CERTAIN REPAIRS TO PLUMBING, SANITARY FITTINGS AND CONNECTED WORKS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Notes:- 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of item/date. 2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay. 3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station. 4. If any painting works, contractor need to clean the area and remove the drop marks from floor, doors, windows, sills, inbuilt furniture items etc. otherwise a recovery of Rs 10.00 per sqm in internal paintings and Rs 5.00 per sqm for external paintings will be made from contractor. 5. Contractor should maintain separate registers for plumbing and carpenter repair works. Day to day complains should be noted in those registers with SI nos of complaints, location, qty of work, status of complaints and signature of incharge and stamp of the office. Format will be given from AGE B/R Office. Contractor should obtain the signature of incharge on the same day of work. These registers to be submitted to JE (Civ) on every weekend without fail. 6. List of complaints will be given to contractor on the first week of every month. Contractor should ensure all the works will be completed within that month itself. 7. Contractor should ensure that plumbing complaints resulting in wastage of water should be attended and rectified within 24 hours. Otherwise, a recovery of 25% of corresponding item will be made from contractor. 8. Contractor will make his own arrangement to store his items. 9. Some places in this contract where the vehicle will not reach the spot directly, the material will be moved manually in these places. The rate quoted will be considered all inclusive on this account. 10. All trade skilled labour required in this contract shall be present daily in working hours, irrespective of complaints received. 11. Complaint for a similar items may be in scattered / different area, quoted rate will be considered all inclusive on this account.

Taking down or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.

Taking down or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store all as specified and directed.

Supplying and laying 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and fix in repair vitreous china ware wash hand basin 550mm x 400 mm size flat back or angle including new bracket and making good all connections in repairs complete all as directed

Supply and fix vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests including removing the existing one complete and making good all connections as in repairs all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, flushing cistern , seat cover and flush pipe all as specified and directed.

S & F 32mm dia bore Brass chromium plated bottle traps for wash basins with inlet and outletscrewed for pipe or connections including necessary packing, union and cap and fixed complete

S&F in repairs water closet 'S' trap Ivory colour 680 x 370x 750mm (One piece) with soft close seat cover with twin flusing cistern fitted on floor with wall distance 225mm +/- 10mm from the wall complete all as specified and directed. Make CERA/Parryware or equivalent

S&F in repairs for Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe all as directed and specified.

S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete as in repairs all as specified and directed.

S&F in repair angle valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repair 15 mm bore CP fancy type long body Bib tap crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair 15 mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure complete all as specified and as directed.

S & F in repair 15mm Bib tap fancy type of PTMT any colour high pressure screwed for iron pipe and fixed Minimum weight 15mm-90gms/20mm125gms). Complete all as specified and directed

S & F in repair 15mm long body Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed Minimum weight 15mm-1205gms). Complete all as specified and directed

S & F in repair 15mm Pillar taps of PTMT fancy type any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) complete all as specified and directed

S & F in repair 15mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)complete all as specified and directed

Supply and fix 15 mm bore PVC connection pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.

S&F in repair 15mm wall mixer CP fancy type long body for mixing of HOT or COLD, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed Make : PRAYAG/CERA or equivalent.

S&F in repair 15 mm bore WHB mixer taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure complete all as specified and as directed. Make : PRAYAG/CERA or equivalent.

S&F in 15 mm bore pillar taps with sawn neck ,chromium plated,screwed down, fancy type high pressure complete all as specified and as directed.

S&F brass CP Shower rose with arms 125 mm size fixed to pipe all as specified and directed.

S&F Sheet glass assembely consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long above WHB.

S & F in repairToilet paper holder with flat recessed type stainless steel or CP complete all as specified and directed."

S&F in repair sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S&F Brass Chromium plated Tubular towel rail, 20mmdia, D type, 60cm long between flanges all as specified and directed.

Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as specified and directed.

S&F 32mm Dia PVC waste pipe for sinks, urinals or wash basins complete all as directed and specified.

S&F in repair Two way taps 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch screwed both ends for iron pipe or for unions all as specified and directed. Make : PRAYAG/CERA or equivalent.

S & F Hat and coat hooks (Peg set of 04), solid body of CP, 175mm to 250 mm fixed complete all as specified and directed

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed complete all as specified. Make : PRAYAG/CERA or equivalent.

Supply and fix Grating doom 125 mm dia with / without waste hole of PTMT (Minimum weight 40gms) and fixed in repairs all as specified and as directed.

S & F in repair new stainless steel plate rack of minimum size 970x770x230mm of standard quality,fixed to wall with wooden gutties and screws complete all as specified and directed.

S&F in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

M&L Rendering internal 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished even and smooth with out using extra cement all as specified and directed.

M&L preparation of newly plastered surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer and chalk whiting with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed

Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed.

S&F PVC (SWR)110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) floor trap of 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed.

Demolition of Concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed

M & L Mild steel work as in handles of man hole cover slabs, rungs of man holes, straps and similar articles confirming to FE-290 Gde E-165 etc complete all as specified and as directed

M & L precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for man holes etc.) set in CM 1:6. including all necessary form work etc complete all as specified and as directed

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as directed

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 1 00 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC as per SSR Part-II complete as per direction of EICe. (Rate quoted is inclusion of M.S. hold fast/ lugs or SS dash fasteners ).

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin as per SSR Part-II and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Rate quoted is inclusion of stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 125 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed, for flush pressed steel door frame complete all as specified and as directed

Supply and fix 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed

Supply and fix 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed

S & F 300mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Removing excavated material exc 1.5m but n.exc 5 km and depositing where directed

Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M&L 25mm thick Plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) Laid in flooring as specified and directed

M&L for non skid colour ceramic tiles of 300mm x 300mm of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles all as specified and as directed.

M & L Virified Ceramic tiles double charged/ultracharge light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles all as specified and as directed.

M & L Virified Ceramic tiles double charged/ultracharge shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm , for skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering coat/backing layer in CM (1:3) complete all as specified and directed

M & L Virified Ceramic tiles double charged/ultracharge light shade 10 mm thick (square/ rectangular) polished, area of each not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles all as specified and as directed.

M & L Virified Ceramic tiles double charged/ultracharge light shade 10 mm thick (square/ rectangular) polished, area of each not exceeding 0.36 sqm , in skirting/daddo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles all as specified and as directed.

M&L 75 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) laid in floor as sub base concrete , complete all as specified and directed

M&L for Rubberised chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over 15mm thick cement screed bed 1:6 complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water and removing the debris out of MOD land etc complete all as directed.

M & L for digital coloured glazed ceramic coloured tiles of sizes 300mm x 600 mm X 7 mm thick jointed in neat cement slurry, in vertical surfaces laid over including 10 mm thick rendering coat/backing layer in CM (1:3) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and as directed.

M & L for digital coloured glazed ceramic coloured tiles of sizes 300mm x 450 mm X 7 mm thick jointed in neat cement slurry, in vertical surfaces laid over including 10 mm thick rendering coat/backing layer in CM (1:3) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and as directed.

M & L for 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rounding edges,grinding and polishing complete all as specified and as directed.

S & F 20mm SS Curtain rods with fixing brackets, end caps, rollers etc complete all as specified and directed

S & F 500 Lts Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with all necessary fittings required as tank nipple, etc all as specified in SSR Part I including dismantling old or u/s water tanks and moving to stores complete all as specified and directed

S & F 1000 Lts Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with all necessary fittings required as tank nipple, etc all as specified in SSR Part I including dismantling old or u/s water tanks and moving to stores complete all as specified and directed

S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(Minimum weight 15mm-142gms/ 20mm-210gms/25mm-455gms/40mm-690 gms) all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed.