Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.5 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹43.8 L+₹9,610 (0.22%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹44.0 L+₹31,510 (0.72%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹46.1 L+₹2.4 L (5.50%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹46.7 L+₹3.0 L (6.95%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN L1 |
| Sl No | Description | Qty | Unit | SHASHI CONTRACTORS L4 | M/S ASM ENTERPRISES L1 | M/S KUSHWAHA BROTHERS L5 | B R CONSTRUCTIONS L3 | SHRI SHAYAM KRIPA L6 | AMRENDRA CONSTRUCTIONS L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of reinforced cement concrete such as roofs, floors, slab cover, beams, landing,lintel bends and similar suspended work including breacking/demolishing by mechanical means such as electric Breaker/Pneumatic Breaker/Hydraulic Breaker as per the site condition/requirements and removing the debries Out side the MD Land complete all as specified and as directed. | 10 | Cum | 500 ₹5,000 | 400 ₹4,000 | 400 ₹4,000 | 380 ₹3,800 | 100 ₹1,000 Lowest | 300 ₹3,000 |
| 2.00 | M&L for RCC 1:2:4 Nominal Mix Type B-1 using 20mm graded stone aggregate as in Pillars Columns, pillars, piers, posts and Gate Pillars comlee all as specified and directed | 7 | Cum | 8,000 ₹56,000 | 7,000 ₹49,000 | 6,000 ₹42,000 | 5,500 ₹38,500 | 5,000 ₹35,000 | 600 ₹4,200 Lowest |
| 3.00 | Providing steel formwork to sides of pillars, posts, struts, piers, columns etc to rough finish surfaces of concrete complete all as specified and directed | 64 | Sqm | 200 ₹12,800 | 200 ₹12,800 | 300 ₹19,200 | 380 ₹24,320 | 120 ₹7,680 Lowest | 350 ₹22,400 |
| 4.00 | M&L for RCC 1:2:4 Nominal Mix Type B-1 using 20mm graded stone aggregate as inBeams, cantilevers, bressummers,lintels over 1.5m span complete all specified and directed | 3 | Cum | 8,000 ₹24,000 | 7,000 ₹21,000 | 6,000 ₹18,000 | 5,500 ₹16,500 Lowest | 7,000 ₹21,000 | 6,700 ₹20,100 |
| 5.00 | Providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, to rough finish surfaces of concrete complete all as specified and directed | 36 | Sqm | 300 ₹10,800 Lowest | 300 ₹10,800 Lowest | 400 ₹14,400 | 380 ₹13,680 | 500 ₹18,000 | 350 ₹12,600 |
| 6.00 | M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking bending spirally for lintels and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, all as specified. | 1,100 | KG | 99 ₹1,08,900 | 95 ₹1,04,500 | 120 ₹1,32,000 | 99 ₹1,08,900 | 95 ₹1,04,500 | 80 ₹88,000 Lowest |
| 7.00 | Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. | 350 | Kg | 90 ₹31,500 Lowest | 99 ₹34,650 | 120 ₹42,000 | 99 ₹34,650 | 100 ₹35,000 | 99 ₹34,650 |
| 8.00 | M&L precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab/drain cover etc or any other similar work set in CM 1:6 including necessary form work complete all as specified and directed. | 3 | Cum | 8,000 ₹24,000 | 6,500 ₹19,500 | 6,000 ₹18,000 | 5,800 ₹17,400 | 5,000 ₹15,000 Lowest | 6,000 ₹18,000 |
| 9.00 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. | 9 | Qtl | 300 ₹2,700 Lowest | 1,000 ₹9,000 | 500 ₹4,500 | 800 ₹7,200 | 1,500 ₹13,500 | 900 ₹8,100 |
| 10.00 | Dismantling of wooden members such as railing/posts/purline/ rafter/oar any other similar wooden components including stacking of serviceable materials complete alll as specfied and directed. | 6 | Cum | 400 ₹2,400 Lowest | 1,100 ₹6,600 | 400 ₹2,400 Lowest | 1,000 ₹6,000 | 1,500 ₹9,000 | 960 ₹5,760 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
13 Feb 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) B/R Chakeri Kanpur
GE(AF) B/R Chakeri Kanpur-208008
REPAIR OF DAMAGED BOUNDARY , VIEW CUTTER STEEL GATE, GATE PILLARS, HARDSTANDING/PATH, DRAINAGE SYSTEM AND OTHER MISC B/R OTEMS IN N-1 AREA AT AFS CHAKERI KANPUR
2026_MES_749640_1
GE (AF) BR/CHK/T-42 OF 2025-26 8562/A/E8
Open Tender
Civil Works
Item Rate
330 days
GE(AF) B/R Chakeri Kanpur
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE(AF) B/R Chakeri Kanpur
₹80,000
Yes
2 Apr 2026
22 Jan 2026
20 Feb 2026
22 Jan 2026
13 Feb 2026
6 Feb 2026
Demolition of reinforced cement concrete such as roofs, floors, slab cover, beams, landing,lintel bends and similar suspended work including breacking/demolishing by mechanical means such as electric Breaker/Pneumatic Breaker/Hydraulic Breaker as per the site condition/requirements and removing the debries Out side the MD Land complete all as specified and as directed.
M&L for RCC 1:2:4 Nominal Mix Type B-1 using 20mm graded stone aggregate as in Pillars Columns, pillars, piers, posts and Gate Pillars comlee all as specified and directed
Providing steel formwork to sides of pillars, posts, struts, piers, columns etc to rough finish surfaces of concrete complete all as specified and directed
M&L for RCC 1:2:4 Nominal Mix Type B-1 using 20mm graded stone aggregate as inBeams, cantilevers, bressummers,lintels over 1.5m span complete all specified and directed
Providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, to rough finish surfaces of concrete complete all as specified and directed
M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking bending spirally for lintels and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, all as specified.
Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab/drain cover etc or any other similar work set in CM 1:6 including necessary form work complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling of wooden members such as railing/posts/purline/ rafter/oar any other similar wooden components including stacking of serviceable materials complete alll as specfied and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing/grills/gates made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including making hole or cutting through stone/ brick masonry and making good/packing with cement mortar in CM 1:3 complete specified and directed
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.
M&L for 18-20 mm thick granite (Black Jet ) work (table rubbed and polished) in steps jambs, pillars, window -cills cooking platforms and like in cement mortal (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges over and including 10 mm thick plaster in CM 1:6 complete all as specified and directed.
S & F in repairs 1.25 Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap jointswith riveted or welded seams, including bending or turning up, mitred angles, etc. as required Complete all as specified and directed.
Material & Labour for applying two or more (on stishfaction of Engr-in- Charge) coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including complete removal of existing treatment complete all as specified and directed. Note : Bidder shall be considered height of bldgs upto 6 the storey while quoting rates by them and wherever scaffolding is necessary.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete as specfied and directed.
S&F structural steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and directed.
Dismantling of asbestos cement (corrugated or semi corrugated etc) sheet in roof covering complete all as specified and directed
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for making holes/perforation of dia exc 50mm but not exc 100mm in existing old or new fixed Galvalume sheet of thikness 0.50mm, including making drilling/cutting using metal cutter/hole saw, deburring sharp edges, fixing rubber grommets (as required) and ensuring propper air-pasages for ventilations/view cutter installation complete all as specified and directed
ditto as per item no 19 but plain sheet as in ridge complete all as specified and directed
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description exc. 10cm width or girth complete all as specified and as directed.
S&F in repair 1.75 to 2.00mm printed/green PVC sheet fixed or laid on gate/window by using steel winding wire or any other means complete all as specified and directed by Engr-in-charge.
Demolition of Plain Cement concrete of any description at any position of any thickness including breacking/demolishing by mechanical means such as electric Breaker/Pneumatic Breaker/Hydraulic Breaker as per the site condition/requirements and removing the debries Out side the MD Land complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in post holes complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) for in base filling or mass concrete complete as specified and directed.
M & L for 75 mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate as in sub base to floor finished rough to receive top finishes. complete all as specified and as directed by the Engineer-in-Charge
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed .
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles by mechanical/through labourers complete all as directed .
M & L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.
ditto as per item Sl No 30 but except bricks in CM 1:4 complete all as specfied and directed.
Taking down cement plaster on Brick or Stone,concrete walls ,ceiling etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6, finished even and smooth without using extra cement complete all as specified and directed.
Providing and fixing in repair rectangular/circular/square medium duty(weight capacity 2.5 to 5 ton) composite FRP cover anti corrosive with frame for storm drain /inspection chamber/traps/manhole etc having thickness not less than 75mm complete all as specified and directed. Note : Size of the slabs shall be as per site requirement.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.e all as specified directed. Note- Size and shape shall be decided by GE.
Cutting holes in brick walls exc half brick but n.exc one thick in Cement mortar for inserting Posts/struts/angle Iron/ and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required comlete all s specified and directed .
M&L for Providing, cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed
Supply and fixing Designer Outdoor Ceremic wall Tiles of size 300X600mm or 300x450mm and thickness 6-8mm of approved shade and pattern including providing and applying C-2 Grade adhesive having coverage area 3.00-4.00Kg per Sqm,filling the joints of tiles with eppoxy /polymer-modified grout 3-5mm thick including taking down the existing cement plaster/loose materials and applying bonding coats, if required on the direction of Engr-in-Charge/JE-in-Charge conforming IS-15622, Complete all as specified and directed
S&F in repairs Cast iron soil, waste and vent pipes of 75mm in any length with or without ears, with cement joints , fixed to walls all as specified and directed.
S&F in repairs Cast iron soil, waste and vent pipes of 100mm in any length with or without ears, with cement joints , fixed to walls all as specified and directed.
S&F in repairs Cast iron Bends of 75mm ( any radius ), diminishing pieces or tapers (larger bore measuared) all as specified and directed.
S&F Cast iron Bends of 100mm ( any radius ), diminishing pieces or tapers (larger bore measuared) all as specified and directed.
Providing and Laying 12-15 mm thick heavy duty Parking Tiles ant-skid,Interlocking/Chekered designe approved colour & Make for foothpath/parking/lawn tiles of size 300x300 of choice colour fixing over and 20mm thick screed bed in CM 1:6 complete all as specified and directed
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.27 MB
TENDDER.pdf
Tender Documents • 1.49 MB
BOQ_839549.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .