Providing and fixing toughened glass partition, modular work station and other associated civil works at TKDL Facility (Room No. 004), KRC, Ground Floor, CSIR-CLRI, Adyar, Chennai-600020

Amount

Providing and fixing toughened glass partition, modular work station and other associated civil works at TKDL Facility (Room No. 004), KRC, Ground Floor, CSIR-CLRI, Adyar, Chennai-600020

Providing and fixing 12 mm thick frameless toughened glass (Make: M/s. Saint Gobain or M/s. Modiguard (or) equivalent.) partitions and door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & floor spring type fixing arrangement(Make: M/s. Dorma (or) M/s. Ozone (or) equivalent and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel 304 Grade H-Type handle of size 32mm dia &457mm Height, hole to hole 305mm suitable toughened glass door (Make:" Ozone or Dorma or equivalent) along with necessary gasket to Prevent the contact between glass and metal ,supporting washer with raised bevelling on the outer surface,grub screws and other associated accessories all as required to suit site condition in all lead and lift and as directed by the engineer in charge.

Providing and fixing stainless steel 304 grade heavy duty corner patch lock with strike plate arrangement (Make: Ozone or Dorma or equivalent) suitable for Toughened glass Door with three sets of keys,lock should be Manufactured as per euro profile cylinder and strike plate, Dead bolt projection of 15mm (Single throw) and other associated accessories all as required to suit site condition in all lead and lift and as directed by the engineer in charge.Make:Ozone or Dorma its equivalent.

WORK STATION-PARTITION: Providing and fixing full height partition with 2"x1" aluminium channel frame work with both sides covered with 6mm plywood,finished with 0.8mm thickness laminate on both sides of approved shade and brand. Providing and fixing pin boards and marker boards upto 18" from top.

WORK STATION-TABLE: Providing and fixing table of varying size with 19mm thickness plywood for top, sides and front. 8mm thickness plywood to be used for rear side of the storage unit including finishing.All the exposed surfaces wil be laminated 0.8mm thickness laminate of approved shade and brand.Providing and fixing of keyboard tray of M/s. "EBCO"brand with required heavy telescopic channels.

WALL MOUNTING CABINET: Providing and fixing wall over head storage with 19mm thickness plywood for sides,front shutter openable and in between planks 0.8mm thickness plywood to be used for rearside of the storage unit.All the exposed surface will be laminated with 0.8mm thickness laminate of approved shade and brand with pvc edge banding tape of appropriate size.All the inner surfaces will be laminated with 0.8mm thickness offwhite laminate.Rate including cost of necessary hardware like beeding,hinges,magnetic stopper,handles,locks etc. To complete for finished item of work.

M SELVAM