Proposed Construction and Development of Mira-Bhaindar Municipal Corrporation Head Office. Name of Client-Mira Bhaiandar Municipal Corporation.(Basic Facility Development Fund)

Amount

Description

Item no 1 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to there quired grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m .and spreading for embankment or stacking as directed.By Manual Means.(Item used only when Quantity is below 10 Cu.m.)

Item no 2 Excavation for foundation in hard murum and boulders including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. a) Upto 1.50m lift Normal Rate b) 1.50m to 3.00m lift, Add 10% c) 3.00m to 4.50m lift, Add 20% d) 4.50m to 6.0m lift, Add 30%

Item no 3 Excavation for foundation in soft rock including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. a) Upto 1.50m lift Normal Rate b) 1.50m to 3.00m lift, Add 10% c) 3.00m to 4.50m lift, Add 20% d) 4.50m to 6.0m lift, Add 30%

ltem no 4 Excavation for foundation in hardrock by chiselling and wedging or line drilling including shoring and strutting, dewatering a snecessary and disposing off excavated stuff asd irected etc. complete

Item no 5 Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete.

Item no 6 Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Item no 7 Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Super intending Engineer will be necessary)

Item no 8 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Item no 9 Conveying excavated material upto lid of 20KM

Item no 10 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC ,carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401--Plant Mix Method and Grading - II Material

Item no 11 DENSE BITUMINOUS MACADAM : Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS,l aid over apreviously prepared surface, finished to the required grade, level, alignment ,and rolling to achieve the desired density for 76-100 mm compacted thickness .USING Batch mix type hot B129 mix plant with SCADA, Sensor Paver,Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates)

Item no 12 WetMixMacadam--Providing,laying,spreadingandcompactinggradedstoneaggregatetowetmixmacadamspecificationincludingpremixingtheMaterialwithwateratOMCinmechanicalmixplantcarriageofmixedMaterialbytippertosite,layinginuniformlayerswithpaverinsub-base/basecourseonwellpreparedsurfaceandcompactingwithvibratory roller to achieve the desired density. Laying By Grader/Paver.

Item no 13 BITUMNOUS CONCRETE :-Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, pre mixed with HIMA Grade bituminous binder like ART (Highly Modified Asphalt Binder having not less than 90° C Softening Point and not less than 90% Elastic Recovery) @ 5.4% (percentage by weight of total mix) and lime filler @2 % (percentage by weight of Aggregate) prepeared in Batch Type Hot Mix Plant and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped withe l ectronic sensor to the required grade, level and alignment and rolling with smoothwheeled, vibratory and tandem roller s to achieve the desired 40 / 50 mm compacted thickness and density as per specification, complete and as per directions of Engineer-in-Charge.

Item no 14 Prime coat- Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning of roadsurface and spraying, primer at the rate of 0.60 kg/sqm using mechanical means.

Item no 15 Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T.surface2.5kg/10sqm.(VG-30bulkbitumen rates are considered to arrive at rates)

Item no 16 Providing and laying in situ / ready mix / ready mix M20 cement concrete of trap / granite / quartzite / gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer / concrete batch mix plant (pan mixer) with natural /artifical sand)

Item no 17 Providing and laying Cast in situ/Ready Mix cement concrete in M30 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering ,formwork ,coverblocks ,laying/pumping ,compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel ) etc.complete ,withfully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batchmix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item no 18 Providing expansion joints with 25 mm thick bituminous pad as per detailed drawings etc. complete.

Item no 19 Providing and laying in -situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement,coarse and fine aggregate (natural sand/VSI grade finely washed crushed sand conforming to IS383, using fine and coarse aggregates combined gradation asper Table 600-3ofMORTHSpecification2013,mixedinaTiltingtypeConcreteMixerasperapprovedmixdesign,admixtures,spreading,layingcompactingandfinishedinacontinuousoperationwithoutpavermachine,finishingtolinesandgradesasdirectedbyEngineer-in-charge and curing by curing compound/ by providing cement vatain cement Mortar1:[email protected] centretocentre, admeasuring80mmatbottomand40mmattopwithdepthof75mmandmaintainingthesamethroughoutcuringperiodbyanyothermethodapprovedbyEngineer-in-charge.withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concrete Batch mix plant (Pan mixer) etc. complete.

Item no 20 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item no 21 Providing and laying Cast in situ /Ready Mix cement concrete M-30 of trap / granite / quartzite / gneiss metal for R.C.C.beams and lintels as per detailed designs and drawings or as directed including steel centering , formwork ,coverblocks , laying / pumping , compaction and roughening the surface if special finish is to be provided and curing etc.complete.(Excluding reinforcement and structural steel ).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batchmixplant (Panmixer) etc.complete.With fine aggregate (Crushed sand VSI Grade)

Item no 22 Providing and laying Cast in situ /Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, coverblocks, laying /pumping, compacting and roughening the mifspecial finishis to be provided and curing complete.( Excluding reinforcement and structural steel ).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade

Item no 23 SlabProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.slabsandlandingsasperdetaileddesignsanddrawingsincludingsteelcentering,formwork,coverblocks,laying/pumping,compactionfinishingtheformedsurfaceswithcementmortar1:3ofsufficientminimumthicknesstogiveasmoothandevensurfaceorrougheningifspecialfinishistobeprovidedandcuringetc.complete,(Excludingreinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushedsand VSI Grade)

Item no 24 Providing and fixing in position HCRM/CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Item no 25 Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part3) -1984 in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Item no 26 Providing and constructing masonry in Auto claved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS2185 Part III 1984 of size (625 x 240 x 100) mm in extra fine jointing mortar of fixoblock of in half brickthick wall including 2 hoopironstrips 25 mm x1.6 mm at every third course, properly bend and bonded at end sscaffolding racking out joints and watering compete

Item no 27 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Item no 28 Providing internal cement plaster 12mm. Thick in Single coats in cement mortar 1:3 with out neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.

Item no 29 Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10% or water by 15 to 20% allowing to dry for 6 to 8 hours After applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70% by roller. (With prior approval of S.E.)

Item no 30 Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases (NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram / 15l). plaster crack should be filled by Acrylic base Crack seal / Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist.

Item no 31 Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface .RCC pardi /Wall and all type of Interior, Exterior Compound wall and Gate etc.of cladding processed stone with material of Processed clay, Wooden chips, Silicasand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge)

Item no 32 Stamp Concrete of 100mm Thickness-Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement,coarse and fine aggregate (naturalsand/VSI grade finely washed crusheds and )Confirming to IS383,as per mixed in a batching and mixing plant/non tilting mixer and weigh batcher as per approved mix design,admixtures,transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi),spreading,laying with approved make pover,compacted and finished in a continous operation,finishing to lines and grades. Also Providing,Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method@5kg per sqm.Including texturing,and covering with plastic sheet(min200micron thickness) and also applying two coats of UV-stable,30%solids clear sealer@150 to 250gms per sqm using surface roller and protecting from falling dust,dirt and curring by curring compound/by providing cement vata in cement Mortor1:[email protected] center to center,admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same through ou tcuring period by any other method approved byEngineer-in charge or Landscape architect etc.complete.(prior approval of superinteding Engineer will be necessary ) SSR/54.01

Item no 33 Providing and casting in situ or precast tap ering R.C.C.M-20 Barrier type Kerb with gutter (as per IRC 861983) embedded 125 mm below ground level over M-10 PCC finished neatly with C.M.1:2,setting the same in C.M.1:2,including the required excavation in any strata and removing the excavated stuff any where incityandredoingthesurfaceasspecifiedanddirectedbyEngineeringIn-charge.UsingConcreteBatchingand Mixing Plant

Item no 34 Providin g and fixing P.V.C. Rain water pipes of 160 mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S.13592-1992 including proper rain water receiving recess with P.V.C. plug, bend, necessary fittings, suchas, offsets, shoes,i nluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40mm from face of wall a fixing with clips of approved quality and One Number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipe son C.C.or masonry blocks, including necessary scaffolding and maintenance for 3yrs for any leakages or dislocations of pipes.All the P.V.C.fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Item no 35 Providing and Laying hot applied thermoplastic roadmarkingstriponBituminousSurfaceofspecifiedshade/colourof2.5mmthickincluding1.5Refractiveindexreflectorizingglassbeads@250gm/sqm.Thicknessof2.5mmisexclusiveofsurfaceappliedglassbeadsasperIRC35:2015.InitialDryreflectivityRLshallbe>250mcd/sqm/luxmeasuredintheinitial7daysandsustainedreflectivityRLof100mcd/sqm/luxandQdof100mcd/sqm/luxmeasuredattheendof2yearsbymeansofaStandardReflectometerofZehntner,Easylux,DeltamakecapableofmeasuringRL&QDbothaccordingtoIRC35:2015clause15.5.Thefinishedsurfacetobelevel,uniform,andfreefromstreaksandholescompleteasper directionofEngineer-in-chargeandinaccordancewithapplicablespecifications.(ReferMORTHClause803fortechnicalSpecificationand Performancefor IRC 35:2015)..

Item no 36 Painting Line, Dashes, Arrow set con Roads in two coats on new work with ready mixed road marking paintc onfirming to I.S. 164 on Bituminous surface including cleaning the surface of alldirt, dust and other foreign matter, demarcation at siteandtrafficcontrol(Over/Upto __cm wide) (MORTH-803) --______ Surface

Item no 37 Providing and fixing Mandatory/ Regulatory sign boards incircular shape of______mm dia made out of____mm aluminum sheet bonded with white retroreflective sheeting of Class B (TypeIVH igh intensity micro -prismatic grade sheeting-HIP)havingpressuresensitive/heatactivatedadhesiveretoreflectivespecifiedbackground,borderandbacksideretoreflctivesymbols,letters,numerals,arrowasperIRC:67-2012TableNo8.3Supportedwithbacksupportframe25mmx25mmx3mm,dulypaintedonbacksidewithgreystoveenamelpaintandsupportedononeno.ofM.S.angleironpostofsize65mmX65mmX6mm,3.45mlong,dulypaintedwithwithflatoilpainthavingalternateblackandwhitebandsof25cmwidthincludingG.I.fixturesetc;fixingtheboardsinM25gradeconcreteblockofsize60cmX60cmX75cmincludingtransportationetc;complete.ClassB(TypeIVHighintensitymicro-prismaticgradesheeting-HIP)shallhave7yearswrittenwarrantyfromthemanufacturerandauthoriseddistributor/convertorissuedforfieldperformanceincludingthescreenprintedareasandcut-outsheetingandcut-outdurabletransparentoverlayfilmandthiswarrantycertificateinoriginalshouldbesubmittedtotheEngineer in charge by the contractor/supplier. 232outsheetingandcut-outdurabletransparentoverlayfilmandthiswarrantycertificateinoriginalshouldbesubmittedtotheEngineer-prismaticgradesheeting-HIP)havingpressuresensitive/heatactivatedadhesiveretoreflectivespecifiedbackground,borderandbacksideretoreflctivesymbols,letters,numerals,arrowasperIRC:67-2012TableNo8.3Supportedwithbacksupportframe25mmx25mmx3mm,dulypaintedonbacksidewithgreystoveenamelpaintandsupportedononeno.ofM.S.angleironpostofsize65mmX65mmX6mm,3.45mlong,dulypaintedwithwithflatoilpainthavingalternateblackandwhitebandsof25cmwidthincludingG.I.fixturesetc;fixingtheboardsinM25gradeconcreteblockofsize60cmX60cmX75cmincludingtransportationetc;complete.ClassB(TypeIVHighintensitymicro-prismaticgradesheeting-HIP)shallhave7yearswrittenwarrantyfromthemanufacturerandauthoriseddistributor/convertorissuedforfieldperformanceincludingthescreenprintedareasandcut-outsheetingandcut-outdurabletransparentoverlayfilmandthiswarrantycertificateinoriginalshouldbesubmittedtotheEngineer in charge by the contractor/supplier. 232 Road Furniture a MORTH 801 600 mm dia made out of 1.5mm aluminum sheet

Item no 38 Supplying and Fixing of Molded Shank Raised Pavement Markers/ Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with microprismatic lens capableofprovidingtotalinternalreflectionofthelightenteringthelensfaceandshallsupportaloadof16000kgtestedinaccordancetoASTMD4280TypeHandcomplyingtoSpecificationsofCategoryAofMORTHCircularNoRW/NH/33023/10-97DOIIIDt11.06.1997.Theheight,widthandlengthshallnotexceed50mm,100mmand102+/-2mmandwithminimumreflectiveareaof13Sqcmoneachsideandtheslopetothebaseshallbe35+/-5degree.Thestrengthofdetachmentoftheintegratedcylindricalshanks,(ofdiameternotlessthan19+/-2mmandheightnotlessthan30+/-2mm)fromthebodyistobeaminimumvalueof500Kg.Fixingwillbebydrillingholesontheroadfortheshankstogoinside,withoutnailsandusingepoxyresinbasedadhesiveaspermanufacturer'srecommendationandcompleteasdirectedbytheengineer.Thecontractorshallsubmitatwoyearwarrantyforsatisfactoryfieldperformanceincludingstipulatedretro-reflectance of the reflecting panel, to the Engineer.

Item no 39 Providing and fixing mild steel grill gate as per the detailed drawing including hinges, lock in garrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.)Spec.One Number: As directed by Engineer- in-charge.

Item no 40 Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram)

Item no 41 Supply, fixing and installation of 4 mm thick Aluminium Composite Panel (ACP) of approved colour for externalcladdingincombinationofsolidandmetalliccolours,includingallnecessaryFramework,supportandcompleteweathersealingasperarchitecturaldrawing.TheAluminiumCompositePanel(ACP)shouldbemadeoutofthermoplasticcoreoflow-densitypolyethyleneLDPE(100%virginmix),sandwichedbetweentwoaluminiumsheetsofALLOYGRADE-5000series,eachnotlessthan0.50mmthick,totalthicknessofaluminiumcompositepanelsnottobelessthan4mm,theexposedsurfacethereofshallhaveStovelacqueredfinishingcoatnotlessthan(26+-2)micron(containingminimum70%kynar500basedPVDF)ofcolourandshadeasperarchitecturaldesign.Theinsidesurface(facingthebuildingexteriorsurface)shallhavepolysterbasedpowdercoatingnotlessthan25Micronwithprotectivepeel-

Item no 42 Providing and fixing of 1200mm high glass fibre reinforced composite railing for footpath made of 80x80x8mm inverted proflies for fencing colums, 50x50x6mm profiles slottedas horizontal member, 25x15 rod for verticle member4s, SMC moulded square ring and cap including cover ring for 50x50mm tube, column shall be fixed on MS, base plate ....etc\ Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Item no 43 Designing, Providing & Installation of Wall mural related to freedom fighter, outside the jail wall as shown in the picture below . The material for this sculpture is Fibre/FRP . The Length of the mural should be minimum 15m with minimum height of 3 m, Size of the mural shall be in proportionate to the height of the sculpture. Thickness of FRP material should be 5-10mm. Including all cost of design, Making models (if any), making mural, inspection charges, Transportation, Fixing at site, Construction of Foundation in RCC- M20 Grade Concrete including Reinforcement(TMT/FE 500), Pedestal including all material required for fixing the mural, coating the pedestal with Coaltar Epoxy Coating, all Filling material upto the base of mural, polishing and painting of the mural, as directed by Engineer in Charge. (Variation in size off mural shall be +-10% in Length, Width and Height shall be permitted.) Inclusive all taxes Exclulding of GST .etc. Complete.

Item no 44 Empty boring for 525 to 600 mmdia. Bored R.C.C. cast in situ piles including withdrawal of shell, removal of earth to a distance of 50 metres etc. complete.Spec :(As directed by Engineer in Charge)

Item no 45 Providing and laying cast insitu/ Ready Mix Cement ConcreteM 30 for bored piles each of load capacity and as per design and of 600mm diameter or as directed placed through steel shells sunk to there quired depth through all strata except rock excluding provision of reinforcement as per detailed drawings and design approved by the Engineer-in charge including placing withfully automatic microprocessor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by tremie arrangements,compaction of concrete including chipping and dressing and withdrawal of shell etc. complete. (Excluding steel reinforcement)

Item no 46 Chiseling through pile shells in hard strata like boulders, soft and hard rocks Upto and inclusive of 550mm diameter including removing and stacking the loose materials etc. complete and disposing of the unserviceable materials outside complete.

Item no 47 Chipping and dressing of the R.C.C. piles upto 0.60 meter including cleaning reinforcement and removal of dismantled materials upto a distance of 50meter beyond the building area etc. for providing pile caps.Spec :(As directed by Engineer in Charge)

Item no 48 Providing placing and Driving in position 6 milli meter mildsteel liner for R.C.C.Piles upto required depth with 12mm thick mildsteel cutting edge of 0.50m length at bottom including fabricating cutting the mildsteel sheet to required diameter and shape, welding the joints and driving with the help of required machineries including all materials labours and lifts etc. complete as directed by the Engineerincharge. Spec:(As directed by Engineer in Charge From 3.00 to 9.50 meter deep liner

Item no 49 Carrying out load test for 1.5times the proposed safe working load on the pile in driven position above 550mm and upto 650mm diameter including construction of test cap, use of accessories and instruments including providing graphs as per I.S.code or Std. Specifications and dismantling the test cap after testing and cleaning the site complete.

Item no 50 Excavation : Excavation for foundation in soft strata which does not required blasting up to 1.5 Mtr. depth including removing the Excavated material up to a distance of 50 Mts. beyond the building area and lift. (PWD-DSR 2015-2016) P-5 / I-A-1

Item no 51 GARDEN SOIL :- Supplying on site garden soil well sieved 90% to pass through I.S. sieve of 10mm size Free from stones rubbish like dried grass roots and other such materials. The soil should be fresh be measured by measuring box (Farma) Item includes royalty charges, octroi, corporation Tax Transporting, loading – unloading etc

Item no 52 Farm yard manure :- Supplying on site well decayed, well dried, well powedered, withought clods and free from stones, dried grass and other rubbish material,. The colour of the manure generally be black. the manure will be measuring by measure box. (farma) item includes Transporting, loading -unloading etc (lead charges per 40km. are considered.

Item no 53 Preparing Instant Lawn : Excavating the ground to a required depth of 20cms removing & conveying unwanted stuff to a required distance as directed. filling fresh garden soil / silt & manure in excavated area in 3:1 proportion to a height of 20cms. Mixing garden soil and manure thoroughly will levelling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering weeding clopping rolling etc. complete

Item no 54 Preparing Shrubbery :- Excavating the round to required depth of 30cms, removing and conveying unwanted stuff to a required excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil & manure toughly well, leveling , watering on previous As derected by Engineer-Incharge.

Item no 55 Supplyings & planting of plants required for landscaping:- Euphorbia, hemelia, Malphejia, Ticoma, song of India, Golden bamboo, Bhudhhaj bamboo, golden ficus, Phonicu palm, x mass trees ficus panda, etc. (height of plant 5-6 ft )

Item no 56 Planting large6flowering / shady trees :- Digging pit with size 0.9m x 0.9m x 0.9m removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30m and remaining height of 0.60m with fresh garden soil & manure in 3:1 proportion Mixing soil & manure thoroughly well. leveling as directed, watering previous night, planting on to two year old healthy trees sapling as per specifications. Maintaining till well established by watering weeding, stirring of soil replacing of casualties etc. complete.

Item no 57 Providing forest trees putranjiva, jaccaranda, bakula, kecia, Neem, shoka Gulmohar 8 feet to 10 feet.

Item no 58 Providing and supplying palm trees vaieties, red palm, fox tail palm, botttol palm, Rhaphis palm, Table palm, Cristle palm, cene palm, Ashoka etc.. Size 10-12 feet

Item no 59 Planting clipped Hedge:- Excavating the ground to a required depth of 30 cmt, removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and manure thoroughly well, leveling, watering previous night. Planting hedge plant of required species in two rows. Distance between two rows & between two cutting will be 25cms. Maintaining till well established by watering, weeding, stirring the soil and clipping if necessary etc. complete.

Item no 60 Preparing Canna Bed:-Excavating the ground to the required depth of 30cms.Removing rubbish and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a required height of 30cms.Mixing gar den soil & manure thoroughly well, leveling, and watering on previous night. Planting well developed Canna rhyzomes 40 cms apart. Maintains till well established by watering weeding, stirring, replacing, casualties etc. complete.

Item no 61 Mogra Plant /Creepers/Climbers:-Excavating pit with size 0.3m x 0.3m x 0.3m, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material up to a height of 0.15 mtr. and remaining height of 0.15mtr.with fresh garden soil and manure in 3:1 proportion. Mixing soil and manure thoroughly well leveling, watering, on previous night. Planting one or two year old healthy plant as per specifications. Maintaining till well established by watering, weeding, pruning, stirring, replacing casualties, etc. complete.

Item no 62 Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.

Item no 63 Supplying and erecting HMS PVC conduit necessary accessories in wall/floor with chiselling appropriately as perFRLS grade 25 mm dia. With specification NoSupplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.: WG-MA/CC.

Item no 64 Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in prSupplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BWovided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Item no 65 Supplying and erecting Concealed type foot/step light Max. 5W having IP67. IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs. at L70B50, including driver by making necessary arrangement/recess in wall to make it flush with surface with 2 Year warranty.

Item no 66 Supplying & erecting integral post top lantern fixtures (globe type) suitable for LED lamp upto 12 W consisting of aesthetic round clear acrylic top cover, cast aluminium pole cap on provided pole /bracket as per specification no. FGODF/ PTL.

Item no 67 Supplying and erecting integrated LED street light fitting 160-170W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 19000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140- 270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/ FLS2.

Item no 68 Supply installation & Commissioning of IoT System Controller / Gateway for electrical and allied services with Inbuilt GPRS, WIFI, LAN Capabilities for Multifunction Meters, Level Sensors , temperature sensors etc. and able to collect data from communicable device of available protocol on real time basis with following specifications 1) ARM based Controller (1.6 Ghz processor with 1.2 GB RAM with inbuilt 16GB memory 2) Inbuilt 4G/3G/GPRS modem with fallback and suitable antenna to communicate with cloud 3)Data services must be from at least two reliable service providers and system should support automatic switching to 2nd service provider in case of low network without any intervention. System should support changing of service providers without changing SIM cards 4)Gateway must have Modbus, MBUS, Ethernet and DLMS Any other future open-source protocol (that uses RS485 or TCP port) mustSupplying and fixing manageable wireless 2x2 Mesh Router, 50 m range, dualband 802.11 n/ac unified wireless access point complete as per specification no. WG-NAS/LAP1 be provided free of cost for the period of at least 1 year 5) Must have one RS485 and one ethernet port 6) The controller must send data with TLS encryption and the data on controller must be encrypted 7) Operable with 230V AC supply Gateway shall collect maximum 15-20 devices for data collection 8) Software shall support for AI application with critical alarm on mobile app

Item no 69 Supplying and fixing manageable wireless 2x2 Mesh Router, 50 m range, dualbandn 802.11 n/ac unified wireless access point complete as per specification no.WG-NAS/LAP1

Item no 70 Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Item no 71 Supplying & erecting UV Fly killer/ bug catcher Light Fitting having 2 x 20W UV Tube Lights to cover min. area of 500 sq.ft with powdered coated M.S./ steel body suitable to work on 230V, AC Supply having top mounting arrangement with SS chain complete and 3 core 1 mtr. flexible wire with 1 year warranty.

Item no 72 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Item no 73 Supplying and erecting white footlight with 4 modules concealed modular box and LED lights with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and mortar / POP as per required and duly connected.

Item no 74 Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL

Item no 75 Supplying and erecting 25 m (clear height) motorized high-mast (Top-200mm, Bottom- 560 mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S 355/E350 & 3+4+5 mm thickness, with base plate 25 mm thick x OD 730 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel - 316 grade 2 nos., 7x19 construction 6 mm, SG-DG U clamps, double drum winch assembly 600 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 16 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete. specification no.OH-PL/HM (excluding luminaries)

Item no 76 Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Item no 77 S u p p l y i n g & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Item no 78 Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Item no 79 Supplying and erecting shockproof 3 pin plug socket 6A with porcelain base / flush type erected on filled polypropylene board or polished thick varnished double wooden block / folded or screwed board with top of either wooden / 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick laminate with S M screws and duly connected.

Item no 80 Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA

Item no 81 Supplying, installing, testing & commissioning cassette type room Air conditioning unit 4TR to 4.4TR capacity with refrigerant R32/410A 415V, 50 Hz, A.C. supply having 1 no of air handling unit (Mega split) mounting type complete with temperature display on indoor unit, minimum dust filter, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Item no 82 Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.

Item no 83 Supply, installation, testing & commissioning of 4MP IP Bullet Camera with 1/2.8", progressive scan, CMOS, 4/6mm lens@ F1.8/2.0, angle of view more than 82° WDR 120db or above, Illumination Colour: 0.02 Lux (F1.8), 0.0Lux with IR, Day/Night with auto switch ICR, supported H.264/H.265 MJPEG video compression, Smart function supported motion , IP66,CE, ROHS.

Item no 84 Supply Installation Testing & commissioning Of Network Video Recorder 32 channel input, Support 2-ch HDMI Up to 12 Megapixels resolution recording, Support RAID 0, 1, 5, 6, 1 & 8 SATA HDDs, Up to 8TB for each HDD, Support N+1 Hot spare, Support for 12V Power output, HDMI/VGA Output, Recording Resolution, Resolution 12MP/ 6MP/5MP/4MP/3MP/1080p /960p/720p /D1/2CIF/CIF, Compression H.265/H.264, 8 SATA interfaces, Capacity up to 8TB for each HDDs, Array Type RAID 0, 1, 5, 6, 10.

Item no 85 Supply Installation Testing & commissioning of 6000 GB Hard Disk for video Surveillance Equivalent to:- Western Digital /Seagate

Item no 86 Supply Installation Testing & commissioning of 43" LED TV Monitor Equivalent to:- LG/Samsung

Item no 87 Supplying and fixing 6UWall Mount Rack (Dimension-DxWxH 450x550x367 mm) as per specification No. WG-NAS/RAK

Item no 88 Supplying & erecting UPS of 1KVA capacity complete with standard features, along with necessary SMF batteries for 20 mins. battery backup

Item no 89 Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC

Item no 90 Supply , Installation, Testing & Commissioning of UTP Connector (RJ-45) as per specification No. WG-AS/UTPC.

Item no 91 Supplying, fixing, and configuring 8-ports 10/100/1000 Mbps unmanaged gigabit PoE Switch complete.

Gajanan Construction (BID ID -6338406)