PROVN OF INTERLOCKING TILES BEHIND BLDG NO. 33 (PL MESS) ALONGSIDE PATHWAY BK NO. 01, BK NO 08, IN FRONT OF SHIVAJI COY OFFICE (BK NO 04), BK NO 05, SPECIAL REPAIR TO BLDG NO 59 (ASHOKA STORE) NEAR RRV COMPLEX, PROVN OF OVERHEAD PROTETION NEAR MT GAR

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets,complete all as specified and directed.

Providing and fiixing ceiling at all heights with GRG (Glass fibre reinforced gypsum) false ceiling tilesof size 595x 595mm of approved texture design and patterns having moisture content less than 2% humidity resisitance of 995 NRCO. 5 to .75 as per IS 8225: 1970 and light reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanised iron sectio of .33mm thick (galvanised @ 120gms per sqm including both sides per sqm including both side comprising of main T runner of size 15x 32 mm of length 3000mm cross T of size length 600 mm to form gride Gavanised @80 Gm per sqm I.e 50 mm long and 8mm outer diameter M -6 fasteners 6mm dia fully galvanised hanger rod upto 1000mm long L shaped level adjuster of size 85x25x2 mm galvanised iron perimeter wall angle of size 24x24x.4 mm of length 3000mm to be fixed on partition wall with the help of plastic rawl plugs at 450 mm center to center 40 mm long dry wall wood screws caried out as per specification and drawing all as directed by engr in charge with semi perforated 12 mm thick micro trangular edge GRG false ceiling tiles complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and as directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished fair and even complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 with and including liquid WPC as per manufacturers instructions on external walls finished even and smooth (without using extra cement) complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including prepration of surfaces complete all as specified and directed

M & L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

M&L for pre-polished Machine cut Kota stone slab flooring 20-25 mm thick over and including screed base 20mm thick in CM 1:4 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishing complete, all as specified and directed.

M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry @ 2 Kg per SQM, mixed with pigment to match the shade of the slab incl rubbing and polishing, laid over and including 10mm thick screed in cement mortar 1:4 complete all as specified and directed

Taking down door / window frame with shutter (without taking of shutter from the frame ) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fixing second class hard wood 35mm thick factory made Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix aluminium (colour powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint(Make of Aluminium Sections powder coated : Jindal or equivalent of JINDAL).

S&F colour powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

S&F 4 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S & F 100 mm long SS butt hinges and fixed with screw/welded to frames etc all as specified and as directed by EIC

Supply & fixing 150 mm Aluminium barrel tower bolts, fixed complete all as specified and as directed

Supply & fixing 150 mm Aluminium pressed handles fixed complete all as specified and directed.

S & F 250 mm in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed.

M&L providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg) , as in sub base in floor/paving etc complete all as specified and directed.

S&F in repairs 25mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed

S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.

Material & labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution)@ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Surface excavation not exc 30 cm deep and averaging 15 cm deep in soft/loose soil and getting out complete all as specified and as directed.

M&L for providing 100 mm thick cement concrete 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

M&L hardcore broken stone or boulders of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for path complete all as specified and directed.

M&L 60 mm thick machine pressed precast concrete interlocking paver block manufactured from ordinary portland cement any shape and size conforming to IS 15658-2006, M-35 Grade with grey cement and pigment.

M&L 80 mm thick machine pressed precast concrete interlocking paver block manufactured from ordinary portland cement any shape and size conforming to IS 15658-2006, M-40 Grade with grey cement and pigment.

Supply only Sand filling under floors/hardstanding or in foundations including watering and ramming complete all as specified and as directed.

Excavtion in post holes (or similar holes) each not exc. 0.50 cum in any kind of soil getting out, and removing surplus soil to a distance not exc. 25 mtr and making good of surfacescomplete all as specified and as directed.

M&L PCC 1:3:6 type C-2 ( using 40 mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tube conforming to IS 1161-1979 grade St-240 complete all as specified and directed

M&L Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality B all as specified and directed.

S&F for 11 to 15 mm mild steel screws bolts (machine made) with hexagonal or square heads at one end and screws both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm not exc 10 cm long complete all as specified and as directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plate, riveting, etc n.exc 10 kg each brackets, conforming to Fe-290. Gde E-165 .complete all as specified and directed

Material & labour preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L100 mm thick PCC 1:2:4 type B-2 (40mm graded stone agg) as in hard standing laid in alternate bays n. exc 1.20 Sqm each complete all as specified and as directed.

Supply only 98mm wide glass dividing strips, 3mm thick complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing where directed at a lavel .exc 1.50 mtr above the starting point complete all as specified and as directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes complete all as specified and as directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and as directed.

M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch complete all as specified and as directed. Make : Finolex/Havells/Polycab/KEI Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly complete all as specified and as directed.

As per item No 57 above but One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and as directed.

As per item No 57 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and as directed.

As per item No 57 above but One 3 pin 5 amps socket out let point on independent board complete all as specified and as directed.

Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed.

Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed.

Supply and fixing 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 120 watts single pole complete all as specified and directed.

Supply and fixing ceiling fans complete with three blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make : Bajaj/Havells/Crompton

Supply and fix exhaust fan made of metal body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. Make : Bajaj/Havells/Crompton

Supply and fix energy efficent surface mounted 2'x2' grid ceiling LED fitting 36/40 V, 50Hz combination with profiled and flat diffuse complete all as specified and directed. Make : Bajaj/Havells/Crompton

Supplying and fixing 20-22 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. Make : Bajaj/Havells/Crompton

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed. Make : Philips/Havells/Crompton

Supply and fix MCB Triple pole & neutral 414 volt 40 amps 10 KA, complete all as specified and directed. Make : Legrand/ABB/Havells/Crompton

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make : Legrand/ABB/Havells/Crompton

Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 23,330.00]

M/s T.S.JOHAR (BID ID -3141688)

M/s Rana Construction (BID ID -3138165)