Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.5 LAccepted-Finance | L1 | Accepted-Finance lowest | |
| 2 | L2₹11.0 L+₹46,540 (4.41%)Accepted-Finance | L2 | Accepted-Finance not found lowest | |
| 3 | L3₹13.8 L+₹3.2 L (30.7%)Accepted-Finance M S WALIA TRADING CO VILLAGE VASUDEVPURA NALAGARH ROAD VILLAGE VASUDEVPURA PINJORE HARYANA 134102 | PANCHKULA | HARYANA | 134102 | L3 | Accepted-Finance not found lowest | |
| 4 | L4₹13.9 L+₹3.4 L (32.1%)Accepted-Finance 6 GURU GOBIND SINGH NAGAR DHAKOLI DHAKOLI PATIALA PUNJAB 140602 | PATIALA | PUNJAB | 140602 | L4 | Accepted-Finance not found lowest | |
| 5 | L5₹14.4 L+₹3.9 L (37.0%)Accepted-Finance | L5 | Accepted-Finance not found lowest |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
11 Feb 2021, 6:00 pmClosed
GE basoli
GE Basoli PO lakhanpur Distt Kathua
REPAIR/RECANNING AND PAINTING/POLISHING OF ALL TYPE OF WOODEN AND STEEL FURNITURE UNDER GE BASOLI PROVN OF DG SET AT BASOLI UNDER GE BASOLI
2021_MES_411885_1
GE/BAS-59 of 2020-21
Open Tender
Civil Works
Item Rate
270 days
area of GE Basoli
class E catg d(I)
6 documents required · 6 mandatory
₹500
Yes
GE Basoli
₹30,000
Yes
18 Feb 2021
12 Jan 2021
13 Feb 2021
12 Jan 2021
11 Feb 2021
27 Jan 2021
Amount
REPAIRS TO CHAIR EASY (FD - 229)( For Srl No 01 to 07) Material and labour for replacement of damaged front legs of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged rear legs of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged arm-rest of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged fillet for canning of seat and back of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged rail of seat and back of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
Material and labour for removing old plastic cane from Chair and recanning with 2MM new plastic cane good quality as directed Boarder of chair shall be canning with 3 MM as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
REPAIR TO CHAIR DINING (FD-279 and FD-228) (For Srl item No 08 to 16) Material and labour for replacement of damaged front leg of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged rear leg of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged back rest of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged stiffener of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged side rail of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged front rail of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged back rail of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
Material and labour for removing old plastic cane from Chair and recanning with 2MM new plastic cane good quality as directed Boarder of chair shall be canning with 3 MM as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
REPAIR TO CHAIR WRITING (FD - 280 and FD-1107) (For Srl item No 17 to 26) Material and labour for replacement of damaged front legs of Chair writing made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged rear legs of Chair writing made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged back rest of Chair writing made out of well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged stiffener of Chair writing made out of well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged side rail of chair writing with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged front rail of chair writing with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged back rail of chair writing with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged fillet for canning of seat of chair writing with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
Material and labour for removing old plastic cane from Chair and recanning with 2MM new plastic cane good quality as directed Boarder of chair shall be canning with 3 MM as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
REPAIR TO TABLE 3’ X 2’ (WITH / WITHOUT DRAWER) (FD-283) (For srl item No 27 to 33 ) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, including 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new front rail of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new side rail of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of drawer with fancy knob as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for preparation of surfaces by removing of old existing fade out polish from table wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
REPAIR TO TABLE DINING FOR 8 PERSONS (FD-273 and FD-1115) (for srl item No 34 to 39 ) Material and labour for replacement of table top for table dining 08 persons 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, including 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged long rail of table dining 8 persons with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged leg of table dining 8 persons with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged short rail of table dining 8 persons with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of new H-stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for preparation of surfaces by removing of old existing fade out polish from table wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
REPAIR TO TABLE DINING FOR 6 PERSONS (FD-273 and FD-1115) (for srl item No 40 to 45 ) Material and labour for replacement of table top for table dining 06 persons 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, including 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged long rail of table dining 6 persons with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged leg of table dining 6 persons with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged short rail of table dining 6 persons with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of new H-stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for preparation of surfaces by removing of old existing fade out polish from table wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
REPAIR TO TABLE DINING 120x90)(FD/MAP-II/03 ) (for srl item No 46 to 51 ) Material and labour for replacement of table top for table dining 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, including 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged long rail of table dining with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged leg of table dining with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged short rail of table dining with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of new H-stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for preparation of surfaces by removing of old existing fade out polish from table wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
REPAIR TO TABLE WRITING (FD – 33,249,275) (for item No 52 to 57 ) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of drawer with fancy knob as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of shutter with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round including Knob and lock as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for preparation of surfaces by removing of old existing fade out polish from table wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
REPAIR TO TABLE CENTRE (FD-274) (for Srl item No 58 to 62 ) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mmthick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged front rail of table with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged side rail of table with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for preparation of surfaces by removing of old existing fade out polish from table wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
REPAIR TO TEA POY (FD-232 and FD-278) (for srl item No 63 to 68 ) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged front rail of tea poy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged side rail of tea poy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for preparation of surfaces by removing of old existing fade out polish from table wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
REPAIR TO PEG TABLE (FD-384) (For srl item No 69 to 72 ) Material and labour for replacement of table top with 18/19mm thick Pre- laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of leg of peg table with new legs of required size made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged side / front rail of peg table with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for preparation of surfaces by removing of old existing fade out polish from table wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
REPAIR TO BED PLYWOOD TOP (FD-246) (For srl item No 73 to 78 ) Material and labour for replacement of top of bed ply wood with 12 mm thick commercial plywood, BWR grade, ISI marked of make Kit ply/century ply/green ply fixed on the top of bed plywood with screws as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged long rail of bed with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of unserviceable head board of bed ply wood topas shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of unserviceable foot board of bed ply wood top as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of unserviceable short rail of bed ply wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for preparation of surfaces by removing of old existing fade out polish from table wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
REPAIR TO SIDE BOARD (FD – 26 M & 241 ) (for srl iten No 79 to 84 ) Material and labour for relacement of top of side board with 18/19mm thick pre laminated particle board one side teak faced with 4 mm thick teak wood edging all-round as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of door shutter of side board with 18/19 mm thick one side teak faced pre-laminated particle board including CP handle one no & lock fixed to one shutter with 6 mm thick teak wood beading alongwith hinges as shown on drawing complete all as specified and directed by the Engineer-in-charge
Material and labour for replacement of drawer of side board including one of CP knob fixed to each drawer as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for replacement of back side of side board with 9 mm thick commercial ply wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for replacement of sides of side board with 18/19 mm thick prelaminated particle board as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for replacement of leg of side board of required size made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Replacement/Repair to following parts of Sofa Set 5 seater FD-1113 (For Srl Item No 85 to 93 ) Supply of foam cushion of size 530 mm X 565 mm X 100 mm thick (32 high density) covered with tapesty cloth (not less than Rs.200/- per mtr cost of cloth) including stitching with one side Zip complete all as specified and directed by Engineer -in -Charge.
Supply and fixing of arm rest made of 1st class teak wood of size 35mmx70mm and shape and length as as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of front long rail made of 1st class teak wood of long piece (3 seater) of size 35mmx70mmx1730MM and shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of back long rail made of 1st class teak wood of long piece (3 seater) of size 35mmx70mmx1730MM and shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply supply and fixing of wooden batten made of 1st class teak wood for long seat and back and shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply supply and fixing of front rail single seater made of 1st class teak wood of long piece of size 35mmx70mmx530MM and shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply supply and fixing of back rail single seater made of 1st class teak wood of long piece of size 35mmx70mmx530MM and shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of legs made of 1 st class teak wood hard of size 70mmx35mmx530MM & shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for preparation of surfaces by removing of old existing fade out polish from wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
Replacement/Repair to following parts of Sofa Set 4 seater FD-1113 (For Srl Item No 94 to 100 ) Supply of foam cushion of size 530 mm X 565 mm X 100 mm thick (32 high density) covered with tapesty cloth (not less than Rs.200/- per mtr cost of cloth) including stitching with one side Zip complete all as specified and directed by Engineer -in -Charge.
Supply and fixing of arm rest made of 1st class teak wood of size 35mmx70mm and shape and length as as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply supply and fixing of wooden batten made of 1st class teak wood for long seat and back and shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply supply and fixing of front rail single seater made of 1st class teak wood of long piece of size 35mmx70mmx530MM and shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply supply and fixing of back rail single seater made of 1st class teak wood of long piece of size 35mmx70mmx530MM and shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of legs made of 1 st class teak wood hard of size 70mmx35mmx530MM & shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for preparation of surfaces by removing of old existing fade out polish from wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
Trestle Store Room (For Srl Item No 101 to 106 ) Supply and fixing of long rail made of 1st class hard wood sheeshamof size and shape and length as as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of short rail made of 1st class hard wood sheeshamof size and shape and length as as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of centre rail made of 1st class hard wood sheeshamof size and shape and length as as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of leg made of 1st class hard wood sheeshamof size and shape and length as as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of PGI sheet 22 gauge on trestle wooden as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Preservative of trestle store room wooden with creaosote oil and used engine oil mixed ratio 50:50 complete all as specified and directed by the Engineer-in-Charge.
TABLE DRESSING LADIES FD-32,FD-251(For Srl Item No 107 to 110)Material and labourBox for Table Dressing Ladies of size 1200mm x 600mm made out of 18mm thick PPB exterior grade melamine faced. ISI marked with and including aluminium channel 12mm x 22mm all round complete
Material and labour for Frame of size 1200mm x 365mm made of Sheesham wood, with & including back of 6mm thick ply wood ISI Marked commercial for looking mirror complete. all as shown on drawing and specified .
Material and labour for preparation of surfaces by removing of old existing fade out polish from wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
Chair School with hard board FD/E6/MAP/05 Sh 1/1(For Srl Item No 111 to 112 )Material and labour for Replacement of PVC seat which shall be of 4mm thick with 4x10mm ribs running in longitudenal & transverse direction moulded internally with seat & seat is to be fitted with screw made of alumunium alloy. , complete all as shown on drawing and specified .
Material and labour for replacement of open able top shall be of 18mm thick prelaminated partical board of extenior grade confirming to IS-12823 duly fitted to slide on the right frame. The edge of top shall be finished with 1.5mm thick PVC beading with wire nails complete all as shown on drawing and specified .
Table Computer FD/E6/MAP/03 (For Srl Item No 113 to 119 )Material and labour for table top made of 18mm thick prelaminated particle board with PVC lapping alround the top, complete all as shown on drawing and specified .
Material and labour for 18mm thick prelaminated particle board as use in key board tray of computer table with PVC lipping alround the tray and telescopic channels fixed with screw.complete all as shown on drawing and specified .
Material and labour for 18mm thick prelaminated particle board key as use in drawer of computer table with PVC lipping alround the tray and telescopic channels and fancy type Knob fixed with screw.complete all as shown on drawing and specified .
Material and labour for 18mm thick prelaminated particle board as use in board pull out tray of computer table with PVC lipping alround the tray and telescopic channels fixed with screw.complete all as shown on drawing and specified .
Material and labour for 18mm thick prelaminated particle board as use in middle shelf of computer table with PVC lipping alround the middle shelf fixed with screw.complete all as shown on drawing and specified .
Material and labour for 18mm thick prelaminated particle board as use in vertical shelf of computer table with PVC lipping alround the shelf fixed with screw.complete all as shown on drawing and specified .
Material and labour for 18mm thick prelaminated particle board as use in bottom shelf of computer table with PVC lipping alround the shelf fixed with screw.complete all as shown on drawing and specified .
Chair Computer/ Chair Executive Revolving (TP) (For Srl Item No 120 to 124 )Material and labour for taking out unserviceable pedestal assembly and caster wheel(Twin) of chairs and supply fixing new as per existing size, shape and pattern, as directed by Engr-in-Charge.
Material and labour for taking out unserviceable Gas lift pneumatic system cylinder and assesory of chair computer and supply fixing new all as per existing size, shape and pattern as directed by Engr-in-Charge.
Material and labour for taking out unserviceable PVC arm 02Nos of chair computer and supply fixing new all as per existing size, shape and pattern as directed by Engr-in-Charge.
Material and labour for taking out unserviceable Tapestry cloth of Seat PU foam cushion and supply and fixing new tapestry cloth and PU foam cushion of approved qulality with PVC lapping all around including new hot pressed plywood 12mm for back as directed by Engr-in-Charge.
Material and labour for taking out unserviceable Tapestry cloth of back PU foam cushion and supply and fixing new tapestry cloth and PU foam cushion of approved qulality with PVC lapping all around including new hot pressed plywood 12mm for back as directed by Engr-in-Charge.
Repair & recanning of chair verandah(FD-259, FD-256) (For srl item No 125 to 126 ) Material and labour for replacement of unserviceable parts of chair verandah with new conduit pipe of size 20 mm dia x1.6 G and fixing the same with electirc running welding to chair verandah wherever required to the existing chair varandah as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for replacement of unserviceable plastic cane from chair verandah and recanning of the existing with 4MM vide 1/2 Rd plastic cane good quality in Mat pattern including painting with two coat of synthetic enamal paint white before canning and 04 Nos PVC rubber shoes to the legs as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
vivek and co
Walia trading co
JP AND CO.
M/S MALHI CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .