Repair, widening and protective work of the narrow bridge located at Km 3 (600) of Singhpur Tiloi Road (ODR) in Amethi district

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.

Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

Plain Cement Concrete Grade M15 in Open Fondation complete as per Drawing and Technical Specifications.

Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1.

Providing and laying Filter material underneath pitching in slopes

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811

Supplying and installation of delineators (road way indicators, hazard markers, object marker) 80-10cm, high above ground level, painted black and white in 15cm, wide strips, fitted with 80x100 mm rectangular or 75 dia circular reflectorised panel at the top buried or pressed into the ground and conforming to IRC:79 and the drawing. and E-in-c Circular N0.62 issude wide letter no. 879/MT/60MT/2019 dt. 16.01.2019

Painting or vansishing on iron worksin small areas or new wood work with one cost of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work paint to be used should confirm to the I.S.I No. 103 1950. but for every coat on previously painted old wood or steel work.(As per SOR No. 643) Two coat

Please Enable Macros to View BoQ information