Special repair of polled residential accommodation at Chamba Replacement of flooring , roofing, painting ,distempering and replacement of sanitary installation in 2 Nos. type-III Quarter

Amount

Dismantling of AC sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable material up to any lead & lift as per the directions of the Engineer-in-charge.

Demolition of un-reinforced cement concrete above ground level upto floor two level including disposal of unserviceable materials up to any lead & lift as per the directions of the Engineer-in-charge.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating of TATA Durashine including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including all taxes, carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five microns) primer coating and back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying 10mm (ten millimetre) thick water proof stain and impact resistant heavy duty, double charged vetrified tiles orient Bell /Nitco of equivalent shade 600x600x10mm (six hundred into six hundred into ten millimetre) size manufactured of approved shade and colour in flooring, treads of steps and landing laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) with Ist quality granite border jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including all taxes and carriage of materials within all leads, lifts as per specification as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying granite stone in flooring 20mm twenty millimetre (average)thickness base of cement mortar 1:3( one cement is to three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete within all leads, lifts as per specification as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Wall painting (two or more coats) with acrylic emulsion paint of Asian / Narolac approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Painting two or more coats (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than white as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and placing in position 1000 (one thousand) litres net capacity PVC water storage tank of ISI 12701 marked G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor 15 mm (fifteen millimetre) nominal bore as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing vitreous China water closet squatting pan (Indian type W.C. pan) of Hindware ( earth work, bed concrete, foot rest and trap to be measured and paid for separately). Orrisa pattern No. 2090 of size 53x41 cm. of hindware / Cera Jaquuar or star whire/ snow white as per specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing C.P. brass pillar tap of Hindware with capstan head 15mm (fifteen millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing vitreous China flat back size 550x400 mm (five hundred fifty into four hundred millimetre) wash basin of Hindware with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing vitreous China pedestal for wash basin of Hindware complete recessed at the back for wash basin complete recessed at the back for the reception of pipes and fittings as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing C.P. brass angle valve 15mm (fifteen millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC connection with brass union 45cm. (forty five centimetre) Long and 15mm (fifteen millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing charomium plated brass soap dish of continental series of Jaquar / contessa of hindware/ ocean series of Cera with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 600mm X 20mm (six hundred millimetre into twenty millimetre) C.P. brass towel rail of continental series of Jaquar / contessa series of hindware/ ocean series of Cera complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 600mm X 450 mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (six millimetre)thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying PVC plain bend of ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred ten millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC 110x90mm (one hundred ten into ninety millimetre) dia floor trap ISI Marked of self cleaning design including fixing with approved adhsive, cost of cutting making the walls and floors etc. complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing high pressure PVC spigot and socket of supreme make , waste and ventilating pipes ISI marked having 4 to 4.6 mm ( four to four point six millimetre) thickness including fixing with approved adhesive 110 mm (one hundred ten millimetre) diaas directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PTMT coloured/ white high density polythene / poly prolylene 10 litre (ten litre) capacity low level P.V.C. cistern plus) flushing cistern with a pair of C.I. or M.S. brackets complete with fitting such as lead valve syphon, 15mm (fifteen millimetre) dia PVC wall valve , coupling for connection with inlet, outlet and overflow pipes 40mm (forty millimetre) dia C.P. flush bend including cutting holes and making good the same (overflow pipe to be measured and paid for separately) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC P or S trap for water closet (squatting pan ) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete 150mm (one hundred fifty millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 610x510 mm with bowl depth 200 mm stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

GULAM NAVI

Darshan Kumar

Dheeraj Badyal Govt Contractor