Prov. LWSS to Basa Mahog Bishri in G.P Sandhu Tehsil Theog Distt Shimla H.P SH C o Site devolpment Retaining wall C o Head wear Intake tank Pump House cum chaukidar Quarter Filtter Bed Sedimentation Tank Sump Well and Main Storage tank

Amount

Excavation in foundation, trenches,etc. in earth work in all kinds of soil such as pick work, jumper work,blasting work, hard blasting and chiselling etc. stacking the excavated soil not more than 3 mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinths sides of foundations etc.then disposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts.complete in all respect and to the entire satisfaction of the Engineer-in-charge.

P/L CC 1:6:12 1cement:6 sand:12 graded aggregates 40mm nominal size curing complete excluding cost of form work in foundation & plinth in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Providing and laying cement concrete 1:4:8 (1:cement:4 sand:8 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge in :-Foundation and plinth

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting , strutting and propping etc. with wooden, battens, and ballies, height of propping and centring below supporting floor to ceiling not exceeding 3 mtrs.and removal of the same for insitu reinforced concrete and plain concrete work in complete in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-charge.

Flat surfaces such as soffits of suspended floor roofs landing & like floor etc.,upto 200mm thickness.

Vertical surface such as walls(any thickness)partation and the like including attached pillasters buttresses,plinth and string courses and the like.

Edge of slab and break in floor 20 cm wide

Column.pillar & post upto floor two level square, rectangular& polygonal in plan.

Beams, cantilever Girders& lintals sides&soffits of beams, beams,haunching cantilever girders not exceeding 1mtr. Depth.

Arches exceeding 6 metres

Providing and laying cement concrete work 1:11/2:3 (1:cement:11/2 sand:3 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work in and reinforcement for reinforced concrete work Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting , strutting and propping etc. with wooden, battens, and ballies, height of propping and centring below supporting floor to ceiling not exceeding 3 mtrs.and removal of the same for insitu reinforced concrete and plain concrete work in complete in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-charge.in :-a:-Foundation and plinth.

Wall anny thickness but not less than 0.1 meter in thickness.including attached pillasters,buttresses,plinth and string courses etc.from top of foundation level upto flooor two level

c) Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings, cantilivers , girders, bressumers and lintels not exceeding 1 metre in depth.

d) Column, pillars, posts and struts

Providing mild steel / tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level. Tor steel

Providing and laying cement concrete 1:3:6 (1:cement:3 sand:6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge :-Foundation and plinth

Providing & laying CC 1:2:4 1cement:2 sand 4 graded aggregates 20mm nominal size curing complete excluding cost of form work & reinforcement for RCC work in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge in:-

In suspended floor roofs landing shalves & their support balconies,beams, girders bressumers cantilevers upto floor two level .

Boulder filling under the floor in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Supplying cast iron cover without frame for manholes for frame of 500 mm internal dia meters.C.I.cover (Medium duty ) the weight of cover to be not less than 58 kg in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Providing and placing in horizental layers filtering media duly graded,screened,washed and cleaned in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge :-

Top Layer:- Fine sand (Eff : size 0.20mm to 0.40 and Uniformity - co-efficient 2.00 to 3.00)

Second layer :- Coarse sand 3mm - 6mm.

Third Layer Bajri :- 6mm - 20mm.

Fourth Layer (20-25mm)

Layer (25-50 mm)

Bottom Layer :- Broken stone 50mm - 75mm

Prov. and laying cement concrete 1:5:10(1cement:5sand:10 graded stone agg. 40mm nominal size)with 15% plum concrete and curing complete excluding cost of form work in retaining wall/breast wall,the size of plums shall usually be 150mm to 300mm.as per HPPWD specifications within all leads and as per the direction of the Engineer-in-charge.

Half Brick masonary using common burnt clay building bricks above plinth upto floor two level in cm 1:4(1cement:4sand)conventiohal brick first class in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Pointing on brick work with cement mortor 1:3 (1cement : 3 sand) Raised and cut in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

First class brick flooring laid dry and grouted with cement motor 1:4 ( cement : 4 sand) including fixing the joints flush 10 cm. thick ( using conventional bricks) in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Providing wood work in frames of doors ,windows, clearstory, windows and other frames wrought, framed and fixed in position. in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Providing and fixing Pannelled and glazed shutters for doors windows and clear storey windows including bright finish black enamel led iron butt hinges with necessary screws 40mm thick: 2nd class deodar wood. in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

15 mm thick cement plaster on fair sides of brick/stone masonery concrete walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth in cm 1:6 (1cement:6sand) in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Providing & fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats, square or round barswith round headedbolts and nuts by screws plain grills in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

6 mm thick cement plaster in CM 1:3( 1cement 3 sand in roof slabs in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

White washing with lime on undecorated wall surfaces(two coats) to give an even shade I/c thoroughly brooming the surface to remove all dust dirt & other foreign matter in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Distempering (two coats) with oil bond distemper of approved brand and manufacture and of required shade on undecorated surfaceto give an even shade and including priming coat with distemper after throughly brushing the surface free from mortar dropping and other foreign matters in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Providing white glazed tiels 6mm thick In flooring ,treads & landing laid on a bed 12mm thick in cement plaster 1:3 (1cement:3sand) and finished with pointing in white cement in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Providing white glazed tiels 6mm thick In Skirting & riser ofsteps and dado 12mm thick in cement plaster 1:3 (1cement:3sand) and jointed with Cement slurry in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil grease & dirt and other foreigm matter in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Painting two coats(excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give even shade including cleaning all dirt, dust and other foreign matters white paint in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Providing and fixing anodized aluminium sliding door bolts withnuts and screws in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-chargeI) 300mmX16mm

Providing and fixing anodized aiuminium. tower bolts barrel type with screws etc in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge.I) 200mmX10mm

Providing and fixing anodized aluminium .handles with screws etc in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-chargeI)125mm dia

Providing plinth protection 50mm thick in cement concrete 1:3:6(1cement:3sand:6graded stone agg. 20mm nominal size) i/c finishing the top surface of concrete smooth within all leads and lifts and as directed by the Engineer-in-charge.

Laying and Jointing in trenches GMS tubes (Light grade) tube fittings such as bends,tee ,unions, elbow, nipple, ferrule etc.. as per direction and to the entire satisfaction of engineer in charge (Earth work in trenches to be measured and paid separetly) including all leads & lifts.

65 mm dia

Providing & fixing brass fullway wheel valves of 65mm dia of approved quality in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Providing & Fixing cast iron sluice valve of Leader/Bhel/ Kirloskar/Kilburn/GLED/Fouress/ make and of 125 mm dia. for comman header and capable of with standing the normal seat pressure of class ASA-300 with nut and bolts and gasket sheet carriage of material within all leads and lifts with upto date complete in all respect as per the direction of the Engineer-in-charge.

Stone filling behind the retaining wall in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Brickwork using common burnt clay building bricks in superstructure in C:M 1:6 (1 cement:6 sand) in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Cement Concrete flooring 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 40 mm thick in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

P/F Viterous China water closet squatting pan (Indian type WC pan) size 580mm, earthwork bed concrete & trap to be measured and paid for separately in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

P/F 100 mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe cement mortar 1:1 (1 cement:1 sand) in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

P/F 10 Litre PVC low level flushing cistern with a pair of CI brackets complete with fitting such as lead valveless syphon 15mm nominal size valve with polythene float, handle, union & coupling with connection with inlet-outlet & overflow pipe 40mm side slush bend including cutting holes in walls closet (overflow pipe to be measured & paid separately) etc. in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Providing and Laying No Fine Concrete 1:6 (1 cement:6 graded stone aggregate 40mm nominal size) and curing complete. A) Walls any thickness in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge

Tarsem Chand Associates

Sahi Ram Malta