REPAIR TO OTM ACCN THROUGH DAY TO DAY COMPLAINTS OF BR AND EM NATURE UNDER AGE BR P -1 AND AGE E M AT FARIDKOT MIL STN

Amount

Taking down 15mm dia bib cock/stop cock of any pattern / type and re-fixing the same after minor repairs such as replacement of washers/jumper brass etc complete all as specified and directed. Note : Any major parts such as spindles / caps etc to be measured as supply only and paid for separately.

Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair 15mm bore stop valve of PTMT, any colour, screwed both ends for GI outlet/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed.

S&F in repair 15mm bore stop valve, cast copper alloy ,screwed down, high pressure with crutch or butterfly handle, screwed both ends for GI outlet/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed.

S&F in repair 15mm bore stop valve, cast copper alloy, chromium plated ,screwed down, high pressure with crutch or butterfly handle, screwed both ends for GI outlet/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed.

All as per Srl item No. 06 here-in-before but chromium plated with long shank and cup (concealed type) complete all as specified & directed.

S&F in repair 20mm bore stop valve, cast copper alloy ,screwed down, high pressure with crutch or butterfly handle, screwed both ends for GI outlet/inlet pipe or for union complete all as specified and directed.

S&F in repair bib tap 15mm of PTMT, screwed down for iron pipe and fixed complete all as specified and directed .

S&F in repair 15mm bore bib tap with long shank, chromium plated,cast copper alloy with crutch or butterfly handle, screwed down of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore bib tap, chromium plated,cast copper alloy with crutch or butterfly handle, screwed down of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair pillar taps,fancy type,chromium plated ,cast copper alloy, with capstan head, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed

S&F in repair 15 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed in position complete all as specified and directed .

S&F in repair 20 mm bore PTMT ball valve (float valve), high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified and directed.

S&F in repair 25 mm bore PTMT ball valve (float valve), high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position including all necessary fittings complete all as specified and directed.

S&F in repair 15mm bore angle valve of PTMT, any colour, high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC waste pipe, 32 to 40 mm for WHB/Sink /urinal up to floor trap and fixed complete all as specified and directed.

S&F in repair stainless steel grating of any size (as per existing) with or without waste hole complete all as specified & directed.

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut , screwed for 20mm bore iron pipe complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut , screwed for 20mm bore iron pipe complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 2000 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut , screwed for 20mm bore iron pipe complete all as specified and directed.

Disconnecting existing tanks of capacity upto 500 ltrs, setting aside (or lowering if required) for repairs etc and hoisting if required, including cleaning and removing all scale and dirt ,etc from the the tank & from the mouths of circulating pipes etc,reconnecting and re-fixing in position complete all as specified and directed.

Disconnecting existing tanks of capacity exc 500 ltrs but not exc 1000 ltrs, setting aside (or lowering if required) for repairs etc and hoisting if required, including cleaning and removing all scale and dirt ,etc from the the tank & from the mouths of circulating pipes etc,reconnecting and re-fixing in position complete all as specified and directed.

S&F in repair covers for PVC overhead water tanks of any capacity (as per sample) complete all as specified and directed.

S&F in repair vitreous china Wash hand basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, pillar taps,fancy type,chromium plated ,cast copper alloy, with capstan head, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore and PVC connection 15mm size, 450mm long with PTMT nut and other end fixed complete all as specified and directed.

Taking up or down 15mm bore steel water tubing alongwith connections in any situation complete all as specified and directed .

Taking up or down 20mm bore steel water tubing alongwith connections in any situation complete all as specified and directed .

Taking up or down 25mm bore steel water tubing alongwith connections in any situation complete all as specified and directed .

M&L for Steel water tubing of 15 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed

All as per Srl item No. 29 here-in-before but except pipe

M&L for Steel water tubing of 20 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed

All as per Srl item No. 31 here-in-before but except pipe

M&L for Steel water tubing of 25 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed

All as per Srl item No. 33 here-in-before but except pipe

S&F in repair swivel shower of PTMT, of any colour for fixing with 15mm pipe, (minimum weight 40 grams) complete all as specified & directed.

S& F in repair shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour including fixing to steel pipe complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.

S&F in repair brass chromium plated mixer for mixing hot and cold, water screwed down for iron pipe complete all as specified and directed .

S&F in repair PVC Syphon (as per sample) for PVC low level flushing cistern of capacity 10 ltr omplete all as specified and directed .

Dismantling CI/PVC pipe of 75/100mm dia alongwith fittings ,below or above GL/laid in floors/fixed to walls jointed in cement mortar complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes ,single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, 75 mm dia, plain with stainless steel grating including jointing with solvent cement complete all as specified and directed

S&F in repair PVC (SWR) 'P' trap of 110mm bore complete all as specified and directed

S&F in repair vitreous China squatting pan 'Orissa pattern', size 580mm x 440mm white / coloured, with integral foot rest including flush pipe and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floors complete.all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestel pattern/EWC/long pan) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover,white in colour with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed.

S&F in repair PVC low level flushing cistern, white, 10 litre capacity, valveless syphonic action type with float, handle including bracket & connection to pipe complete all as specified and directed .

S&F in repair PVC Knob/Handle (as per sample) suitable for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.

S&F in repair vitreous china bowl urinal ,flat back of size 465x355x265mm , white,with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar, including connections to flushing pipe and outgoing pipes,32mm boe flush pipe & half turn valve 15mm bore complete all as specified & directed .

S&F in repair chromium plated Jet spray with 1.50 m long flexible tube and fixed complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connectios and fixed in position complete all as specified and directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified and directed.

S&F in repair flush pipe of polythene of low or high density or PVC, 32mm dia, for low level flushing cistern and fixed complete all as specified and directed.

S&F in repair waste fittings 32 mm /40mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair sinks with drainage board, made of 1mm thick stainless steel,overall size of sink 915mm x 460mm with bowl size 410mm x 330mm x 160mm, plugs, washers, waste pipe, union, waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed

S&F in repairs Toilet paper Holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

Taking down wooden shutters of any description exc 1 sqm and n. exc 2 sqm each and refixing in the same opening after easing, adjusting and also refixing of builders hardware as required including renewal of unserviceable screws etc complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tined tacks or galvanized wire staples or wooden bead complete all as specified and directed.

S&F in repair 100mm long mild steel butt hinges, medium weight, cold rolled (ISI marked) fixed with screws complete all as specified and directed.

S&F in repair Butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 (ISI marked) fixed with screws complete all as specified and directed.

S&F in repair brass mortice lock, vertical type, size 100 mm, 2 levers complete all as specified and directed.

S&F in repair 250 mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified & directed.

Taking down existing aluminium frame shutters of any description exc 1 sqm and n. exc 2 sqm each and refixing in the same opening after making necessary repair etc to make the door functional complete all as specified and directed.

S&F in repair 150mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodized with hard drawn steel spring,fixed in floor complete all as specified and directed.

S&F in repair door closer hydraulically regulated, Aluminium (Diecast body), designation No 3, universal type suitable for door shutter 1000mm to 1200mm width and weight between 61 to 80 kg complete all as specified and directed.

S&F in repair door closer hydraulically regulated, Aluminium (Diecast body), designation No 2, universal type suitable for door shutter 700mm to 850mm width and weight between 36 to 60 kg complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made out of mild steel heavy duty & fixed complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed complete all as specified

M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 3 mm thick, frosted sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 4.8 mm thick, plain sheet glass, ordinary quality and glazing with rubber beading (supplied alongwith shutters) in squares exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for Securing glass of any description in existing metal frame glazed with putty / beads including removing loose or decayed putty / beads, painting / oiling one coat on rebates, grooves, reputtying and painting / oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.

S&F in repair PTMT cabinet with mirror of size 622x422mm complete all as specified & directed. Make : Prayag Cat No. 555 or equivalent make as given in PS

Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed

Taking down shutter of any description exc 1 sqm but n.exc 2sqm each complete all as specified and directed

S&F Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and one coat of red oxide primer complete all as specified and directed.

S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and one coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:3:6, type C0 (using 12.5mm graded crushed stone aggregates) as in back filling of pressed steel frames, bed blocks for fixing of hold fasts etc including necessary formwork complete all as specified and directed

S & F Solid PVC door frame of size 50x47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain /coloured PVC ‘C’ channel having a PVC strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top, bottom & back rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to styles complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood, plain, framed, panelled shutters (two number of panels) with panels of timber flat on both sides (feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face veneers fitted to chowkats complete all as specified and directed

S&F 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed

M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .

S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .

S&F aluminium anodised barrel tower bolts,150 mm long of extruded section, fixed to doors with screws complete all as specified and directed .

S&F Aluminium anodised, fabricated type, handle 125 mm size complete all as specified and directed.

S&F 100mm mild steel butt hinges, medium weight,cold rolled complete all as specified and directed.

S&F factory made box type steel window with side hung shutters including pintol hinges with steel handle and 2 Nos 150mm long mild steel tower bolt in each shutter,fixing lugs,peg steel stay etc complete with glazing bars dovetailed or welded including one coat of red oxide primer complete all as specified & directed.

S&F factory made box type steel window with side hung shutters including pintol hinges with steel handle and 2 Nos 150mm long mild steel tower bolt in each shutter,fixing lugs,peg steel stay etc complete without glazing bars dovetailed or welded including one coat of red oxide primer complete all as specified & directed.

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed

S&F in repair Mild Steel powder coated Decorative drapery rod (colour as approved) of 20 mm dia , approved pattern and design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed .

Dismantling Wall and ceiling boards (fibre,pulp, insulation) or insulation boards/slabs/blankets, any thickness, including cover fillets etc complete all as specified & directed.

S&F gypsum board 7mm thick in ceiling fixed with screw as per manufacturer's instructions, plain / coloured fixed on steel snap grid (Powder coated bottom side) with 'T' and 'L' (26mm x 24mm x 1mm thick) size of grid 600mm x 600mm placed in ceiling 'L' section fixed with wall using PVC rawl plugs and steel screws @ 600mm centre to centre and suspended / provided 14 gauge (2mm) dia galvanised bars not less than 1.00 Sqm hanging arrangements and level including adjustable clips all as specified and directed and as specified in clause 10.38 of MES Sechudle Part-I complete all as specified and directed. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of ceiling

S&F PVC hollow wall lining interlocking type of 7mm thick plain/coloured /wood grain fitted in to the wall with PVC rawl plug and steel screws including fillets on joints as per manufacturer's instruction etc.complete all as specified and directed. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall

S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet having beading/border on top and on joints inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings all as specified and directed by Engineer-in-Charge Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall

S&F 5mm thick PVC Sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified and directed .

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed .

M&L for providing precast cement concrete 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) as in louvers and jallies in between pillars, 40mm thick (measured solid) including all moulding but excluding frame and set in cement mortar 1:4 complete all as specified and directed.

M&L for demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed .

M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 10mm thick in cement mortar 1:6 on brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rough cast plaster over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surface complete all as specified and directed . Note : The rough cast mixture shall consist of crushed stone / fine gravel aggregate, coarse sand & cement in the ratio of 1:1:1 over the rendering coat.

M&L for rendering 10 mm thick in cement mortar 1:4 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of newly rough cast plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening complete all as specified and directed.

M&L for Preparation of new surfaces plastered of walls and applying two coats of white wash on wall complete all as specified and directed.

M&L for Preparation of new surfaces plastered of ceiling and applying two coats of white wash on wall complete all as specified and directed.

Dismantling floor,hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed.

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed

M&L for Coloured glazed ceramic tile 450x300x7 mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Coloured glazed ceramic tile 300x200x7 mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed

M&L for Vitrified ceramic tiles, light shade, 8 to 9 mm thick (square/ rectangular), polished,area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed

S&F granite 20mm thick work (table rubbed and polished) as in cooking platforms,steps,jambs and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for marble work 18mm to 20mm thick of any shade (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointed in white cement (1:2) using marble dust with admixture of pigment to match the shade of the marble over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed

M&L for 25mm thick, PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregates), as in sub base of flooring ,finishing surfaces even and fair without using extra cement complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping,bed blocks and similar works including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.

M&L for sand filling under floor with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed

M&L for Machine pressed Precast cement concrete interlocking coloured paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed .

All as per Ser item No 131 here-in-before but except paver blocks

S&F EWC vitreous china, twin action, one piece wash down water closet pan with Soft Close Duroplast Seat Cover coloured complete all as specified and directed

S&F 18/19mm thick, prelaminated particle board,interior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work in any position complete all as specified and directed .

M&L for repairing aluminium door by taking out frame alongwith shutter, fixing missing screw to wall, adjusting floor spring, repairing hook joints of frame and re-erecting in good working condition by necessary lubrication complete all as specified and directed.

Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells & making good the disturbed surfaces of walls, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.

Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLS with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc in the existing concealed conduit with new provision of 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc, covered with 2.8mm thick plastic laminate Hylem / Anchor top cover sheet of required colour, fixed with brass screws and cup washers, painting terminal boxes inside and outside with one coat of red oxide primer including continuous earth wire of size 1.5 Sqmm PVC stranded copper conductor unsheathed, insulated, stranded (Green colour) connected to common earth point dolly for for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed .

All as per Ser item No 137 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on same board with other switches complete all as specified and directed .

All as per Ser item No 137 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on independent board complete all as specified and directed .

All as per Srl item No. 137 here-in-before but for one ligh point controlled by two,two way switches complete all as specified and directed

All as per Srl item No. 137 here-in-before for Switch socket combination (multi purpose) 6 Pin 15 Amps 230 volts point to be controlled by one switch and wiring with 2.5 Sqmm FRLS PVC unsheathed copper conductor and FRLS cable 2.5 Sqmm PVC insulated earth wire on independent board.complete all as specified and directed

S&F PVC Lamp holder with back plate suitable for batten fittings complete all as specified and directed .

S&F complete set of tube light fitting, 1x20 watt LED (4 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F complete set of tube light fitting, 1x10 watt LED (2 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F ceiling rose, three terminals, PVC polycarbonate, isolated body with bakalite 20mm back plate complete all as specified and directed .

S&F in repair Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 10 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 10 Sqmm for continous earth wire drawn into existing PVC concealed conduit complete all as specified and directed . Note :- Two runs of 10 Sqmm copper cable and one run of 10 sqmm copper wire earth continuty conductor shall be measured as one length)

S&F in repair Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 6 Sqmm for continous earth wire drawn into existing PVC concealed conduit complete all as specified and directed . Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor shall be measured as one length)

S&F switch piano, flush type, single pole, one way, 5 /6 Amp,230 V,AC supply complete all as specified and directed .

S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230 volts AC supply complete all as specified and directed.

S&F Piano type switch, single pole, 2 way, 5/6 amps, 230 volt, AC supply complete all as specified and directed

S&F socket outlet, two in one, 5 Pin 5 Amps, 230 Volt, AC supply, complete all as specified and directed

S&F socket outlet ,2 in 1, 5/6 pin, 15/16 Amps, 230 volts ,AC supply complete all as specified & directed.

S&F bell push, flush type, 5 amps complete all as specified and directed

S&F Bell, ding dong, AC 230V, single pole complete all as specified and directed

S&F in repair Sheet metal enclosure for DBs,SPN, double door, 230 Volts,8 ways with 200 amps rated bus bar complete all as specified and directed .

S&F in repair MCCB, 4 Pole,fixed type ,415 V, 100 Amps with breaking capacity 16 KA including making good the disturbed surfaces complete all as specified and directed.

S&F in repair MCB SP 5 to 32 Amp, 240 volts, B Curve with breaking capacity 10 KA complete all as specified and directed

S&F in repair MCB SP 40 Amp, 240 volts, B Curve with breaking capacity 10 KA complete all as specified and directed

S&F in repair MCB SPN 40 to 63 Amp, 240 volts, C Series with breaking capacity 10 KA complete all as specified and directed

S&F in replacement Sheet Metal single pole and neutral Enclosures with a two pin and earth plug and socket with MCB SP 20 Amps suitable for working on 240 volts AC complete all as specified & directed.

S&F in repair stepped type electronic fan regulator, flush type on the existing pheonolic laminated sheet etc, single phase, AC supply, 230 V and connecting up complete all as specified and directed. .

S&F in replacement Modular switch 1 way 16 amps, 1 module complete all as specified and directed.

S&F in replacement Modular socket 6A /16A - 2/3 pin combined, 2 module complete all as specified and directed.

S&F in replacement Modular switch 1 way 6 amps, one module complete all as specified and directed.

S&F in replacement Modular switch 2 way 6 amps, two module complete all as specified and directed.

S&F in replacement Modular bell push 6 amps, one module complete all as specified and directed.

S&F in replacement Modular socket 6A -2/3 pin combined, 2 module complete all as specified and directed.

S&F in replacement modular metal flush box 1/2/3 modules including making good to disturbed area duly matching the colour with existing surface complete all as specified and directed.

S&F in replacement modular metal flush box 4 modules including making good to disturbed area duly matching the colour with existing surface complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 1 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 2 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 3 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 4 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 6 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 8 module complete all as specified and directed.

S&F in replacement of condenser 2.5/3.15 Mfd AC 240V, complete all as specified and directed.

S&F in replacement PVC non metallic rigid conduit, 25 mm external dia (medium grade) ISI marked exclusive of boxes but inclusive of all tees, bends, reducer, bell mouth tube ends and fixing accessories, concealed including cutting chases in wall, floor and making good all disturbed surfaces matching with existing surfaces complete all as specified and directed.

S&F in replacement hylam sheet suitable size with cutting slot for mounting of switches,sockets,fan regulators including nuts,washer,thimble etc with 3mm thick plastic laminated sheet cover and making good all disturbed surfaces matching with existing surfaces complete all as specified and directed.

S&F in repair 1X10 watt LED retrofit type bulk head fitting luminaries, die cast, aluminium alloy body, heat resistant, prismatic glass cover with specially designed gasket, lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 HZ complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, buried directly in ground vertically (depth of pit not less than 2.25m below normal ground level), with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to electrical equipment/GOD/LA and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI medium grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of precast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Schedule Part-I (2009), complete all as specified and directed. Note(s):- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with TMT bar 8mm dia both ways @100c/c. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt. (v) Quoted lump sum / rate shall be inclusive of above all provisions.

S&F in replacement of MS sunken box 1.6mm thick galvanised steel pressed sunken terminal boxes of size 75mmx75mm and 60 mm deep with 3mm thick plastic laminated sheet cover , painted on both sides inside and outside with one coat of red oxide primer for mounting of switches sockets, fan regulators, etc. including making good to the disturbed surfaces of walls with matching the colour with existing surfaces complete all as specified & directed.

S&F in replacement of MS sunken box 1.6mm thick galvanised steel pressed sunken terminal boxes of size 100mmx100mm and 60 mm deep with 3mm thick plastic laminated sheet cover , painted on both sides inside and outside with one coat of red oxide primer for mounting of switches sockets, fan regulators, etc. including making good to the disturbed surfaces of walls with matching the colour with existing surfaces complete all as specified & directed.

S&F in replacement of MS sunken box 1.6mm thick galvanised steel pressed sunken terminal boxes of size 150mmx75mm and 60 mm deep with 3mm thick plastic laminated sheet cover , painted on both sides inside and outside with one coat of red oxide primer for mounting of switches sockets, fan regulators, etc. including making good to the disturbed surfaces of walls with matching the colour with existing surfaces complete all as specified & directed.

S&F in replacement of MS sunken box 1.6mm thick galvanised steel pressed sunken terminal boxes of size 150mmx150mm and 60 mm deep with 3mm thick plastic laminated sheet cover , painted on both sides inside and outside with one coat of red oxide primer for mounting of switches sockets, fan regulators, etc. including making good to the disturbed surfaces of walls with matching the colour with existing surfaces complete all as specified & directed.

Supply and fixing LED luminaire 600 mm x 600mm, 35/36 watt, 220 V,AC, Recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed with following specification :- (a) Lumen efficiency of luminaire should be more than 100 Lumen per watt. (b) Voltage operating range : 140 to 270 volts. (c) Temp operating range : Minus 10º C to Plus 50º C. (d) Power factor : Minimum 0.95. (e) THD : Max 10%. (f) IP rating : IP20.(g) CRCA pre coated housing. (h) LED driver of the make as of the luminaire,(j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Inbuilt Surge protection device for 4 KV.

S&F in repair energy efficient LED Security light fitting of 25W, pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/ roadway luminaire, with driver including electric connection, complete fitting with all accessories on and including bracket of 40mm dia,light grade ,GI pipe ,1.20 m and connecting with twin core twisted flexible copper conductor cable 1.5 Sqmm and with following specifications complete all as specified and directed :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max15%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Morethan 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12Hrs

S&F in replacement LED post top lantern of 9 watt with lamp & driver, IP 65, fitted on minimum 1 meter coloured metallic pipe including PCC work complete all as specified and directed

Supply, laying, jointing and testing of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 6 Sqmm, 2 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete including taking out old cable & bricks all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling,watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed .

Removal of surplus excavated soil to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed.

M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed. Note :- A Sum of Rs. 1,18,072.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 35 & 36 (Schedule of credit) of Tender Documents.

NEW AMRITSAR CONSTRUCTION COMPANY

SHIV SHAKTI BUILDERS

BANSAL BUILDERS