Construction of Munsiff Court Complex and Residential Quarters at Basohli. (2nd call).

Supplying, installation, testing and commissioning of 1.5 Ton Inverter type Split AC's (copper) Cold type of minimum capacity following Specification as detailed below. 1. Should be of inverter type 2. Cooling capacity (in Tr): 1.5 3. BEE Star rating: 5 4. Maximum local temperature: 52 C 5. Rated cooling capacity (BTU/hr.): 19000 or above 6. Condensing coil: 100% Copper with grooved copper tubes 7. Electrical input, 220 V ± 30/50Hz/Single Phase 8. Noise level (indoor unit): = close to 35 dB 9. Compressor type: rotary or any other suitable technology 10. Refrigerant type: R-32 11. Anti-Corrosive Coating for the outdoor unit: Bule Fin/Gold Fin or equivalent 12. Compressor Warranty: 10 years 13. PCB Warranty: 5 year 14. Total System Warranty: 1 year 15. Minimum noise level of the indoor unit should be around 28 dB (A)

16. Should have air filtering mechanism for removing dust 17. Supplier has to include brochure of the quoted model Each unit must provide cooling & dehumidification, be operatable via remote control, operate at 220-240 V AC supply with latest in vogue features. The job includes Repairs made to wall whereever as required.

Supplying, Installation, Testing & Commissioning of following capacity automatic voltage stabilzer copper wound wall mounted, single phase with range of 90-240 V along with wall mounting brackets & fitting. The job includes repairing the walls where necessary. Warrantee.:- 2 Years from the date of installation.

Supplying & fixing of M.S Wall Stand duly powder coated for outdoor unit of Split AC

Supplying & fixing of drain pipe for indoor unit 1"

Extra length of copper pipe for outdoor unit and suitable size copper cable of required size for 1.5 Ton AC

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25/20 A modular socket outlet and 25/32 A modularDP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole and neutral

Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as pre approved by Engineer in charge.

Supplying & fixing of RJ 45 Network Jack CAT6

Supply & Installation of IP-20 & IK-08 , UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19" angles with wall mounting provision on wall. Accessories like: 1 No of 19" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in charge

9 U Rack with Width 600 mm & Depth 400 mm + 100 mm

Supply & Installation of IP-20 & IK-08 , UL Listed Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet,Vertical Mounting Rail 1.6 MM with 'U'Marking, front sturdy sheet steel frame folded from one piece and welded with 5mm toughened glass door, with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, Set of 75 mm height 4 castors, 2 of which have brakes, Accessories like: 5 Nos of 19" 1U Horizontal Cable manager, 2 Nos of vertical cable managers, 1 no. Keyboard Tray, 4 Nos of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 2 No of 19" 1U, mountable socket strips with 6 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable complete in all respect. All as per pre approved by Engineer in charge. 36 U Rack with Width 600 mm & Depth 800 mm

Supply,Installation and Comissioning of Managed Switch 24 10/100/1000BasePort Functions IEEE 802.3 for Ethernet,IEEE 802.3u for Fast Ethernet, IEEE 802.3ab for Gigabit Ethernet,IEEE 802.3z for Gigabit fiber,IEEE 802.3af/at (DGS-1100-24PV2 ports 1 to 12 only),IEEE 802.3az compliant,Auto-negotiation,Auto MDI/MDIX,IEEE 802.3x Flow Control supports full-duplex mode,Supports half/full-duplex operation,(full/half at 10/100 Mbps, full at 1000 Mbps), Switching Capacity 48 Gbps, Maximum Forwarding Rate 35.71 Mpps, Flash Memory 16 Mbytes, Operating Temperature -5 to 50 °C (23 to 122 °F) Storage Temperature -40 to 70 °C (-40 to 158 °F) Operating Humidity 0% to 95% non-condensing, Safety cUL, CE LVD, CB, BSMI, CCC, Port-based VLAN, 802.1Q tagged VLAN,Auto Surveillance VLAN, Voice VLAN, Management VLAN, Flow Control 802.3x Flow Control HOL Blocking Prevention Jumbo frames up to 10,000 Bytes IGMP Snooping V1/V2/V3 awareness Supports 128 Groups IGMP Snooping Querier 802.3ad Link Aggregation: Support max 8 groups per device and 8 ports per group Loopback Detection, 802.1p Quality of Service 8 queues per port Queue handling Strict Weighted Round Robin (WRR), Traffic segmentation Broadcast/Multicast/Unknown Unicast Storm Control DoS attack prevention,SSL, Web-based GUI (supports IPv4/IPv6), Power saving by Link status LED shut-off Port shut-off System hibernation Compliant with IEEE 802.3az Energy Efficient Ethernet (EEE) Compliant with RoHS 10.

Supply , Installation, Testing and Comissioning of Managed Layer-2 Intelligent Giga Ethernet Switch providing 48 x 10/100/1000 MBPS Giga Ethernet ports and with min 4 SFP Giga Ports (provision for Fiber Giga connectivity) all switches & related Fiber modules should be of same make & category for seamless integration with each other of Enterprise class Catalyst Series including making connections etc as required. All as per pre approved by Engineer in charge.

8 Port Managed PoE Network Switch for WiFi Access Point with Brief Specification: Switch with at least 8 x 10BASE-T/100BASE-TX/1000BASE-T POE Ports, 2 x 100/1000 Mbps SFP ports, auto- negotiatiation ports. Switching capacity should be 20Gbps or higher or non-blocking architecture & minimum throughput of 14Mpps. MAC table should be at least 8K or higher. 802.3at PoE+ and 802.3af PoE power to any of the PoE RJ-45 ports.PoE Power Budget ( Watt ) 130W or higher. Support for the IEEE 802.3az standard. Power input should be 100 to 240 V AC 50/60 Hz internal universal power supply. Switch Should Support Spanning Tree (STP) 802.1d, RSTP 802.1w , 802.1s MSTP, Loopback Detection, Link Aggregation LACP 802.3ad. Switch Should Support Port Mirroring: One-to-One / Many-to-One, Jumbo Frame: 10K Bytes or higher, Dual image & Dual configuration, Multicast Filtering. Switch Should Support IGMP Snooping : v1 / v2, IGMP Snooping Groups : 256. Switch Should Support Tagged VLAN 802.1Q, 256 Static VLANs, Auto Voice & Surveillance VLAN. Switch Should Support IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x Flow Control, IEEE 802.3z. QoS Features such as 802.1p Quality of Service, 8 queues per port, Queue Handling, Strict, Weighted Round Robin (WRR), Bandwidth Control. Basic Layer-3 Protocol Features such as IPV6 ND , IP Interface 4 , Static routing, 124 IPv4 static route entries, 50 IPv6 static route entries. Security Features such as ARP Inspection, IMPB , Port Security, Traffic segmentation, SSH v2, TLS v.1.2, DoS attack prevention. Switch Should Support 802.1X Authentication, local/RADIUS database, port-based access control, EAP, OTP, TLS, TTLS, PEAP, Max. 128 entries when using local database, IPv6 RADIUS server, MD5 authentication. Switch should Support Management features like Web-based GUI, Telnet Server, TFTP Client,

Supports SNMP v1/v2c/v3, SNMP Trap, IPv4/v6 Dual Stack, DHCP Auto Configuration, NTP/SNTP, Dual image/ Dual configuration. Switch should be IPv6 Ready Compliance. having warranty period of 5 Years or more years and site. Operation Temperature 0 to 50 ˚C, Storage Temperature -40 to 70 ˚C. Switch should have FCC, CE and UL Certificates. Product Should Approved from TEC under Mandatory Testing and Certification of Telecom Equipment as notified vide Indian Telegraph (Amendment) Rules, 2017. OEM Should be International certification for the ISO 45001 Health and Safety Management System, ISO 9001 Quality Management System, ISO 14001 Environmental Management System, and ISO 14064-1 Greenhouse Gas Inventory Standards.

Indoor,Access,Point Access Point should have Wi-Fi: 802.11a/b/g/n /ac/ax, 802.11d & 11h, EAP, EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, Access point Should Support IEEE 802.11b/g/n/ac/ax, Wifi-6, 2x2+2x2 , PoE (802.3at) Access Point, Data Signal Rate Up to 1800 Mbps, Supports enhanced security – WPA/WPA2/WPA3 Personal and Enterprise, RADIUS client, and Cipher negotiation, Access Point should have Interface Power Jack, Factory Reset Button, console port and LAN ports (PoE), Network Management: HTTP, HTTPS, Software Controller, Hardware Controller, SNMP Support, Telnet, Email Notification, Secure SSH Telnet., should allows auto fallback data rate for reliability, optimized throughput and transmission range, support Four Dual Band Internal Antennas: - 3.2 dBi (2.4 GHz), 4.3 dBi (5 GHz) and Maximum Output Power 23 dBm (2.4 GHz), 26 dBm (5 GHz), Access Point should support 802.1x, RADIUS Server, POP3 and LDAP, should support Multi-Tenant and Role-Based Administration. support Wireless Resource Airtime Fairness, Connect Limit, Aging out, ACL RSSI and Band Steering, Wireless MAC ACL, WLAN Partition. Support ARP Spoofing Prevention, Wireless Intrusion Protection, Bandwidth Optimization.

Captive Portal with industry-standard authentication. Access Point should support MAC-based access filtering and WLAN partitioning, Wi-Fi Multimedia Quality of Service (QoS), Traffic Control Uplink and Downlink limit, Access Point should show Ethernet traffic statistics and WLAN traffic statistic, Access Point should support Load balancing to optimize performance between Access Points. Access Point should have - FCC, CE Certifications. OEM Should be International certification for the ISO 45001 Health and Safety Management System, ISO 9001 Quality Management System, ISO 14001 Environmental Management System, and ISO 14064-1 Greenhouse Gas Inventory Standards.

Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A /Class E/Ea patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors with strain relief boots as per ANSI/TIA/EIA 568-C.2 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568C.2, ISO/IEC 11801, EN 50173, IEC 60603-7-51, EN 60603-7, IEEE 802.3an minimum requirement for 1G BASE-T to 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, should support IEEE 802.3af / IEEE 802.3at for POE applications, Minimum 750 to 1000 mating cycles in plug contacts for long durability, Should support Ethernet 10GBASE-T, 1.2 Gb/s ATM, Token ring 4/16, Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP).All as per pre approved by Engineer in charge. Cat 6, U/UTP (Unscreened/Un-sheilded Twisted Pair) Patch Cord

Please Enable Macros to View BoQ information