Repairs to damaged bathrooms tiles, doors, sanitary fittings, termite treatment, inner brightening to officers quarters in Rostrevor garden Teynampet.

Item Breakup - A-List of items of work that are covered under Delhi Schedule of Rates 2021

thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 10.0 STEEL WORK CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY Providing & fixing glass panes with putty and 10.30 glazing clips in steel doors, windows, clerestory windows, all complete with : 10.30.2 5.5 mm thick glass panes (weight not less than Sqm 27 1243.5 33574.5 20 12.50 kg/sqm) 11.0 FLOORING 11.37S CERAMIC GLAZED TILES 11.39 Providing and laying rectified Glazed Ceramic Sqm 50 1142.8 57140 floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red 21 Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41S VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement 11.41A slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.2 Glazed vitrified floor tiles polished finish of size 22 11.41A.2.1 Size of Tile 600 x 600 mm Sqm 90 1359.2 122328 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 23 13.1.1 1:4 (1 cement: 4 fine sand) Sqm 50 294.85 14742.5 Applying one coat of water thinnable cement 13.43 primer of approved brand and manufacture on wall surface : 24 13.43.1 Water thinnable cement primer Sqm 2400 64.45 154680 13.80 Providing and applying white cement based putty Sqm 1000 123.85 123850 of average thickness 1 mm, of approved brand 25 and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Applying priming coats with primer of approved 13.85 brand and manufacture, having low VOC (Volatile Organic Compound ) content. Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 13.90 grams/ litre of approved brand and manufacture to give an even shade : 26 13.90.1 Old work (one or more coats) Sqm 990 56.8 56232 13.91 Removing dry or oil bound distemper, water Sqm 2000 20.85 41700 proofing cement paint and the like by scrapping, 27 sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Wall painting with plastic emulsion paint of 13.98 approved brand and manufacture to give an even shade: 28 13.98.1 One or more coats on old work Sqm 2400 90.85 218040 CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY Painting with synthetic enamel paint of approved 13.99 brand and manufacture of required colour to give an even shade : 29 13.99.1 One or more coats on old work Sqm 996 86.55 86203.8 Varnishing with varnish of approved brand and 13.113 manufacture: 30 13.113.1 One or more coats with copal varnish Sqm 996 79.45 79132.2 14.0 REPAIRS TO BUILDING 14.26S WOOD WORK Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed 14.28 with brass screws and wooden plugs etc. wherever necessary complete. 31 14.28.1 20 mm diameter. Metre 200 295.2 59040 14.75AS ROUTINE MAINTENANCE WORK 14.82 Dismantling W. C . Pan of all sizes including Each 15 110.7 1660.5 32 disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. 15.0 DISMANTLING AND DEMOLISHING Demolishing brick work manually/ by mechanical means including stacking of serviceable material 15.7 and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. 33 15.7.4 In cement mortar cum 4.5 1698.45 7643.03 Dismantling tile work in floors and roofs laid in 15.23 cement mortar including stacking material within 50 metres lead. 34 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 320 60.5 19360 15.52 Dismantling of flushing cistern of all types Each 15 744.6 11169 (C.I./PVC/Vitrious China) including stacking of 35 useful materials near the site and disposal of unserviceable materials within 50 metres lead. 17.0 SANITARY INSTALLATIONS Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.2 manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat Each 10 5540.55 55405.5 36 and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass 17.7 waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.4 White Vitreous China Flat back wash basin size Each 15 1679.6 25194 37 550x 400 mm with single 15 mm C.P. brass pillar tap Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. 17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 38 17.10.1.2 510x1040 mm bowl depth 225 mm Each 5 6677.4 33387 17.22B Providing and fixing CP Brass Single lever Each 10 6119.15 61191.5 telephonic wall mixer of quality & make as 39 approved by Engineer in charge. (a) 15 mm nominal dia CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY 17.31 Providing and fixing 600x450 mm beveled edge Each 15 1411.15 21167.25 mirror of superior glass (of approved quality) 40 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 17.33 Providing and fixing 600x120x5 mm glass shelf Each 20 942.15 18843 with edges round off, supported on anodised 41 aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP 17.73 brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of 645 Each 20 600.35 12007 42 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe 18.7 with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 43 18.7.3 25 mm nominal dia Pipes Metre 60 408.55 24513 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing 18.8 of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 44 18.8.2 20 mm nominal dia Pipes Metre 60 513.75 30825 Providing and fixing uplasticised PVC connection 18.21 pipe with brass unions : 18.21.2 45 cm length 45 18.21.2.1 15 mm nominal bore Each 40 85.2 3408 Providing and fixing C.P. brass shower rose with 18.22 15 or 20 mm inlet : 46 18.22.1 100 mm diameter Each 10 166.35 1663.5 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 47 18.49.1 15 mm nominal bore Each 20 434.2 8684 Providing and fixing C.P. brass long body bib cock 18.51 of approved quality conforming to IS standards and weighing not less than 690 gms. 48 18.51.1 15 mm nominal bore Each 20 708.4 14168 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 49 18.53.1 15mm nominal bore Each 40 500.35 20014 18.53A Providing and fixing C.P. Brass extension nipple Each 75 61.7 4627.5 50 (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. Providing and fixing PTMT grating of approved 18.58 quality and colour. CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY 18.58.1 Circular type 51 18.58.1.2 125 mm nominal dia with 25 mm waste hole Each 40 45.25 1810 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, 26.86 modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 52 26.86.2 Frame size 45 x 85 mm Metre 48 832.95 39981.6 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), m i n i m u m compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance 26.88 to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 53 26.88.1 30 mm thick Sqm 9.6 4327.7 41545.92 CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal 26.89 strength of 1800 N (Face) & 900 N (Edge), m i n i m u m compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 54 26.89.1 18 mm thick Sqm 22 2714.15 59711.3 Total 2499623.95

A-List of items of work that are covered under Delhi Schedule of