SPECIAL REPAIRS TO BK NO 56 AT 6TTR, PONDA

Amount

Dismantling of Single layer Mangalore pattern or similar tiles in roofing portions bedded in lime or cement mortar complete all as specified and directed.

Dismantling of Battens spaced exc 15cm for tiles, shingles etc, of any size including tilting fillets complete all as specified and directed.

Dismantling of timber scantlings 40 sq. cm and over in section, in any position fillets, rails, posts, rafters, purlins, trusses etc in unframed works complete all as specified and directed. (Note:- If flooring tiles of barracks will broken at the time of dismantling of roof contractor will rectify the same and match with previous flooring neat and clean on his own expence. No extra payment will be admissible for the same)

Dismantling of timber fillets under 40 sq. cm in section., in any position fillets, rails, posts, rafters, purlins, etc in framed works. Complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Demolition of brick/stone masonry walls built in cement mortar including all quoins, arches, pillars, retaining walls etc. complete all as specified and directed by Engineer in charge.

M & L for laterite stone masonary of squared ruble, regular coursed well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed by Engineer in charge.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 20mm of squared ruble masonry regular coursed.

M & L rendering 15mm thick in CM 1:6 on fair faces of brick/stone wall or concrete surface finished even and smooth without using extra cement complete all as specified and directed by Engineer- in-charge.

Taking down cement or cement lime plaster in any description including raking out joints, hacking for key, scrubbing down with water etc. including removal of rubbish outside MD land complete all as specified and directed by Engineer in charge.

M & L for 15mm thick plastering in CM 1:4 on external stone or concrete surfaces mixing with & including liquid water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engineer in charge.

M & L for three coat of white wash on new palstered or undecorated surface of wall including preparation of surface complete all as specified and directed by Engineer- in-charge.

M & L for complete removal of existing treatment including preparation surface by washing, rubbing down or on newly plastered surfaces and applying two coat of weather proof acrylic emulsion exterior paint over a coat of weather proof acrylic emulsion exterior primer.

M & L for preparation of old surface of external walls with complete removal of existing treatment and applying 2 coats of cement base paint over a coat of alkali resistant primer and shade match with old painted surfaces complete all as specified and directed by Engineer- in-charge.

M & L for applying two coats of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of new surface or unplastered surfaces of wall with applying 3mm thick wall care putty complete all as specified and directed.

M & L for applying two coats of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of old decorated surfaces including complete removal of existing treatment of wall with applying 3mm thick wall care putty by complete removal of existing treatment complete all as specified and directed.

M & L for applying two coat of white wash on old decorated surfaces of walls and cornices including washing, rubbing, brooming, scrapping down with steel scrapper smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc. complete all as specified and directed.

Dismantling of ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/blankets any thickness, including cover fillets all as complete all as specified and directed by Engineer in charge.

S&F Anodised aluminium snap grid (605mm x 605mm) frame work with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including necessary bolts, nuts and washers for false ceiling complete all as specified and directed by Engineer in charge.

M&L for 6mm thick non asbestos fibre cement building building boards fixed or laid/ inserted to Aluminium framework with screws complete all as specified and directed by Engineer in charge.

M&L for cutting holes in stone walls exc. half brick but not exc one brick built in cement mortar or in cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M& L for dismantling of boarding of any description and fixed in any position with screws and refixing of 6mm thick non asbestos fiber cement building boards fixed or laid/ inserted to aluminium framework with screw including refixing of anodised aluminium snap grid frame work for false ceiling flat or sloping complete all as specified and directed.

M & L for applying two coats of Oil Emulsion Distemper on new or undecorated surfaces of ceiling complete all as specified and directed.

M & L for applying one coat of Oil Emulsion Distemper on old surfaces of ceiling complete all as specified and directed.

Taking down timber roof trussess clear span above 4m & up to 8m, coupled rafters or truss beam complete all as specified and directed.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings stging for water tanks and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde E-250) quality A complete all as specified and directed.

Dismantling of post or struts (RCC) any section inclduing taking out embedded position of concrete and making good disturbed ground or portion complete all as specified and directed by Engineer in charge.

S&F compound girders and stanchions, columns, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, slices etc. built up from two or more beams or channel sections or angles with plates, including all lattice bars and, stiffeners, gusset plates etc. complete all as specified and directed.

M & L cement concrete Type B2, 1:2:4 (using 40mm graded aggregate) in foundation filling and mass concrete in any position complete all as specified and directed by Engineer- in-charge.

S&F for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde E-250) quality A complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of new steel surfaces of not exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F Mild steel flat iron as in hold fast conforming to Fe 290 Gde E-165 complete all as specified and directed by Engineer- in-charge.

Demolition of PCC not Exc 15cm thickness ( below and above ground level ) including floor finishes complete all as specified and directed by Engineer in charge.

M & L for 75mm thick PCC 1:3:6 type C2, using 40mm graded stone aggregate as in plinth protection, surface finished even and fair without using extra cement complete all as specified and directed by Engineer in charge.

M & L for 75mm cement concrete type D2, 1:4:8 using 40mm graded aggregate as in sub base of floor complete all as specified and directed by Engineer in charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer in charge.

M & L for Coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match,including 20mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer in charge.

M & L for coloured glazed ceramic tiles 300mmx200mmx6-7mm set & jointed in neat cement slurry and pointed in neat cement slurry and pointed in coloured cement to match over 10mm thick plastering in CM 1:4 as a backing coat of vertical surface complete all as specified and directed by Engineer in charge.

S & F in repairs Galvanised steel tubing 25 mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engineer- in-charge.

S & F in repairs Galvanised steel tubing 20 mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engineer- in-charge.

S & F in repairs Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed by Engineer- in-charge.

S & F stop valves, cast copper alloy 15 mm bore high pressure with crutch or butter fly handle for iron pipe or for union and complete fixed in repairs complete all as specified and directed by Engineer- in-charge.

All as per item No 44 above but stop cock CP with long shank and cup concealed type complete all as specified and directed by Engineer- in-charge.

S & F stop valves, cast copper alloy 20 mm bore high pressure with crutch or butter fly handle for iron pipe or for union and complete fixed in repairs complete all as specified and directed by Engineer- in-charge.

S & F stop valves, cast copper alloy 25 mm bore high pressure with crutch or butter fly handle for iron pipe or for union and complete fixed in repairs complete all as specified and directed by Engineer- in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc, 1.5 Sqm each (PVC door+Ventilator+window) complete all as specified and directed by Engineer- in-charge.

All as per Sl Item No. 48 here in before but exceeding 1.5 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed by Engineer- in-charge.

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer- in-charge.

M & L for preparation and treating ends of posts, back of chowkats etc area (with tar or coal tar black paint) of tarred exc 0.10 Sqm but n.exc 0.50 Sqm complete all as specified and directed by Engineer- in-charge.

M & L for preparation and treating small articles, area (with tar or coal tar black paint) tarred n.exc 0.10 Sqm each such as hold fasts end of posts, back of chowkhats complete all as specified and directed by Engineer- in-charge.

S & F solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg in SSR Pt II 2010 complete all as specified and directed by Engineer- in-charge.

S & F factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cementfor styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drgs in SSR Pt II 2010 complete all as specified and directed by Engineer- in-charge.

S/F aluminum anodized window shutter including frame having fixed and lovered type ventilator, any type (sliding or open-able ) with frame , & other similar work etc fabricated by using the JINDAL / CENTURY section including necessary arrangement for sliding and locking & to receive 3mm thick sheet glass or wire mesh with aluminium channel beading & stainless steel screws including the cost of rubber gasket / rubber beading and all necessary fitting like mortice lock, aluminium tower bolt, handle, stopper, hinges etc complete . But the weight of the rubber gasket / beading will not be measured with weight of aluminium shutter complete all as specified and directed by Engineer in charge. Note :- Sheet glass & wire mesh shall be measured & paid separately

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ Aluminium shutters/frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads.

S & F sheet glass ordinary quality 4mm thick and glazed with oil putty or fixed with beads in square n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer- in-charge.

S & F 3mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in suqares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer- in-charge.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides complete all as specified and directed by Engineer- in-charge.

S & F 100mm long stainless steel butt hinges complete all as specified and directed by Engineer- in-charge.

Preparation of new or previously untreated, wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer- in-charge.

M&L for Preparation of old painted wooden surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F Alu. Anodised barrel tower bolts of extruded section 100mm long dia. complete all as specified and directed by Engineer- in-charge.

Suppy & Fix Alu. Anodised handle 150mm long extruded fabricated type complete all as specified and directed by Engineer- in-charge.

S & F aluminium sliding door bolt with hasp & staple bolt type & fixing clips sheet cast of extruded section and fixing bolts 300mm size complete all as specified and directed by Engineer- in-charge.

Demolition of RCC concrete of any description and in any position for portion ordered to be dismantled by Engineer in charge complete all as specified and directed.

M & L for RCC 1: 1.5 : 3 (nominal mix) type A1 20mm graded aggregate as in lintels, slabs staging for water tanks etc complete all as specified and directed by Engineer- in-charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L for TMT bars 10mm dia and over cut to length bent to shape reqd including cranking bending, spirally for hooping for columns, henking end and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer- in-charge.

Ditto all as per item No. 70 herein before but 6 to 8 mm dia bars as in distribution bars complete all as specified and directed by Engineer- in-charge.

Dismantling of water tank capacity exc 250 & n exc 500 Ltrs and removing to store complete all as specified and directed by Engineer- in-charge.

S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR Part -I (2000 Ltrs) capacity complete all as specified and directed by Engineer- in-charge.

S & F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 25mm complete all as specified and directed by Engineer- in-charge.

S & F in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and WC (SP) Complete in lean concrete fixed in repairs complete all as specified and directed by Engineer- in-charge.

S & F 110mm PVC (SWR) WC connector with lipring complete all as specified and directed by Engineer- in-charge.

S & F PVC (SWR) pipes single socketed in any length fixed to wall or laid under floor of 110 mm dia jointed with solvent cement complete all as specified and directed by Engineer- in-charge.

All as per item No 77 here in before but dia of pipe 75 mm complete all as specified and directed by Engineer- in-charge.

S & F PVC (SWR) access door any, radius 110 mm bore complete all as specified and directed by Engineer- in-charge.

All as per item No 79 herein before but bore of pipe 75 mm complete all as specified and directed by Engineer- in-charge.

S & F in repairs PVC flushing cistern 10 ltr capacity high level with inlet ball valve float chain and pull and brackets and flush pipe 32mm dia PVC for high level PVC flushing tank complete all as specified and directed by Engineer- in-charge.

S & F in repairs PVC connections 15mm size with PTMT nuts, 600mm long complete all as specified and directed by Engineer- in-charge.

S & F PVC SWR floor trap plain with grating including jointing with solvent cement, dia of outer 75mm complete all as specified and directed by Engineer- in-charge.

S & F PTMT grating doom 100mm dia complete all as specified and directed.

S & F high density polythylene pipe (HDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceiling or in trenches or floors etc bore of pipe 32mm complete all as specified and directed by Engineer in charge.

S & F bib taps cast copper alloy, fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and directed by Engineer- in-charge.

S & F in repairs urinal bowl type complete including providing and fixing plug bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws pointing around urinal back in cement, including 15mm brass stop cock and waste coupling brass CP, (Urinal bowl flat back size of 465x355x265mm) white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed by Engineer in charge.

S & F in repair vitreous china wash basin, white flat back size 550 x 400mm including brackets,cutting for and pinning in ends of brackets and brass 32mm CP waste fittings etc complete; fixed in repais complete all as specified and directed by Engineer- in-charge.

S & F in repair pillar taps, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe of bore 15mm complete all as specified and directed by Engineer in charge.

S & F floor door stopper 150 mm long aluminium alloy body anodized with hard drawn steel spring complete all as specified and directed.

S & F in Alu wire mesh 0.45 mm nominal dia of wire and width of aperature 1.40mm & fixed with aluminium wire staple.

S & F in repairs towel rails 60 cm long brass chromium plated 20mm dia with brackets fixed to walls in repairs complete all as specified and directed by Engineer- in-charge.

S & F soap dish vitreous china coloured approximate size (160mmx160mmx90mm) fixed in repairs complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20mm thick for laying floor finish in cm 1:6 complete all as specified and directed.

M&L for Chequred cement colured tiles 20x20x25mm thick set & jointed & pointed in neat cement slurry in floors complete all as specified and directed by Engineer in charge.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

Excavating in trenches, n. exc. 1.5m wide and n. exc 1.5m in depth for foundation etc getting out hard/desne soil complete all as specified and directed by Engineer in charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm Hard/dense soil complete all as specified and directed by Engineer in charge.

Removing of surplus spoil n. exc. 50 M & depositing where directed at a level n. exc. 1.50 M above the starting level in soil complete all as specified and directed by Engineer in charge.

M&L for preparing new plastered or unplastered surfaces of wall and applying 2 coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer in charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and beewax polishing and 20mm thick screed bed in CM 1:6 complete.

M&L for machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick on vertical wall aurface over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror bee wax polishing complete with 10mm thick screed bed in CM 1:4 complete all as specified and directed.

S & F mild steel frame work confirming to Fe 290 Gde-E-165, such as grills gratings etc, with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, and similar work complete all as specified and directed by Engineer- in-charge.

S&F curtain rails 19 mm dia anodised aluminium fixed in repairs complete all as specified and directed by Engineer- in-charge.

S&F brackets for aluminium anodised curtain rail complete all as specified and directed by Engineer- in-charge.

Roughening sufaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed by Engineer In charge.

Taking down carefully copper/aluminium point wiring of light, fan, socket 5/15A or power point complete including fittings such as switches, bell push,electric bell,ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, etc including switch boards and making good disturbed surfaces of wall/ceiling etc so as to match with the existing wall/ceiling/floors etc completely all as directed by Engr-in-Charge.

Taking down carefully sub main wiring including aluminium conductor size 2 x 4 sqmm / GI earth continuity conductor and making good disturbed surface all as directed.

Dismantling old Main Board with MCBs and energy meters of any size and capacity alongwith teakwood boards and depositing energy meter at E/M store yard at Ponda complete all as specified and directed.

M&L sub main wiring with two single core PVC-FR insulated unsheathed stranded copper conductor cable of size 4 sqmm drawn through and including heavy grade rigid PVC conduit 20mm or higher dia as required at site ,totally concealed in walls /floors/ceiling and surfaces on trusse by means of saddles & clips etc including all conduit accessories /fitting/junction box/inspection covers etc of heavy grade ,ISI marked with 4 Sqmm PVC-FR insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified. Note : (i) Two single core cable and one run of earth copper conductor and Conduit pipe will be measured and paid as one unit length

M&L for concealed point wiring with proper colour coding complete with & including cutting chases in walls and PVC insulated unsheathed, flexible, bright annealed multi standard copper conductor single core FRLS cables (Make: ANCHOR/HAVELLS/PLAZA/FINOLEX) 1.5 Sqmm 1100 volts grade drawn through and including heavy grade rigid PVC conduit 20mm or higher dia as required at site, totally concealed in walls / floors / ceiling and surfaces on truse by means of saddles & clips etc including all conduit accessories / fittings / junction box / inspection covers etc. of heavy grade, ISI marked pressed and sunk terminal boxes of factory made 16SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brafass screws and sunk/cup washers for mounting of switches, socket fan regulator etc. including 1.5 Sqmm 1100 volts grade PVC insulated FRLS, unseathed flexible, multi stranded copper conductor cable as continous earth wire connected to metallic bodies of luminiries / fan etc. at one end to common earth dolly at other end and carrying out IR test for each circuit all as directed by E-in-Charge for one light point controlled by one way switch.

All as per Item No 112 but One fan/Exhaust point controlled by one way switch and one regulator.

All as per Item No 112 butOne 3 pin switch socket outlet 5A on independent board.

All as per Item No 112 butOne 3 pin socket outlet 5A on same board with other switch

All as per item No. 112 above but with cable size 2.5 sqmm for switch socket outlet point 15A on independent board including 2.5 sqmm PVC insulated copper earth continuity conductor to common earth and carrying out IR test all as specified and directed.

S & F switch piano, flush type single pole, one way 5 Amp all as specified and directed

S & F switch socket combination 2 in 1,3 pin 5 Amp white finish complete all as specified and directed.

S & F switch socket combination 2 in 1, 3 pin 5 and 15 Amp flush type universal all as specified and directed.

S & F surface ceiling rose made of bakelite of size 65mmx50mm with 3 terminals and PVC block. Ceiling rose will be fixed on PVC block.white finish complete all as specified and directed.

S & F lamp holder insulated body suitable for batten fitting white finish complete all as specified and directed.

S & F LED bulb 9 watt, base cap B-22, color temp 6500K for fitting in holder, Cat Part No of Havells LHLDEUEEML8R009 or equivalent in Luker / crompton greaves complete all as specified and directed.

S & F LED tube light fittings,Batten type 1 x 20 W, 230V ,6000K Cat Part No of Havels LUMILINEBS20WLED865SPCWH or equivalent / Luker / crompton greaves complete all as directed.

S & F exhaust fan AC single phase 230/ 240 V of size 300 mm sweep, ISI marked with louvre including taking down Exhaust fan and depositing to E/M store yard at Madgaon. Make : Bajaj / Havells / or eqivalent.

S&F electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified

S & F copper cord flexible 3 core, 1.00 sqmm including dismantling old unserviceable one as directed by engr-in-charge..

S&F double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed. Make: Havell's/Schneider/L&T.

S & F SPN (DP) - 32A, 240V MCB, C-curve. connected with suitable lugs complete all as specified and directed. Make: Havell's/Schneider/L&T.

S & F SP 6A -32A, 240V MCB, C-Curve connected with suitable lugs complete all as specified and directed. Make: Havell's/Schneider/L&T.

S & F single phase temper proof 10-60 Amp electronic meter with LCD display including high grade engineering plasic meter box with transparent base and having hinge type locking arrangement suitable for keeping single phase energy meter and fixed on teakwood boards all as specified and directed. Make : L&T/HPL/ Secure

Taking down carefully Ceiling fan of 1200 mm sweep including taking down rod and deposit to E/M store yard at Ponda and S & F Energy efficient BEE Star rated with 5 Star rating ISI Marked with CM/L No ceiling fan of capacity 1200 mm sweep, copper wound , operating on 230 V AC, 50 Hz confirming to IS-374 (Latest) with out regulator and with standard fittings like down rod, Aluminium blades of standard thick ness(1.1 mm), clamps etc complete including provision of 2 core PVC sheathed flexible cable of 23/0.0076 from ceiling rose to ceiling fan all as specified and directed by Engr-in- Charge. Make- Bajaj/Havells/Crompton

Earthing complete with Galvanised GI earth electrode 60cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 M deep below natural ground level) with top edge of plate not less than 1.5 M below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts & nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I 2009, connecting to earthing test point all as specified or indicated including necessary earth work/excavation in hard/dense soil provision of PCC 1:4:8 type D2 using 20 mm graded aggregate foundation for Pit RCC 1:2:4 type B1 cover slab 25 mm thick with 6 mm dia MS bar @ 100mm c/c both ways waater pipe GI light grade 20 mm dia GI light grade and lead protection pipe GI light grade 15 mm dia from pit to main switch complete all as directed including testing on completion.

S&F security light fitting LED 20 W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07. Cat Part No : ENDURAPEARLSL20WLED757SASYTOPCMP Havells or equivalent other makes in Phillips / Bajaj / Wipro/Crompton Greaves.

M&L for bracket made out of GI pipe 25mm dia medium grade, 0.5 mtr long bent to shape with MS flat iron clamps made out of suitabe thick FI nuts, bolts and fixing on wall complete all as directed by Engr-in-charge incl. taking down old unsv bracket complete all as specified and directed.

VXL AND COMPANY

Sagar Constructions

SHREE THATWAMASSY CONSTRUCTIONS PRIVATE LIMITED