Repair work at staff room and construction of toilet and bathroom at RD 12000 of Harchandpur Disty. (Re-invited)

Amount

Earth work in excavation in foundations, trenches, etc.in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres HSR No.6.6

Cement Concrete 1:3:6 with stone aggregate 20mm nominal size in foundation and plinth HSR No.10.40.

First class brick laid in cement sand mortar 1:4 in foundation and plinth HSR No.11.4.

Damp proof course 75 mm thick of cement concrete 1:2:4 using stone aggregate 20mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 Kg per sqm laid hot and sanded HSR No.10.114.

First class brickwork laid in cement sand mortar 1:4 in first storey upto 4 meters above plinth level HSR No.11.9.

(a) lime concrete, cement concrete of 1:6:12 or leaner mix reinforced cement concrete with cleaning and straightening and cutting of bars if required HSR No.8.6 (e).

Cement Concrete 1:2:4 with stone aggregate 20mm nominal size in first storey upto 4 meters above plinth level HSR No.10.59.

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chhajjas, shelves etc. inclination not exceeding 25 degree with horizontal HSR No.9.1.

Fe-500 EQB TMT steel bars for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete HSR No.18.22.

12 mm thick cement plaster 1:4 HSR No.15.5

Conglomerate floor 25 mm thick cement concrete 1:2:4 on 100 mm cement concrete 1:8:16 and 100 mm sand or stone filling HSR No.14.13.

Deodar wood chowkats of dors and windows including iron hold fasts, corner straps, screws, bolts fasts etc., complete fixed in position HSR No.17.10.

Teak wood door and window shutters, paneled, glazed, or glazed and paneled, including iron hinges, screws, chocks/cleats and stops etc., complete fixed in position (excluding the cost of tower bolts and handles, but including the labour for fixing the same) 35 mm thick (12 mm thick teak wood panel) HSR No.17.37 (a).

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade HSR No.16.3.

Finishing walls with exterior decorative cement based paints such as snowcem, Robbiacem etc. on new work, two coats to give an even shade HSR No.16.61.

Distempering with dry distemper (of approved manufacture) two coats over one priming coat on new work HSR No.16.54.

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of the Engineer-in-charge). INDIAN TYPE ORISSA OR ORYA WATER CLOSET SUITE for sinking into floor, with raised foot treads COMPLETE WITH 100 MM G.C.I.’P’ TRAP with or without vent as required and all OTHER NECESSARY FITTINGS as fully described in item no.30.1 above Size 630 mm White HSR No.30.2 (b) (i).

Tile terracing with one layer of tiles, 22.86 cm X 11.43 cm X 3.81 cm laid dry over a layer of mud mortar including grouting with cement sand mortar 1: 3 and top surface to be left clean HSR No.13.14.

Cement concrete 1:2:4 gola 10cm X 10cm quadrant along junction of roof with parapet wall finished smooth, where specially specified HSR No.13.14.

Providing and fixing PVC rain water pipe 6 kg. pressure of ISI mark in cement mortor during masonary work 150 mm dia PVC pipe 6 Kg. Pressure HSR No.13.89 (b).

Khurra on roof as per item No. 13.50 with C.I. spouts and fixing in position HSR No.13.51.

Credit for old steel

THE BHUSHAN CO. OP L and C SOCIETY LTD. BAHIN