Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹5,400
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer (Civil), TCD Siliguri
TCD, Siliguri
Construction of infrastructure for defence project ( NFS) C-2 ( Porta cabin) at Thegu, Sikkim (SH-Repairing and maintenance ).
2023_BSNL_153802_1
54/BSNL / CD-SLG/ 22-23/ 34 (2nd Call)
Open Tender
Civil Works
Item Rate
60 days
Thegu, East Sikkim
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
Accounts Officer (Cash), BSNL, O/o the General Man
₹5,400
26 Jun 2023
11 May 2023
12 Jun 2023
11 May 2023
3 Jun 2023
12 May 2023
Amount
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : (a) Cement mortar 1:6 (1 cement : 6 coarse sand).
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (a) Single rubber stopper.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : (a) Ridges plain (500 - 600mm).
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. (a) With cement mortar 1:4 (1 cement : 4 fine sand).
Removing the existing precoated galvanised iron profile sheets and re-fixing the same by increasing the lap joint size to stop the water seepage during excess rainfall or snowfall over the roof.
Providing and applying by spraying Polyurethane Foam (Anabond Foam-100 or equivalant) for sealing the joint at wall, at wall and chajja junction at top of chajja to prevent any seepage / leakage of rain water all complete as per direction of the Engineer-in-charge. The item to be applied strictly as per manufacturer's specification.
Providing and fixing Mineral fibre board of Armstrong brand or equivalant suspended ceiling system with tegullar/revealed edged ceiling tiles of size 600mm x 600mm, 12mm to 15mm thick with humudity resistance (RH) of 0.99% NRC 0.55, CAC 34DB, fire performance class o/class-I (BS/476), light reflectance 84%, thermal conductivity 0.052 W/MK, weight 3.5 Kg/sqmt, colour white, at all height as per specification, drawing, and as per direction of Engineer-in-charge.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .