of 10Cm C/L spacing both ways in lieu of CI cover refilling of soil ncluding taking down old complete Earthing system etc complete all as directed by Engineer-in-Charge. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 40 mm dia watering pipe, wire mesh, 20mm dia light grade GI protection pipe for earth plate etc., complete

M/s Shana Constructions