PROVN OF BRICK DRAIN WITH RCC CULVERT NEAR BLDG. NO A/J/6 AT PMS

Amount

Excavation over areas n. exc1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm.complete all as specified and directed.

Removing excavated material soil nexc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified.

M&L for broken stone/boulders hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces.

M&L Cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for old size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in CM 1:4 all as specified as directed.

M&L for RCC 1:1.5:3 type A1 (20 mm graded stone aggregate) nominal mix as in slab Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified

M&L for RCC 1:1.5:3 type A1 (20 mm graded stone aggregate) nominal mix as in Columns, pillars, piers, posts and struts complete all as spd and directed.

M&L for Steel Centering and shuttering including strutting, propping etc. and removal of form to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for Steel Centering and shuttering including strutting, propping etc. and removal of form to sides of pillars, posts, struts, piers, columns and stanchions with for fair and finished surfaces complete all as spd and directed.

M&L for Forming fair finished drain or channel 55 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia and over, as in reinforcement, cut to length, bent to shape etc, including binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F mild steel TMT bar 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape etc, including binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for Providing cement concrete type B-0, 1:2:4 (12.5mm grades aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc including frames (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. complete all as spd and directed.

M&L for Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

S&F for 300mm bore reinforced concrete pipes, class NP-2 , laid and jointed complete all as spd and directed.

M&L for concrete bed to 300 mm dia drain pipes including forming cradle after they are laid and tested, in cement concrete 1:3:6 type C-2 complete all as specified and directed.

GALSI DEVELOPERS PVT LTD (BID ID -3316585)

rahul enterprise (BID ID -3316566)

M/S JOYGURU ENTERPRISE (BID ID -3314606)

M/S BHATTACHARJEE ENTERPRISE (BID ID -3314539)

S.D.ENTERPRISE (BID ID -3316556)

BHARAT CONSTRUCTION (BID ID -3314036)

M/s S A TRADING (BID ID -3314074)