Construction Of ROB At LC No 6 B On Hisar Mangali Sharwa Road CM Announcement Code No 20371 Dated 03 11 2017 Dismantling and shifting from Hisar Raipur Sikarpur Road to Mechanical Workshop Hisar repairing and launching installation at Balsamand

Amount

Dismantling Work :- Dismentling of One No. Balley Bridge (90 Feet Length & 18 Feet Width a) with 12 Nos Skilled Labour for 07 Days, Mazdoor/Dresser/Sinker (Skilled) , HSR LB069

Dismentling of One No. Balley Bridge (90 Feet Length & 18 Feet Width a) with Hydra/Crane for 07 Days, Cranes (b) 35 tonnes HSR PM073

Dismentling of One No. Balley Bridge (90 Feet Length & 18 Feet Width a) for removing apporches with Backhoe Loader Front End Loader 1 cum bucket Capactity HSR PM077

Provision for Dismantling of Bailey Bridge using welding cutter, generator, fuel, consumables & other required accessories and material etc to complete the job up to the entire satisfaction of Engineer-in-Charge of the work (L/S) NS

Loading, Unloading, and Carriage of Materials:- Steel (Approximate 50 Tonne X 38 Kms.) HSR 3.0, 3.1, 3.1.11

Timber (Approximate 3.25 Cum X 38 Kms.) HSR 3.1.12

Repairing & Painting Work:- Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming HSR 11.73.1

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of HSR 13.29.1

Provision for removing bend and repairing of Trumson inicluding the cost of material, Labour & loading unloading and other required accessories and material etc to complete the job up to the entire satisfaction of Engineer-in-Charge of the work (L/S) NS

Provision for removing bend and repairing of Stanger inicluding the cost of material, Labour & loading unloading and other required accessories and material etc to complete the job up to the entire satisfaction of Engineer-in-Charge of the work (L/S) NS

Installation/Launching work:- Installation/Launching of One No. Balley Bridge (70 Feet Length & 18 Feet Width a) with 12 Nos Skilled Labour for 05 Days HSR LB069

Installation/Launching of One No. Balley Bridge (70 Feet Length & 18 Feet Width a) with Hydra/Crane for 05 Days HSR PM073

Installation/Launching of One No. Balley Bridge (70 Feet Length & 18 Feet Width a) for removing apporches with JCB for 01 Days HSR PM077

Bolts & Nut Above 300 mm in Lengh HSR B0043

Mandatory sign board 600 mm circular as perIRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 3 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminiumalloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 6Dx60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORT&H pecifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012, Using high intensity Microprisomatic grade retro reflective Sheeting Class Bas per IRC 67 2012 (Through Rate) HSR 34.7.2

Informatory sign board 900x600 rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm onforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size .45x0.45x0.75m for vertical post complete as per dause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012, Using high intensity Microprisomatic grade retro reflective Sheeting Class Bas per IRC 67 2012 (Through Rate) HSR 34.11.2

Provision for Instalation/launching of 70 feet Bailey Bridge using welding cutter, generator, fuel, consumables & other required accessories and material etc to complete the job up to the entire satisfaction of Engineer-in-Charge of the work (L/S) NS

PRINCE TECHNICAL ADVISOR