Work of Supply, Erection, Testing , commissioning of 3 Nos. 100KVA Distribution Transformer along with associated equipment at PWD Rest House, Paryecatta, Nuvem in V.P.Shristhal under Renovation and Improvement Scheme in SD-III, Canacona, Div.XVI

COST OF MATERIAL

Supply of 9.0 meters long R.C.C. Pole as per drawing No.CEE/E-565 Rev-3 and conforming to IS 785-1998 as amended upto date. The Component used for pole shall conform to following IS amended upto date. Ordinary Port land cement 53 grade : IS 12269 Aggregate : IS 383-1970 Torsteel : IS 1786-7985 MS bar : IS 432 P 1&2-1982 Erection includes transpotation, dragging of pole to the site of pit, clearing of bushes etc and excavation of pit of Size 0.60 x 0.60 x 1.5 mts in any type of soil classified under Soft Strata of Appendix A of CPWD-8 and back filling the pit after erection of the pole in pit by rubbleand excavated soil as shown in the Drg No. EE/IV/LT9.0RCC. ( Rubble is dealt seperately)

Supply of 7.5 meters long R.C.C. Pole as per drawing No.CEE/E-724 Rev 3 and conforming to IS 785-1998 as amended upto date. The Component used for pole shall conform to following IS amended upto date. Ordinary Port land cement 53 grade : IS 12269 Aggregate : IS 383-1970 Torsteel : IS 1786-7985 MS bar : IS 432 P 1&2-1982 Erection includes transpotation, dragging of pole to the site of pit, clearing of bushes etc and excavation of pit of Size 0.60 x 0.60 x 1.25 mts in any type of soil classified under Soft Strata of Appendix A of CPWD-8 and back filling the pit after erection of the pole in pit by rubble and excavated soil as shown in the Drg No. EE/IV/LT7.5RCC. ( Rubble is dealt seperately)

Supply of HDGI stay rod with plate complete for for 7.5 m long RCC pole as per technical specification. ( Rubble is dealt seperately)

Supply of Enamelled danger board as per DRG No. CEE/490

Supply of HDGI stay rod with plate complete for 9 m long RCC pole as per technical specification ( Rubble is dealt seperately)

Supply of HDGI L.A./S.A. cross arm clamps suitable for 7.5 RCC pole as per Drg No. CEE/E-524.

Supply of MS Distribution Box alongwith 12nos. 200A Kit Kat fuse and MCCB of 400Amps, 415 Volts. The box shall be fabricated with MS sheet 12 gauge with overlapping rain proof slit ventilators on both sides of the distribution box with wire mesh to prevent entry of insects with pin head door hinges locking arrangement and shall have required number of bus bars made out of Aluminium strips of size 40 x 10mm for connecting MCCB, fuses and cables (for 4 feeder arrangement) & other accessories. The box shall also have 'magnetic hold' arrangement to ensure that the box doors always remains in 'closed' positiion when shut even without latching.

Supply of 100KVA, 11/0.433KV 3 PH. Aluminium Wound Distribution Transformer level -II

Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith 20 kgs each salt, charcoal complete with brick masonary.