GE(W)/HSR-28/2023-24 SPL REPAIR TO TOILET BLOCK/BATHROOM BLOCK OF BLDG NO P-2030 OF MILITARY HOSPITAL HISAR AT HISAR MIL STATION UNDER GE (W) HISAR

Amount

Demolition of cement concrete(unreinforced)/ lime concrete as in sunken portion / ground floor exceeding 15cm thickness including removing rubbish complete all as specified and directed.

M & L 10 mm thick rendering in CM 1:4 on faces of sunkan portion (floor and side) with smooth finishes using water proofing coumpand complete all as specified and directed.

M&L P:C:C 1:7:12 as in mass concrete using 40 mm graded brick agg as in sunken portion and other location as required complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1(using 20 mm graded crushed Stone agg) as in sunken portion /padding leveling course providing necessary slope including WPC complete all as specified and directed. Note :- WPC Shall be measured and paid seperately.

S&F in Repair PVC Floor trap 75mm bore with grating incl jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed and making good damage portion with same material of existing floor etc complete all as specified and directed.

S&F in PVC Floor trap 75mm bore with grating incl jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed.

S&F PVC in repair multi way Floor trap 75mm bore with grating incl jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed and making good damage portion with same material of existing floor etc complete all as specified and directed.

S&F PVC multi way Floor trap 75mm bore with grating incl jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed.

Dismantling cast iron work of any description complete all as specified and directed.

Taking down eaves gutter or RWP of any description complete all as specified & directed. Including fittings complete all as specified and directed.

S&F, 110mm dia PVC SWR pipe of single socketed with rubber joint, jointed with solvent joint fixed to wall complete all as specified & directed.

S&F, 110mm dia PVC bend any radius complete all as specified and directed.

S&F , 110mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F , 75mm dia PVC (SWR) junction double, (Single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) pipes75 MM bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 110 MM bore single socketed in any length with rubber ring joints laid in floor/trenches Completed all as directed. Including necessary demolition of pcc/rcc and excavation of soft/loose soil in trenches. refilling the soil after laid pipe in trenches and making good surface complete all as specified and directed.

S&F PVC (SWR) pipes75 MM bore single socketed in any length with rubber ring joints laid in floor/trenches complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore with/without access door any radius complete all as directed.

S&F PVC (SWR) bends 75mm bore with/without access door any radius complete all as directed.

S&F PVC (SWR) single junction 'T' 75 mm bore with access door any radius complete all as directed.

S&F PVC (SWR) single junction 'T' 110 mm bore with access door any radius complete all as directed.

Taking up or down 15mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down for 20mm bore steel water tubing galvanised with connection complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain 20mm outer dia CPVC SDR 11 fittings in wall/ceiling complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain 25 mm outer dia CPVC SDR 11 fittings in wall/ceiling complete all as specified and directed.

Supplying and laying of 16 mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors complete all as specified and directed

S&F Brass Elbow for special fitting of 16 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Elbow for special fitting of 20 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Elbow for special fitting of 25 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 16 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 20 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 25 mm outer bore CPVC pipe complete all as specified and directed.

S&F Male Brass threaded Adaptor Tee for special fitting of 16 mm outer bore CPVC pipe complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified.

M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & fixed in neat cement slurry and tile joint mimimum 3mm specing and filling with Epoxy complete all specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick, joint free (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, over and including 15mm thick screed in CM (1:4) set and fixed in neat cement slurry and tile joint mimimum 3mm specing and filling with Epoxy complete all specified and directed.

Supply only water proofing compound complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding and flush pipe)and WC Connector with leaping ring connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor complete all as specified and directed.

S&F in repair, PVC L/L cistern 10 lir capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete including complete all as specified and directed.

S&F in repair Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe and 15mm pillar tap cast copper alloy with capstan head chromium plated complete fixed in repair complete all as specified and directed.

S&F in Repair Vitreous China urinals, half stall type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automaticflushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Supply& fixing of 32mm bore Waste coupling of PTMT(half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms suitable for urinal complete all as specified and directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ® 15mm chromium plated cast copper alloy bib taps fixed in repair complete all as specified and directed..

S&F in repair fancy type chromium plated Angle valves, cast copper alloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified and directed..

S&F in repairs Brass CP three way wall mixer hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. Series mist Cat No : 8575 Prayag or equivalent

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

Dismantling water tanks , open or closed, in position and removing to store of capacity exc 500 ltr but n.exc 1000 ltr complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (tripple layer White in colourcylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes i.e. nipple socket / unions etc fixed in repairs complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore fixed in repairs complete all as specified and directed.

S&F Grating round 140 mm size of PTMT with hole or without hole fixed in repair complete all as specified and directed.

S&F in repair 15mm dia/bore CP central hole basin mixer long shank fixed to iron pipe complete all as specified and as directed. Series mist cat No : 8550 Prayag or equivalent

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete all as specified and directed.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement complete all as specified and directed..

All as above item No 54.00 but in CM 1:4 including WPC complete all as specified and directed.

M&L, 10mm thick rendering in CM 1:3 to brick/conc ceiling surfaces trowelled to even & smooth without using extra cement complete all as specified and directed.

M & L two coat of oil bound distemper on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L one coat of oil bound distemper on old or new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L two coat of cement base paint on new surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L of three coat of white wash on newly plastered surface as on ceiling including preparation complete all as specified and directed.

M&L of three coat of white wash on old plastered surface as on celing including preparation complete all as specified and directed.

M & L one coat of cement base paint on old or new surfaces of walls including preparation of surfaces completeall as specified and directed.

M&L Salt-glazed stoneware gully traps, size 180mmx150mm square or round mouthed, tvpe 'P' including demolition/disamantling of existing gully trap and remove from site complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe , internal dian of pipe is 150mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

Ditto, items 64.00 but for removing existing branch drain, making good to walling and rendering, cutting out branch channel, and making good benchings complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

S&F 100mm dia PVC (SWR) vent cowl complete all as specified and directed.

Dismantling 75 mm dia and over and upto 150mm dia , cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

M&L for plain Cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation ,filling and mass concrete complete all as specified and directed.

M&L for Plain Cement concrete type B-1 using 20mm graded stone agregates as in surface channels and drains etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

Providing, cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate as inin lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed ® kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including old tiles/stone slab/ etc complete all as specified and directed.

Demolition of RCC in floors (other than ground floors), beams staircases, landing, chajjas, slab and similar suspended work, including removing out of MD Land complete all as specified and directed. Note : Demolition work is to be carried out in portion of building hence necessary scaffolding and safety measurs required to support adjucent portions of bldg are deemed to be included in quoted rates.

M&L RCC M-25 (Design mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed..

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia complete all as specified and directed..

All as per item above but 6 to 8mm dia complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.

S&F in Repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in Repair Towel Rail 600mm long of PTMT fixed and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms)

Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigments in floor complete all as specified over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M & L for 50mm thick cement concrete type B – 1 (1:2:4) using 20mm graded stone aggregate as in Floor/path and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Providing 30mm thick factory made 100% solid WPC (Wood polymer composite) Solid Plain/Prelam/Enrouted Plain/Enrouted Painted flush Door Shutter of required size comprising of Virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium carbonate and natural fibers (Wood Powders/rice husk/Wheat husk) and Non toxic additives made from Extrusion process WPC foam sheet single Extruded (Inner) with density not less than 650 Kg/cbm manufacture by an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw withdrawl strength of 2000 N (face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread flame of Class A category with Property of being Termite/Borer Free, Water/Moisture Proof, Fire Retardant and fixing with Stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. For WC/Bathroom/Toilet/Kitchen/Balcony Doors complete all as specified and directed.

Providing and Fixing factory made 100% Solid WPC (Wood Polymer Composite)- Door frame of size 75mmx50mm made from wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium carbonate and Natural Fibers (Wood Powder/Rice Husk/Wheat Husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & Screwed with full body threaded star headed screws having minimum frame density of 780 Kg /cbm manufacture by an ISO 9001-2015 certified Company, having good screw holding capacity (Screw withdrawal strength of (Min 990N), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/Moisture Proof & Fire retardant & Fixed in position with SS Draft Fasteners/Hold Fast of required dia and length for WC/Bathroom/Toilet and external uses complete all as specified and directed

S&F steel Window/ventilator with top hung shutter of glazed & gauged including hinges,tower bolt steel peg stay complete with glazing bars including one shop coat of redoxide primer complete all as specified and directed.

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and directed

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars dovetailed or welded complete all as specified and directed

S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.

S & F in repair GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters including necessay arrangements like welding etc complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed.

S&F in repair aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size complete all as specified and directed.

S&F in repair aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size complete all as specified and directed.

S/F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long complete all as specified and directed.

S/F in repair Extruded aluminium alloy handles, fabricated type, anodised 125 mm long for cup boards and PVC doors complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated types, anodised, size 150 mm complete all as specified and directed.

S&F in repair extruded aluminium alloy handles fabricated types, anodised, size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed

S&F in repair extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S & F MS butt hinges medium weight stainless steel 100mm long complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed

S&F 3 mm thick figured glass pin head type in square n.exc 0.5 sqm each pane complete all as specified and directed.

S&F sheet glass 4.8 mm thick ordinary quality in squares n exc 0.5 sq m each pane complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.

M & L for preparations of old or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint to wooden surfaces complete all as specified and directed.

Renewing Glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds with 15mm thick CM (1:6) and laying or setting, jointing neat cement slurry and pointing with colour/white cement to matching clour of new or old tiles complete all as specified and directed

Supply only Glazed ceramic non skid/Vitrified tiles of any size and patteren complete all as specified and directed.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on old surface including complete removal of existing treatment complete all as specified and directed.

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

S&F in repair rubber beading to aluminium door / window / aluminium frame and like of best quality complete all as specified and directed.

M&L taking down Aluminium door & refixing the same after necessary adjustments and repair including providing necessary beading complete all as specified and directed. Note : Defective parts will be replaced and measured seperately in relevant item.

S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified and directed.

S&F framed work such as grills, grating etc with ends of bar shouldered and/or forged into spikes, framed guard bars etc confirming to Fe-290, Gde-E-165, complete all as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment complete all as specified and directed.

All as per item No 124.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

All as per item No 124.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on indep board complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts complete all as specified and directed.

S&F Modular switch 1 way 16A 1 module complete all as specified and directed.

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

S&F i Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing MCBs SP 6 to 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Taking down old U/S submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

M/s Rao Constructions, 1173 Urban Estate-II, Hisar

Siya constructions