Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹12.1 LAccepted-Finance | 1 | Accepted-Finance L1 | |
| 2 | 2₹12.9 L+₹79,755.65 (6.61%)Accepted-Finance | 2 | Accepted-Finance L2 |
Tender Value
₹12.2 L
EMD Value
₹24,462
Closing Date
16 Nov 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, PBND, APWD, Port Blair
EE, PBND, APWD, Port Blair
Face Lifting of stage and other facilities for Amphitheatre at Anarkali for organizing Island Tourism Festival 2022 under PBND, APWD, Port Blair
2023_APWD_12119_1
NIT No. 95/EE/PBND/2022-23
Open Tender
Civil Works - Others
Item Rate
30 days
Port Blair
Please refer tender documents
4 documents required · 4 mandatory
₹0
₹24,462
20 Nov 2023
28 Oct 2023
17 Nov 2023
28 Oct 2023
16 Nov 2023
30 Oct 2023
30 Oct 2023 - 8 Nov 2023
Amount
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
Providing and fixing to existing door frames.
30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats.The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
Applying priming coat:
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
Two coats
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
One or more coats on old work
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :
One or more coats on old work
Finishing walls with Acrylic Smooth exterior paint of required shade :
Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
With cement mortar 1:4 (1cement: 4 coarse sand)
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Fencing with angle iron post placed at required distance embeddedin cement concrete blocks, every 15th post, last but one end postand corner post shall be strutted on both sides and end post on oneside only and provided with horizontal lines and two diagonalsinterwoven with horizontal wires, of barbed wire weighing 9.38 kg per100 m (minimum), between the two posts fitted and fixed with G.I.staples, turn buckles etc. complete. (Cost of posts, struts, earthwork and concrete work to be paid for separately). Payment to bemade per metre cost of total length of barbed wire used.
With G.I. barbed wire
Supplying at site Angle iron post & strut of required size includingbottom to be split and bent at right angle in opposite direction for 10cm length and drilling holes upto 10 mm dia. etc. complete.
Surface dressing on old surface with hot bitumen of grade VG - 10 ofapproved quality using 1.95 kg of bitumen per sqm with 1.50 cum ofstone chippings 11.2 mm nominal size per 100 sqm of road surface,including consolidation with road roller of 6 to 8 tonne capacity, etc. complete.
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 40 mm nominal size) in pavements, laid to required slopeand camber in panels as required including consolidation finishingand tamping complete.
Painting road surface marking with adequate nos of coats to giveuniform finish with ready mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade, including cleaningthe surface of all dirt, scales, oil, grease and foreign material etc. complete.
Old work (One or more coats)
Excavating holes upto 0.10 cum, including getting out the excavatedsoil, then returning the soil as deported in layers not exceeding 20cm in depth, including consolidating and deposited layer by rammingwatering etc., disposing of surplus excavated soil as directed with ina lead of 50 mm and lift upto 1.5 m.
All kind of soil
Erecting arch type welcome gate with wooden inner structure covered by 6mm thick marine plywood panelling at the entrance of Amphitheatre. Frame work 0.60 m and 0.30 m wide arch type having height of 5 mtr from ground with frame work is 3"x2" main frame & 2"x1"superior hard wood Cat-II(B) 60 cm c/c intermediate bracing cladding with 6mm thick marine plywood including painting and white washing the structure with decorative type painting etc complete as per the direction of Engineer-in-charge.(materials shall be taken back by the agency by removing, dismantling after completion of function)
Providing and fixing cotton cloth lining for false ceiling, walling and covering the decking of wooden flooring etc complete as per the direction of Engineer-in-charge (only cost of labour charges for errection, dismantling and removal including cost towards wastage of materials, nails and T&P etc)
With white cotton cloth
Providing wood work in posts, trusses, frames of false ceiling partition and other frames with superior hardwood cat-II sawn and fixed in position excluding the cost of timber etc. complete as per the direction of Engineer-in charge (only cost of labour charges for errection, dismantling and removal including cost towards wastage of materials, nails and T&P etc)
Providing and fixing eaves or facia board with 12"x1" (0.30X0.025 mtr) plan of superior hardwood cat-II (B) including nailing etc complete as per the direction of Engineer-in-charge (only cost of labour charges for errection, dismantling and removal including cost towards wastage of materials, nails and T&P etc)
Providing and fixing 6mm thick marine plywood (Greenply or equivalent confirming to IS:710) on existing frames with necessary nails etc complete as per the direction of Engineer-in-charge (only cost of labour charges for errection, dismantling and removal including cost towards wastage of materials, nails and T&P etc)
Providing and fixing in walling/partition with 12mm thick WPC/PVC board over existing frames with necessary screws, nails etc complete as per the direction of Engineer-in-charge.
Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. or equivalent (size, shape and pitch of corrugation as approved by Engineer-In- charge) 0.50mm (+0.50%) total coated thickness with aluminium zinc coating 150 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns, sheet should have protective guard film of 25 micron minium to avoid scratches during transportation and should be supplied in single length up to 12 metres or as desired by Engineer-In-Charge. The sheet shall be fixed using self drilling/ self tapping aluminium screws (Xylan) of size (5.5X55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (materials shall be taken back by the agency by removing, dismantling after completion of function)
N V JOHN
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .