SPL REPAIR TO COOK HOUSE BLDG NO P-69 OF 20 SIKH AT BHAGAT LINE AND BOUNDARY WALL AT 9-J (NCC GP HQ) UNDER AGE B/R-III AND AGE E/M-II OF GE (SOUTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed.

M & L brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified & directed.

M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified & directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified & directed.

Demolition of cement concrete of ground floor not exceeding 15 cm in depth in any position nototherwise specifically provided for.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified & directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified & directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & not exceeding 4 Sqn each complete all as specified & directed.

Taking down shutters of any description exceeding 1 sqm & not exceeding 2 sqm each complete all as specified & directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete including 03 Nos SS butt hinges 100mm, 02 Nos aluminium tower bolt 150mm in each door as per direction of Engineer-in-Charge.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In-Charge.

S&F Box type steel windows/ventilator comprised of tubular frame and shutters made out of 1.25mm this MS sheet tube with double side shutters with gauged shutter & glass glazed shutter (wire cloth and glass pane only shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 02 Nos tower bolts 150mm long for each leaf and 10mm square bars grills at spacing as shown on drgwelded to Fl frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks netc as includingtwo coats of synthetic enamel paint over a coat of red oxide primer, 3mm thick glass panes and galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F aluminium anodized powder coated door shutter with frame including joining cleats and fixing accessories such as hinges handle and locking arrangements etc size of ong rail stiles and bottom rail shall be 110x44.5 mm and top & centre rail shall be 85x44.5 mm thickness of aluminium section shall be 18 gauge with 15 micron anedizing top and bottom panel shall be provided with 5.00 mm thick plain sheet glass or 12mm thick PVC sheet best quality including locking arrangement (with mortice lock) including taking down door shutter with chowkat or frame, any size complete all as specified and directed.

S & F Steel ventilators top hung shutter including with box type hinges, steel peg Stay with glazing bar complete all as specified & directed.

Supply and fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples in steel widows including removal of wire cloth from existing steel windows, providing new wire cloth and fixed with screws or rivets and provision of new flat iron beads of size 12x5mm complete all as specified and as directed. Note: Removal of steel window incl refixing in same location where necessary will also included in quoted rate.)

Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame complete all as specified & directed.

Supply & fix 4mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane inclone coat of synthetic enamel paint to oil putty complete all as specified & directed

Supply and fix pressed steel frames for doors /window with one or more rebates including necessary fixing lugs, hinges, lock strike plates, etc profile of frame 105x60mm made out of 1.25mm MS sheets including one shop coat of primer complete all as specified and directed.

Supply and fix pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, etc profile of frame 125x60mm made out of 1.25mm MS sheets including one shop coat of primer complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required and depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick but not exc one brick complete all as specified & directed.

S&F 2nd class H.W panelled shutters 35mm thick (3 panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial as per IS 1003 (part-l) kiln seasoned and chemical pressure treated complete all as specified & directed.

Supply & fix 35mm thick glazed and skeleton shutter (3 Panel) for doors of second class hard wood open rebated and prepared to receive glass, gauge etc with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/gauze etc. sizes of member of shutters as specified in SSR Part-1, clause 8.24 (a) complete all as specified & directed.

Supply & fixing, Mild steel sliding door bolt having 250mm long 16mm dia with and including 1 minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified & directed.

S&F 150mm long extruded aluminium anodised handles fabricated type complete all as specified & directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Material & labour for two coat of synthetic enamel paint on old primed steel surface of any description over 10cm width or girth complete all as specified & directed.

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

S & F 150 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified all as directed

S & F 150 mm Mild steel pressed handles, oval type, stove enamelled black complete all s specified and directed

S& butt hinges 100mm long medium weight cold rolled mild steel and fixed complete all as specified & directed.

S & F 150mm long MS helical spring fixed by welding with MS door frame complete all as specified & directed.

S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.

M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primercomplete all as specified & directed.

M&L preparation of old painted wooden surfaces of any description, not other wise described over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified & directed

M & L PCC(1:2:4) Type B-1 using 12.5mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

M&L Non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match over & including 15 mm thick screed bed in cm 1:6 complete all as specified & directed.

All as per item No 37.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified & directed.

M&L Non skid ceramic coloured tiles superior quality size exceeding 0.18 Sqm but not exceeding 0.38 Sqm, 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over & including 10mm thick screed in CM 1:4 complete all as specified and directed.

All as per item No 40.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified & directed.

M&L for mild steel framed work with hollow rectangular section (Weight to be measured at site per Rm) as in framework for chajja / sun shade etc at any height incl all necessary welding and fixed to wall by fastener and rawl plug complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified & directed.

M&L rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified & directed.

M&L chipping, removing carefully concrete surfaces by low impact hammer/breaker without damaging the structure incl preparation of old surfaces of renforcement bars as per manufacturer's instruction and disposal of debris out side MOD land and applying anticorrosive protective coating for steel reinforcement surfaces and applying epoxy bond coat of Make FOSROC (NITOBOND-EP) OR EPOXY BONDING AGENT of Drt Fixit or equivalent of M/s Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new mortar by brush application and building up the profile of structural members by using polymer modified mortar (Molith-PPM) or Polymer mortar HB of Dr fixit upto 20mm thickness including levelling profiling etc complete all as specified and directed.

Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

M&L preparation of old surface after complete removal of existing treatment by mechanical means and applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

M& L preparing plastered new surfaces of ceiling and applying 2mm thick wall care putty and two coats of oil emulsion distemper on ceiling surface complete all as specified & directed.

All as item No. 53.00 here-in-before but one coat on old ceiling surface.

M & L preparation of new plastered surface of wall and applying two coats of exterior emulson paint (weather proof) using using roller over and including applying 2mm thick putty after finishing the wall surfaces complte all as specified and directed.

M&L applying two coats of exterior emulson paint on old surface (weather proof) using roller over and including applying 2mm thick putty after scraping surface by mechanical means and finishing the wall surfaces complte all as specified and directed.

Demolition of reinforced cement concrete (RCC) of any description & in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M & L Mild steel TMT bars 8 to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

M & L RCC (1:2:4) (nominal mix) Type B-1 using 20mm Slabs supported on walls, beams and Cum columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including formwork complete all as specified & directed.

S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

Supply and fixed in repair of PVC low level flushing cistern 10 litre capacity valveless syphonic action type white i as approved incl ball valve/float valve and handle and 32 mm dia flush pipe complete all as specified & directed.

S&F vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste but incluing brackets, CP waste couping, PVC Waste pipe 32mm dia etc complete all as specified and directed.

Supply & fix in repairs 75 mm bore PVC (SWR) pipe in any length fixed to walls with clamps bends and laid in floors etc. complete all as specified and directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix PVC bends/Tee 110mm bore, any radius complete all as specified & directed.

S&F stainless steel plate rack of size 750 x 450 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one complete all as specified & directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wasters incl bedding in cement mortar to dwarf walls or incl fixing cantilever brackets and connecting union to pipe over all size (915mmx460mm bowl size 410x330x160mm) complete all as specified and directed.

S&F three layered 1000 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks & removing complete all as specified & directed.

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair) complete all as specified & directed.

S&F in repair bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repair 15 mm dia stop cock/Concealed stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron complete all as specified & directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified & directed.

Supply and fix glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed.

Supply & fix in repair PVC connections of 600 mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified & directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified & directed.

All as per Item No.77.00 here-in-before but 20 mm bore pipe.

S&F GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified & directed.

All as item No. 79.00 here-in-before but 20 mm bore pipe.

Supply and fixing for 25 mm dia stainless steel curtain rods of approved finish of superior quality fancy type knobs at both ends fancy type brackets complete all as specified & directed.

Taking down old existing water proofing treatment any type from the top of RCC/ arch slab, including PCC padding or plaster, tiles, mud etc, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material and Labour for 20mm thick screed bed in CM 1:4 mixed with WPC @ 200 ml per cement bag of 50 Kgs finised even and smooth without using extra cement on roof surface and wall (WPC will be measured and paid seperately as supply only rate) complete all as specified & directed.

Supply only liquid water proofing compound complete all as specified & directed.

Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including disconnecting existing water tank on roof and refixing in the same position after WPT work).

Material and labour for 16-18mm thick machine cut prepolished Udaipur green slab flooring on cooking platform over 15mm thick screed laid in cement mortar 1:4 screed laid and jointed with grey cement mioxed with pigment to match the shade of slab including moulding to exposed edges of slab complete all as specified and directed.

M&L for 18 to 20 mm thick black granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of eages,complete all as specified and directed.

M & L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing etc complete all as specified & directed.

M & L machine cut kota stone as in riser steps, skirting, daddo and pillar laid over cement 10 mm thick rendering in CM (1:4) and jointed with grey cement slurry mixed with pigment to match including griding and mirror polishing etc complete all as specified & directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified & directed.

M&L Hangers 6 mm dia G I (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasterners 12.5 mm dia 40 mm long complete all as specified & directed.

M&L anodised aluminium snap grid frame work for false ceiling of grid size 605 x 605mm complete all as specified and directed.

M&L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using (40mm graded stone aggregate) as in sub base complete all as specified & directed.

M&L coloured chequered cemtn concrete tiles 30cm x30cm x20mm thick, set, jointed and pointed in neat cement slurry in floors with grey cment and no pigment laid over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling stone slabs or pcc tiles of any description or thickness in steps, landing, flooring and similar work laid, bedded and pointed in cement mortar complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling plain or corrugated steel sheeting any guage, thickness including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L for reinforced Cement Concrete (design mix) M-25 (using 20mm graded crushed stone aggregate) as in beams,bressumers,lintels over 1.50m span ,complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beams hanuchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams etc rough finished flat complete all as specified & directed.

All as per item No 100.00 here-in-above but 5mm dia over and upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L for treatment on new plasterd surface wall on external surfaces by sanding machine or any other mechanical means thereafter washing, rubbing down the surface, in order to remove dust, dirt, loose particles etc and fill the visible cracks/joints with crack seal caulking compound after cleaning the surface by clean water. Applying a coat of primer (water based primer) and allow to dry for six hours. Thereafter apply two coats of exterior grade weather proof acrylic emulsion paint. Complete all as specified and manufactures instruction and directed by Engr-in-charge. Note:- The acrylic paint shall be applied by mechanically airless paint sprayer machine only and throgh applicator.)

S&F MS Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified & directed.

M&L for punched tape concertina coils 1050 mm dia. Complete all as specified and as directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site complete all as specified & directed.

Material & labour for point wiring with FRLS PVC insulated 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, unsheathed copper conductor cable in existing PVC concealed conduit of size 20mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting / chases etc in walls, with 3mm thick plastic laminated sheet cover including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps.

All as item No. 109.00 here-in-before but One ceiling /exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as item No. 109.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as item No. 109.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as item No. 109.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply and fix decorative LED Batten 20 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified & directed.

Supply and fixing lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 10 watt complete all as specified & directed.

Supply and fix decorative LED Batten 10 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified & directed.

Supply & fixing of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified & directed.

Supply and fixing LED luminaire 600 mm x 600 mm,40 watt, 220 V AC recessed type with highefficiency PMMA diffusersoftglare free light completewith driver, holders & LED lamp suitable for roofceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified & directed.

Supply and fix vertical type IP-43-IK09 protection metal door DB 200 Amps rated copper bus bar, pan assembly etc with interlocking links, blanking plates cable ties identification labels TPN 12 way including taking down old unsv DB complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated complete all as specified & directed.

Supply & fixing MCB SPN, AC, 240 volts of 63 Amps, C curve, 10 kA, complete all as specified & directed.

Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA, complete all as specified & directed.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB 3 Pole160Amps 36 KA, 415 volts and 12 Nos MCB's inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 4core armoured, PVC sheathed with aluminium conductor heavy duty complete all as specified & directed.

Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and gating out in soft / loose soil complete all as specified and directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified & directed.

Supply and fixing new exhaust fan steel body AC single phase 230 V of size 300mm sweep with blade , frame and lauvers complete all as specified & directed. Note:- Old unserviceable exhaust fan shall be deposited at MES store yard after taking down.

M&L for Ceiling fan hook made from steel structural, bracing support bend into shape for hanging of ceiling fan complete all as specified & directed.

Supply and fixing new ceiling fans complete with blades, down rods, electronic regulator and ccessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor ( BLDC) complete all as specified & directed. Note:- Old unserviceable exhaust fan shall be deposited at MES store yard after taking down

Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete all as specified & directed.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length.

Material and labour for sub main wiring with 04Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x4 sq mm wire and one 4.0 sq mm earth shall be measured as one unit length.

Supply and fix desert cooler electric driven single phase 230 Volt metallic body (GI) , thickness not less than 1.5mm capacity of water not less than 67 Ltr , 1440 RPM with copper winding and power consumption not more than 240 watt, 50 Hz complete all as specified and directed.

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts complete all as specified & directed.

Supply and fix electric water heater vertical storage type 25 Ltrscapacity having stainless steel steel inner tank with glass enamelled coating BEE 5 star rating ,closed/ ventilated type 240 volt ,glass coated heating element complete with element 2.0 KW and all accessories including fixing arrgement with syitable size of fastner, nuts,bolts and waster etc complete all as specified & directed. Note:- Old unserviceable water heate shall be deposited at MES store yard after taking down.

Supply and fixing Electric Chimneyn 90 CM 1200 cum/hr auto clean covered glass Kitchen Chimney ,filterless technique including motion senser and touch control with duct, Exhaust fan 450 mm and all accessories complete all as specified & directed.

B.K.construction (BID ID -3462112)