Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹10.3 LAccepted-AOC HRBC OFFICE COMPOUND CANTEEN BUILDING 1ST FLOOR MUNSHI PREMCHAND SARANI KOLKATA | ALIPURDUAR | WEST BENGAL | 735204 | L-1 | Accepted-AOC Awarded of Contract | |
| 2 | L-2₹12.5 L+₹2.2 L (20.9%)Rejected-Finance | L-2 | Rejected-Finance Financially disqualified | |
| 3 | L-3₹16.1 L+₹5.8 L (56.2%)Rejected-Finance DIAMOND HERTIAGE BUILDING KOLKATA 700001 | KOLKATA | WEST BENGAL | 700001 | L-3 | Rejected-Finance Financially disqualified | |
| 4 | Rejected-Technical | - | Rejected-Technical Technically Disqualified. |
| Sl No | Description | Qty | Unit | A C ROY SHIPBUILDERS PRIVATE LIMITED L3 | ATANU GANGULY L2 | THE SHALIMAR WORKS (1980) LTD. L1 |
|---|---|---|---|---|---|---|
| 1.00 | Beaching, blocking, unblocking including dock hire and mooring charges as require to be done for complete repair of vessels. Blocking is to be done at sufficient height for underwater inspection, scrapping, chipping, wire brushing, cleaning , repairing and painting as per under supervision of IRS/ IWT surveyor. | 1 | Comp. job | 1,25,000 ₹1,25,000 Lowest | 1,60,000 ₹1,60,000 | 1,72,000 ₹1,72,000 |
| 2.00 | Ultrasonic testing is to be carried out of underwater hull , deck plate, and hull to LWL , ship side plate for thickness as per direction of EIC and inspection of IRS surveyor. | 400 | Spot | 65 ₹26,000 Lowest | 69 ₹27,600 | 66 ₹26,400 |
| 3.00 | Cropping and renewal of under water plate , deck plate, shipside plate and other fitment after ultrasonic testing as per under supervision of IRS/ IWT surveyor and as per direction of EIC. | 1 | ton | 1,25,000 ₹1,25,000 Lowest | 1,38,650 ₹1,38,650 | 1,36,000 ₹1,36,000 |
| 4.00Sea chest, mud box stainer to be checked repaired, cleaned and painted as per direction of EIC and inspection by IRS surveyor. Air vent(p) for sea water mud box should be serviced/repair as per direction of irs surveyor. | ||||||
| 4.10 | Labour charges | 1 | job | 25,000 ₹25,000 | 20,000 ₹20,000 | 10,000 ₹10,000 Lowest |
| 4.20Cost of spare and machining charges on actual plus 10% basis | ||||||
| 5.00 | Chipping, scrapping , wire brusing and cleaning is to be done for painting of vessel from keel to water level.painting of the underwater hull plate and side plate to be done by 3 coat as per painting scheme, marine quality paint after applying 1 coat of anticorrosive paint/ primer from Keel to WL as per direction of EIC and inspection of IRS surveyor & EIC. | 350 | sqm | 300 ₹1,05,000 | 240 ₹84,000 Lowest | 260 ₹91,000 |
| 6.00 | Chipping, scrapping , wire brusing, cleaning and painting is to be done for painting of the entire vessel side shell plate from LWL to main deck, superstructure (cutter unit, spud carriage unit, dredge discharge pipe, ballast tanks, hatches, engine room, man holes, bathroom, bilges, bollards, wheel house, crane,railing including all fitments are properly cleaned and to be painted by 2- coat marine quality paint after applying 1- coat of anticorrosive paint/ primer. | 350 | sqm | 300 ₹1,05,000 | 240 ₹84,000 Lowest | 260 ₹91,000 |
| 7.00All main sea suction valve and line valve along with its entire pipe line to be checked, tested and serviced, repaired/ renewed including other fitment of valve in entire ship as per direction of EIC and inspection by IRS surveyor. | ||||||
| 7.10 | Labour charges | 1 | job | 50,000 ₹50,000 | 40,000 ₹40,000 | 24,000 ₹24,000 Lowest |
Tender Value
₹14.2 L
EMD Value
₹29,000
Closing Date
4 Jul 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Director
Sanjay Nagar Colony BSNL Exchange Building Nati Imli Varanasi 221002
Dry-dock repair of PT Birsamunda in NW-I for the F.Y.2025-26
2025_IWAI_866196_1
IWAI/VNS/MM(16)/PT Birsamuda/2025-26
Open Tender
Marine Works
Works
Varanasi
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,360
Yes
IWAI FUND SD EMD
₹29,000
Yes
19 Aug 2025
26 Jun 2025
5 Jul 2025
26 Jun 2025
4 Jul 2025
26 Jun 2025
Amount
Beaching, blocking, unblocking including dock hire and mooring charges as require to be done for complete repair of vessels. Blocking is to be done at sufficient height for underwater inspection, scrapping, chipping, wire brushing, cleaning , repairing and painting as per under supervision of IRS/ IWT surveyor.
Ultrasonic testing is to be carried out of underwater hull , deck plate, and hull to LWL , ship side plate for thickness as per direction of EIC and inspection of IRS surveyor.
Cropping and renewal of under water plate , deck plate, shipside plate and other fitment after ultrasonic testing as per under supervision of IRS/ IWT surveyor and as per direction of EIC.
Sea chest, mud box stainer to be checked repaired, cleaned and painted as per direction of EIC and inspection by IRS surveyor. Air vent(p) for sea water mud box should be serviced/repair as per direction of irs surveyor.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Chipping, scrapping , wire brusing and cleaning is to be done for painting of vessel from keel to water level.painting of the underwater hull plate and side plate to be done by 3 coat as per painting scheme, marine quality paint after applying 1 coat of anticorrosive paint/ primer from Keel to WL as per direction of EIC and inspection of IRS surveyor & EIC.
Chipping, scrapping , wire brusing, cleaning and painting is to be done for painting of the entire vessel side shell plate from LWL to main deck, superstructure (cutter unit, spud carriage unit, dredge discharge pipe, ballast tanks, hatches, engine room, man holes, bathroom, bilges, bollards, wheel house, crane,railing including all fitments are properly cleaned and to be painted by 2- coat marine quality paint after applying 1- coat of anticorrosive paint/ primer.
All main sea suction valve and line valve along with its entire pipe line to be checked, tested and serviced, repaired/ renewed including other fitment of valve in entire ship as per direction of EIC and inspection by IRS surveyor.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Water tight integrity water tight hatch,manhole, ventilation flap wire mess found defective to be changed/replaced of all watertight & gastight fitting along with hose testing/chalk test as under supervision of IRS and as per direction of EIC.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Piping systems including valves and union joints found to be sub optimal and affected by corrosion.recommended overhaul/repair & replacement of valves as per requirement followed by pressure test post overhaul ing as per recommendation of IRS surveyor.
All hydraulic oil supply lines and pressure gauges to be checked or repaired or replaced followed by pressure test as per OEM instruction.
Service tank(p) drain cock leakage of oil should be arrested and serviced/repair.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Main Engine(MAKE: cummins, model; NT855M, SL. No. 25273427, 270 BHP) STARBOARD SIDE complete overhauling is to be done based on running hrs as per recommendation of IRS surveyor and OEM standard.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
B -check main engine port side (MAKE: cummins, NT855M SL. No. 25273448, 270 BHP) should be done along with turbocharger suction hose should be checked and service/replaced as per recommendation of IRS Surveyor/EIC.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
B-Check of DG-2 (Make: kirloskar, model: TAF2) should be done along with silencer pipe on main deck found rusted/corroded should be repair/serviced as per recommendation of IRS surveyor.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Gear box port side(Make: Kirloskar, model no. MG-512/3:1, SL.No. AA0084) and STBD( Make: Kirloskar, model no. MG-512/3:1, SL. No. AA0083) oil leakage to be arrested along with servicing/repairment of entire unit as per oem instruction and direction of IRS.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Both side propeller,propeller shafts and it bushes are to be opened for finding out the clearence and checking the turness.Build up of bushes,shafts and blade etc. and fitted back in OE position as per drawing after fairing with same composition of material/renewed(if required). The propeller,balancing,beddding etc. to be done as required as per direction of IRS surveyor.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Both side rudder assembly to be dismantalled,rudder stock, shaft,bushes to be checked and if required same to be build up as per oe size(as per drawing) and fitted back in position as per oem reccomendation.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
AC/DC electric lines to be checked in wheelhouse/cabins and engine room,dc light,navigation light,search light and search light stand ,switch boards,electrical panel board,electric horn,fans with push button to be checked/repaIr/replace as per direction of irs surveyor.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Wheel house/engine room telegraph panel should be checked and repair/replace.
Wheel house rudder indicator glass along with all digital indicators(p & s) should be checked and serviced/repair.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Main deck fire hosebox , fire hose 02 nos. , fire nozzel 02 nos. same are to be repaired/ renewed and have to make leak free operation and other accessories as required as per direction of EIC / Surveyor.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
All toilet/ washroom taps, valves. Flushing, commode cover and hand shower, officer toilet and water leakage is to be checked and to be repaired or replaced as per direction of EIC.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
05 nos. tyre fenders, 05 nos. steel wire for securing tyre fender,Fwd. wooden fender should be checked and repair/replace or renewed as per direction of EIC.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Rubber fender of vessel all along the vessel found damage should be checked and repair/renewed as per direction of EIC/IRS surveyor.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Clean and painting of bilges with one coat primer and 2 coats of marine quality paints as per direction of EIC/Surveyor
Labour charges
Cost of spare and machining charges on actual plus 10% basis
All water tank is to be cleaned properally and painted by two coat of existing colour marine paint as per direction of EIC and recommendation by IRS Surveyor.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
04 nos. life buoy ,safety helmets etc. are to replace/renewed on board as per direction of IRS.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Mike/speaker(PA) system on wheel house should be renewed as per direction of IRS.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
Supply and installation of Tullu Pump Hi Flow self Priming Monoblock pump (1HP) with suction and delivery pipe length as required as per direction of EIC.
Labour charges
Cost of spare and machining charges on actual plus 10% basis
ATANU GANGULY (BID ID -3243065)
A C ROY SHIPBUILDERS PRIVATE LIMITED (BID ID -3241068)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .