Construction of New Domestic Terminal Building at Udaipur Airport. S.H Furnishing of VIP lounges of New Passenger Terminal Building with interior, traditional seating and decorative articles at Udaipur Airport

Supplying, fixing and placing custom arch reception desk (Departure VIP Room) with storage of 3 drawers and 3 closed compartment units as per specification below: The carcase unit shall be made with minimum 18mm thick BWP ply groove cut and curved to shape by high degree of workmanship and applying suitable adhesive for required strengthening & other part shall be made with minimum 12mm thick BWP plywood. The complete front, top and side exposed surface shall be cladded/covered with 2mm thick SS sheet of chamagne gold patina finish without any visible joint following curved contour of bottom understructure and with well defined table top edge at top (Radius of curve at bottom 200-250 mm). Other surfaces including base, and all the sides to be laminated with suitable laminate (both sides laminated). Dimensions : Overall Length 2655 mm, Standing height- 1092mm, Seating height - 762mm, Overall depth - 914 mm (i.e. Primary Table of length 2655 mm X 914 mm deep X 762 mm high and Secondary Table of 2655 mm length X 250 mm depth X 1092 mm height) Dimension tolerance : +/- 10mm. All visible handles/fittings of storage units in metallic patina finished with lock and key facility. All hinges shall be concealed slow closing and and all drawers shall be telescopic roller mechanism. *As per approved drawings/reference image given in Technical Specification of Tender documents (Front Elevation) . The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP lounges of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing custom arch reception desk (Arrival VIP Room) with storage of 3 drawers and 3 closed compartment units as per specification below: The carcase unit shall be made with minimum 18mm thick BWP ply groove cut and curved to shape by high degree of workmanship and applying suitable adhesive for required strengthening & other part shall be made with minimum 12mm thick BWP plywood. The complete front, top and side exposed surface shall be cladded/covered with 2mm thick SS sheet of chamagne gold patina finish without any visible joint following curved contour of bottom understructure and with well defined table top edge at top. Other surfaces including base, and all the sides to be laminated with suitable laminate (both sides laminated) . Dimensions : Overall Length 1500 mm, Standing height- 1092mm, Seating height - 762mm, Overall depth - 914 mm (i.e. Primary Table of length 1500 mm X 914 mm deep X 762 mm high and Secondary Table of 1500 mm length X 250 mm depth X 1092 mm height) Dimension tolerance : +/- 10mm. All visible handles/fittings of storage units in metallic patina finished with lock and key facility. All hinges shall be concealed slow closing and and all drawers shall be telescopic roller mechanism. *As per approved drawings/reference image given in Technical Specification of Tender documents (Front Elevation) . The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP lounges of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying and placing Designer Low back Round seat Chair as per specification below: The overall dimension of chair – Dia of seat 550 mm, Height of chair 900mm H with footrest height 300mm. The seat & back shall be made of minimum15 mm thick hot pressed commercial plywood padded and cushioned with high resilience multidensity polyurathene foam minimum 50mm thick with Low density/Softer zones for comfort and plushness required in areas back contour and high density/firmer zones for support areas like seat. The same shall be upholestred with 0.80 mm full grain leatherite fabric/vegan leather of minimum 535 GSM at seat, back and armrest. The ring of pedestal base shall be made of SS 304 grade/Aluminium with PVD coating having sufficient diameter for stability of chair for intended load. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Console Table as per specification below: The overall dimension of Table 1800 mm L X 450 mm W X 1100mm H. The understructure shall be constructed with stainless Steel hollow section/sheet with (2.0 mm wall thickness) base of grade 304 with PVD coating to impart finished liquid metal of approved shade. The Table Top shall be made with 20 mm thick CNC cut exterior grade Laminate Board Following the design intent. Stability: The structure of table shall be stable under generally applied loads on table during intended usage against forces of over turning, bending and tension etc. of live loads and transportation loads, which is to be achieved by using appropriate design geometry, and sufficient strength material in understructure base. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Console Table as per specification below: The overall dimension of Table 1350 mm L X 450 mm W X 1100mm H. The understructure shall be constructed with stainless Steel hollow section/sheet with (2.0 mm wall thickness) base of grade 304 with PVD coating to impart finished liquid metal of approved shade. The Table Top shall be made with 20 mm thick CNC cut exterior grade Laminate Board Following the design intent. Stability: The structure of table shall be stable under generally applied loads on table during intended usage against forces of over turning, bending and tension etc. of live loads and transportation loads, which is to be achieved by using appropriate design geometry, and sufficient strength material in understructure base. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Console Table as per specification below: The overall dimension of Table 1000 mm L X 450 mm W X 1100mm H. The understructure shall be constructed with stainless Steel hollow section/sheet with (2.0 mm wall thickness) base of grade 304 with PVD coating to impart finished liquid metal of approved shade. The Table Top shall be made with 20 mm thick CNC cut exterior grade Laminate Board Following the design intent. Stability: The structure of table shall be stable under generally applied loads on table during intended usage against forces of over turning, bending and tension etc. of live loads and transportation loads, which is to be achieved by using appropriate design geometry, and sufficient strength material in understructure base. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing 3 Seater Sofa as per specification below: The three seater sofa made up of exclusive butterfly soft premium fabric of velvet or as approved, internal structure made in Sustainably Sourced Solid wood with seasoned , klin dried European white ash base (or equivalent) machined from wooden log of 30 cm. The complete wooden understructure shall be covered by PU foam cushion,the frame shall be padded and cushioned with high resilience PU foam having multidensity polyurathene foam of suitable thickness (Low density/Softer zones for comfort and plushness required in areas like shoulders/back contour and high density/firmer zones for support areas like seat and armrests). The complete stack foam structure shall be covered with premium exclusive premium fabric of velvet or as approved. *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions :Length 2250 mm, Width 835 mm, Height 632 mm, Seating Depth 600mm, Seating Height 450 mm. Clearance of bottom of MS frame lumber below seat from floor-top 150-200 mm Concept: Designed as two seperate and non overlapping plush tufted cushion elements; first element compising of backrest & armrest and second seat cushion element. Continuous brackrest and armrest element without any sharp/stright edge (all edges rounded up into smooth curves) following the back and side edge of seat cushion element. Three/ four sleek rounded edge tubular metallic legs supporting peripheral structural frame of seat and backrest/armrest element. Aspect ratio: Ratio of depth of seat cushion top from seat cushion bottom to height of back rest from seat is equal. Base line of backrest & armrest cushion element slightly overlapping top of seat cushion element to block any opening slits between elements. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing 3 Seater Sofa as per specification below: The three seater sofa made up of exclusive butterfly soft premium fabric of velvet or as approved, internal structure made in Sustainably Sourced Solid wood with seasoned , klin dried European white ash base (or equivalent) machined from wooden log of 30 cm. The complete wooden understructure shall be covered by PU foam cushion,the frame shall be padded and cushioned with high resilience PU foam having multidensity polyurathene foam of suitable thickness (Low density/Softer zones for comfort and plushness required in areas like shoulders/back contour and high density/firmer zones for support areas like seat and armrests). The complete stack foam structure shall be covered with premium exclusive premium fabric of velvet or as approved. *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions :Length 2800 mm, Width 835 mm, Height 632 mm, Seating Depth 600mm, Seating Height 450 mm. Clearance of bottom of MS frame lumber below seat from floor-top 150-200 mm Concept: Designed as two seperate and non overlapping plush tufted cushion elements; first element compising of backrest & armrest and second seat cushion element. Continuous brackrest and armrest element without any sharp/stright edge (all edges rounded up into smooth curves) following the back and side edge of seat cushion element. The exposed metallic understructure element comprise of three/ four sleek rounded edge tubular metallic legs supporting peripheral structural frame of seat and backrest/armrest element. Aspect ratio: Ratio of depth of seat cushion top from seat cushion bottom to height of back rest from seat is equal. Base line of backrest & armrest cushion element slightly overlapping top of seat cushion element to block any opening slits between elements. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing fixed Arm Chair as per specification below: The overall dimension of chair 720 mm W X 760mm D X 740 mm H x 420-500mm seat height. The complete frame structure shall be made with solid wood structure padded and cushioned with high resilience multidensity polyurathene foam of required thickness (Low density/Softer zones for comfort and plushness required in areas like shoulders/back contour and high density/firmer zones for support areas like seat and armrests) . The same shall be upholestred with premium exclusive silken fabric or as approved fabric of approved colour. Concept: Overall square seat geometry with smooth corners of backrest and armrest element transforms from mid back support to elbow height armrest support smoothly at top and completely covering and holding seat element from 3 sides upto bottom of seat. Outer (Backside) of barckrest and arm rest element shall be padded and covered with finely stiched leather/leatherette upholstry, all joints to perfectly blend at curves of outerside, and joints with inside (cushion) which shall be plush. Aspect ratio-. Clearheight of seat bottom from floor and overall seat thickness are equivalent. The legs shall be made of sleek mild steel sections with PVDF coating. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing fixed Side table as per specification below: The overall dimension of side table- 450 mm W X 450mm D X 450 mm H. The complete frame structure shall be made with Mild steel - Legs shall be made with metal plate of section 50x12mm while base & top frame made with metal plate of section 50mm x 8mm finished with multiple layers powder coating to give stained antique brass finish. The top of table shall be made with minimum 18mm thick black Ash wood or equivalent and second layer of mirror polished 12mm thick Ambaji white Marble (with continuous running veins) or equivalent with round chamfered edges covering table top leaving only narrow margin of black wood work top exposed. Concept: Metal understructure shall be made with continuous metallic plate of similar section which transform from base support plate to three supporting legs and follow the outer profile along the edge of square table top with corners rounded to avoid sharp edges. The metallic base of table and metallic undersupport of table top follow the exactly same layout. Stability: The structure of table shall be stable under generally applied loads on centre tables during intended usage against forces of overturning, bending and tension etc. of service loads and transportation loads, which is to be achieved by providing stable geometry and usage of suitable strength of material in table understructure and table top. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing centre table as per specification below: The frame structure of table shall be cylindrical geometry made with Engineered wood and exposed surface shall be CNC-cut grooved as per design and coated with Duco Paint. The top of table shall be made with mirror polished marble work with combination of 20 mm thick fine grained marble with supporting Engineered wood base and edges bevelled all as appoved by E-I-C. Stability: The structure of table shall be stable under generally applied loads on centre tables during intended usage against forces of overturning, bending and tension etc. of service loads and transportation loads, which is to be achieved by providing stable geometry and usuage of suitable strength of material in table understructure and table top. *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions : Length: 1200 mm, Width- 750mm & Height: 550mm Dimension tolerance : +/- 10mm. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Hand tufted woolen Rugs as per specification below: Material: Blend of wool fibres mixed with natural & synthetic fibres (Cotton & Polyster). Construction: Hand-tufted by skilled artisans Backing: Finely woven canvas Pile Height: minimum 10 mm (customizable), with medium to high knot density Design Motifs : Sleek and Intricate Patterns. Durability: High resilience, suitable for moderate to high foot traffic Colour scheme: Beige with contrasting threads Natural stain resistance Flame-retardant and hypoallergenic Eco-friendly and biodegradable Rich, vibrant color absorption *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions : 3050 mm x 2440 mm or as required at site. For measurement longer side face of partition table will be measured only. The colour & theme of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Lounge Chair as per specification below: The overall dimension of chair 760 mm L X 752mm W X 740 mm H x 420-500mm seat height. The complete frame structure shall be made with solid wood structure with Europeon Ash wood (or equivalent) legs and seat, backrest and armrest cushioned and padded with high resilience multidensity polyurathene foam of required thickness (Low density/Softer zones for comfort and plushness required in areas like shoulders/back contour and high density/firmer zones for support areas like seat and armrests). The same shall be upholestred with premium exclusive premium fabric of velvet or as approved fabric of approved colour. The wooden frame shall be finished with melamine polish to give natural/ antique look as approved by E-I-C. Design concept: Backrest shape neatly slanting to form side armrests while seating shape shall be square with round corners to form compact and cosy seating space. Outer (Backside) of barckrest and arm rest element shall be padded and covered with finely stiched leather/leatherette upholstry at joints to perfectly define edges of backrest such that Backrest and seat joins with seat at back side and remains open slitted at other two sides (between seat and armrest). Bottom Front of seat wooden understructure covered with padded leather/leatherette band of same colour as outer side of backrest and armrest. Cushion elements of backrest and seat remains seperate (both plush look). Aspect ratio-. Clearheight of seat bottom from floor, height of backrest from seat top and overall seat element thickness are equivalent. The legs shall be made of sleek wooden sections with melamine polish to give antique finish. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Sofa as per specification below: The three seater sofa made up of exclusive premium fabric of velvet or as approved, internal structure made in Solid wood with seasoned , klin dried European white ash wood base (or equivalent), finished in PU stain, machined from wooden log of 30 cm. Upholstry shall be buttery-soft premium fabric of velvet or as approved. The complete frame and wooden understructure shall be covered by high resilience multi density PU foam which be padded and cushioned(Low density/Softer zones for comfort and plushness required in areas like shoulders/back contour and high density/firmer zones for support areas like seat and armrests) . *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions :Length 1800 mm, Width 752 mm, Height 720 mm, Seating Depth 600mm, Seating Height 450 mm. Design concept: Entire sofs shall be assembly of two units designed with seperate supporing wooden ebony legs and wooden understructure which are mirror image of each other and blended smoothly at joining edge (assembled at site). Mid to low-back backrest shall continue in full profile to form the armrest of sofa shall be of two sleek curves (in vertical profile) meeting at seat height, while the seat shape shall be rectangular. The bottom of backrest and armrest shall continue to be at same level as the bottom of seat understructure. The armrest shall terminate just short of front edge of seat. Bottom of seat wooden understructure and back side (outer of backrest and armrest) shall be covered with same upholstry detail as cushioned seat, backrest and armrest elements to give plush tufted look. Aspect ratio-. Clear height from floor level to bottom of seat understructure (50-100 mm). Height of backrest from seat top is equivalent to overall seat element thickness. The legs shall be made of sleek wooden sections with glossy melamine finish. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge..

Supplying, fixing and placing centre table as per specification below: The frame structure of table shall be cylindrical geometry made with Engineered wood and exposed surface shall be CNC-cut grooved as per design and coated with Duco Paint. The top of table shall be made with mirror polished marble work with combination of 20 mm thick fine grained marble with supporting Engineered wood base and edges bevelled all as appoved by E-I-C. Stability: The structure of table shall be stable under generally applied loads on centre tables during intended usage against forces of overturning, bending and tension etc. of service loads and transportation loads, which is to be achieved by providing stable geometry and usuage of suitable strength of material in table understructure and table top. *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions : Length: 1500 mm, Width- 750mm & Height: 550mm Dimension tolerance : +/- 10mm. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Hand tufted woolen Rugs as per specification below: Material: Blend of wool fibres mixed with natural & synthetic fibres (Cotton & Polyster). Construction: Hand-tufted by skilled artisans Backing: Cotton with latex adhesive Pile Height: minimum 10 mm (customizable) with medium to high density knots for soft and push texture Design Options: Inspired by persian art motifs and patterns Durability: High resilience, suitable for moderate to high foot traffic Coloure sheme: Neutral beige Natural stain resistance Flame-retardant and hypoallergenic Eco-friendly and biodegradable Rich, vibrant color absorption *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions : 3050 mm x 2440 mm or as required at site. For measurement longer side face of partition table will be measured only. The colour & theme of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing 3 Seater Sofa as per specification below: The three seater sofa made up of exclusive premium fabric of velvet or as approved, internal structure made in Solid wood with seasoned , klin dried European white ash base (or equivalent), finished in PU stain, machined from wooden log of 30 cm. The complete understructure except minimalist metal sleek legs and bottom frame rail shall be covered by PU foam cushioned, the frame shall be padded and cushioned with high resilience multidensity PU foam of required thickness (Low density/Softer zones for comfort and plushness required in areas like shoulders/back contour and high density/firmer zones for support areas like seat and armrests). The complete inner cushion elements of seat, backrest and armrest shall be covered with premium exclusive premium fabric of velvet or as approved. Concept: Overall rectangular geometry of seat enclosed wholly in combined structural element of backrest which slantingly transforms to armrest at both sides.The top edge of backrest and armrest unit curved smoothly outwards of metal understructure frame below to impart plushness. A thin border of backrest and armrest element continuing and running around front seat element. The seat cushioning shall be three seperate cushions and similarly partition shall be formed in the cushion plush curves of backrest with well defined edges. Outer (Backside) of barckrest and arm rest element shall be padded and covered with finely stiched contrasting leather/leatherette upholstry at joints to perfectly blend at curves of outerside, and joints with inside (cushion). All curve lines, stright edges shall be in clean and smooth finish. The exposed metal structure (seat bottom frame) and round legs shall be powder coated antique brass finish Aspect ratio- Clearheight of seat bottom from floor and overall seat thickness are equivalent. Back rest shall be mid-back. Assmebled with bonded method. This includes all material, Hardware, fixture, rounding, chamfering , groove, cutting , moulding, finishing, polishing etc. *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions : Length 2175 mm, Width 970 mm, Height 790 mm, Seating Depth 600mm, Seating Height 450 mm. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Wild Flower Hand tufted woolen Rugs as per specification below: Material: Blend of wool fibres mixed with natural & synthetic fibres (Cotton & Polyster). Construction: Hand knotted and Hand-tufted by skilled artisans Backing: Cotton with latex adhesive Pile Height: minimum 10 mm thick low sheared pile (customizable) Design Options: Vintage look in motifs of balance of nature and modern life. Durability: High resilience, suitable for moderate to high foot traffic Natural stain resistance Flame-retardant and hypoallergenic Eco-friendly and biodegradable Rich, vibrant color absorption *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions : 2745 mm x 1830 mm or as required at site. For measurement longer side face of partition table will be measured only. The colour & theme of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Relax Chair as per specification below: The overall dimension of chair 525 mm W X 525mm D X 830mm H x 420mm seat height. The seat & back shall be made with solid Ash wood (or equivalent) structure padded and cushioned with high resilience mulidensity polyurathene foam of required thickness (Low density/Softer zones for comfort and plushness required in areas like shoulders/back contour and high density/firmer zones for support areas like seat and armrests). The same shall be upholestred with superior soft leatherette of approved colour. Concept: Exposed Base Metal framework runner at bottom of continuous circular backrest and armrest element is supported on sleek metal legs. The wooden understructure of circular shaped combined backrest and armrest element is housing the circular seat base and is cushioned. Second rectangular backrest element is provided above low back circular backrest to support back upto mid back level. Extra cushion pillow is provided for backrest fully covering rectangular back rest element. All seating, back rest and arm rest elements shall be covered in whole, from inner and outer (backside) surfaces with same upholstry The sleek metal legs and exposed base metal frame structure shall be made of metal with PVDF coating to give antique brass look. Legs shall be provided with studs at point of contract to ground. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Hand tufted woolen Rugs as per specification below: Material: Blend of wool fibres mixed with natural & synthetic fibres (Cotton & Polyster). Construction: Hand-tufted by skilled artisans Backing: Cotton with latex adhesive Pile Height: minimum 10 mm (customizable) Design Options: Intricate shapes inspired by traditional Oushak and Khotam motifs with primary colour in shade of gold. Durability: High resilience, suitable for moderate to high foot traffic Natural stain resistance Flame-retardant and hypoallergenic Eco-friendly and biodegradable Rich, vibrant color absorption *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions : 2745 mm x 1830 mm or as required at site. For measurement longer side face of partition table will be measured only. The colour & theme of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Swivel Chair as per specification below: The overall dimension of chair 890 mm W X 865mm D X 965mm H x 440 mm seat height. The seat & back shall be made with solid Ash wood (or equivalent) structure padded and cushioned with high resilience multidensity polyurathene foam of required thickness (Low density/Softer zones for comfort and plushness required in areas like shoulders/back contour and high density/firmer zones for support areas like seat and armrests). The same shall be upholestred with superior ecoleather of approved colour. The sleek four pronged pedestal shall be made of metal with PVDF coating to give antique brass look. Swivel Mechanism- Thrust bearing swivel mechanism Stability: The structure of chair shall be stable under generally applied loads on chair during intended usage against forces of overturning, bending and tension etc. of live loads and transportation loads, which is to be achieved by using stable geometry, appropriate swivel mechanism, and sufficient strength material in pedestal & base and design dia. of base.. Concept- Sleek curved, tall back and with seat mattress/cusion. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Hand tufted woolen Rugs as per specification below: Material: Blend of wool fibres mixed with natural & synthetic fibres (Cotton & Polyster). Construction: Hand-tufted by skilled artisans Backing: Cotton with latex adhesive Pile Height: minimum 10 mm (customizable) Design Options: Traditional design with branching patterns and florals Colour Scheme: Ivory border with honey gold, light green and stable brown tones. Durability: High resilience, suitable for moderate to high foot traffic Natural stain resistance Flame-retardant and hypoallergenic Eco-friendly and biodegradable Rich, vibrant color absorption *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions : 3660 mm x 2745 mm or as required at site. For measurement longer side face of partition table will be measured only. The colour & theme of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing round Coffee table as per specification below: Shape and Material. The table top shall be circular with cylindrical base. Understructure of table shall made with engineered wood cladded with 1.60 mm thick Aluminium sheet finished with powder coating & stained antique brass finish at table top edge and pedestal cladding. The top of table shall be bevelled metallic edge with table top of mirror polished 18mm thick plain white Ambaji marble resting on 18mm thick commercial plywood. At centre of table above pedestal projection shall be series of ripple formations carved in marble. The ripple pattern shall be originating from centre terminate shortly leaving most of other surface to table top for normal intended usuage. *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions : Table dia: 600 mm, base dia - 350-400 mm & Height: 450mm Dimension tolerance : +/- 10mm. Stability: The structure of table shall be stable under generally applied loads on centre tables during intended usage against forces of overturning, bending and tension etc. of service loads and transportation loads, which is to be achieved by stable geometry and using high density material at centre of table top in pedestal and base. The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing Hand tufted woolen Rugs as per specification below: Material: Blend of wool fibres mixed with natural & synthetic fibres (Cotton & Polyster). Construction: Hand-tufted by skilled artisans Backing: Cotton with latex adhesive Pile Height: minimum 10 mm (customizable) Design Options: Traditional Indian motifs in single colour with regal tomb pattern design at centre. Durability: High resilience, suitable for moderate to high foot traffic Natural stain resistance Flame-retardant and hypoallergenic Eco-friendly and biodegradable Rich, vibrant color absorption *As per approved drawings/reference image given in Technical Specification of Tender documents. Dimensions : 3050 mm x 2440 mm or as required at site. For measurement longer side face of partition table will be measured only. The colour & theme of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the VIP / Resereved lounge of Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer-incharge.

Please Enable Macros to View BoQ information