Rathoni LI Scheme

Removing the existing transformer from the plinth / Pole and refixing the standby transformer of following capacity including connections etc., complete for 250 KVA

Replacing old and unserviceable gasket of top cover plate of transformer having following capacity for 250 KVA

Replacing old and unserviceable gasket of bushing for the following Transformer capacity for 250 KVA H.T.

Replacing old and unserviceable gasket of bushing for the following Transformer capacity for 250 KVA L.T.

Replacement the H.T. / L.T. burntout winding coils of distribution transformer including rewinding, varnishing and vaccuming etc.,duly retaining the removed burnt winding coils by the Contractor / Firm for copper coils

Replacing HT Bushings - for distribution Transformer by new one.

Replacing HT Bushings metal parts - for distribution Transformer by new one.

Replacing LT Bushings - for distribution Transformer by new one for 250 KVA

Replacing LT Bushings metal parts - for distribution Transformer by new one for 250 KVA

Drying the repaired transformer with appropriate heat / air for 250 KVA.

Loading and Unloading of transformer from site to Workshop or vice verse for 250 KVA.

Transformer oil tested as per IS-335 - 1972 (per Ltr) for 400 KVA.

Supply of 11 KV Hand gloves

Routine maintenance of transformer in operation covering insulation resistance oil, break down strength. Reconditioning /replacement of silicazel, cleaning of transformer and topping upto oil level if required (extra cost will be paid for oil).

Carryout routine maintenance, servicing and testing of 630A to 3000A HT VCB by cleaning fixed contacts, moving contacts and arcchutes including servicing and putting the VCB in perfect working condition after detting all relay and ON, OFF mechanism etc done with only manufacturing companies / Authorised dealers of respective switch gears

Supply, Transportation, Installation, Testing and Comissioning of 2MP Dome camera 1/2.8'' CMOS progressive sensor, 2.7 to 13mm Motorized lens, min. illumination 0.006 Lux F1.6 (color), 0 Lux B/w, 50dB S/N ratio; 1/8 ~1/32000 shutter speed, Max 30 fps, IR distance - 40Mtr or better, 120 dB or better WDR, triple stream, Protocal : IPv4, TLS, DHCP, IPv6, TCP / IP, HTTP, SMTP, UDP, HTTPS, RTSP / RTP / RTCP,DNS,SNMP, IGMP / Multicast, NTP, QoS, 802.1X, ICMP, ARP; Line crossing, Face Detection, Motion Detecton, People counting, Intrusion, Loitering, SMD, Tampering; local storage : up to 256GB; Alarm IN & Outputs, Audio IN & Out; ONVIF-S, G, T, M; Security: HTTPS, Digest authentication, User account and password protection,TLS1.2 only, Stream encryption, AES128 / Telnet closed, IP Filter, PCI-DSS compliance; IP67,IK10, UL,CE,FCC, NDAA Compliant including 5 yrs warranty to be obtained from the OEM. MAKES: Bosch / Honeywell / Axis / Mobotix. or equivalent as approved by Department.

Carryout routine maintenance, servicing and testing of 630A to 3000A HT VCB by cleaning fixed contacts, moving contacts and arcchutes including servicing and putting the VCB in perfect working condition after detting all relay and ON, OFF mechanism etc done with only manufacturing companies / Authorised dealers of respective switch gears

Fabrication, Assembling of transformer core with CRGO Material sheet (M4 or Better grade) only prime quality material having low loss and good grain properties coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise for 250 KVA and 500 KVA transformer as per ISO design standards

Removing the existing transformer from the plinth / Pole and refixing the standby transformer of following capacity including connections etc., complete for 500 KVA

Replacing old and unserviceable gasket of top cover plate of transformer having following capacity for 500 KVA

Replacing old and unserviceable gasket of bushing for the following Transformer capacity for 500 KVA H.T.

Replacing old and unserviceable gasket of bushing for the following Transformer capacity for 500 KVA L.T.

Replacing LT Bushings - for distribution Transformer by new one for 500 KVA

Replacing LT Bushings metal parts - for distribution Transformer by new one for 500 KVA

Drying the repaired transformer with appropriate heat / air for 500 KVA.

Supply and fixing of tap switch suitable for 500 KVA transformer