Loading…
Loading…
Tender Value
₹2.4 Cr
EMD Value
₹4.8 L
Closing Date
21 Oct 2026, 3:00 pm
Executive Engineer, BUILDING DIVISION GAYA
EE
EE, Building Division Gaya, BCD, Gaya
Superintending Engineer, BUILDING CIRCLE GAYA
SE
CONSTRUCTION OF S/F/F CUP BOARDMODULAR KITCHEN AND CURTAION ROD IN OFFICER'S FLAT 80 P.O. QUARTER IN GAYAJI FOR THE YEAR 2026-27
140593
NIT 15/2026-27
Open Tender
CIVIL
Gaya
• (a) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given. 481300.00 16.1
Bid Security Amount in Rupees Total Bid Security Amount in Rupees 481300.00
IFB
• (i) Legal Status of Bidder 4.3(a)
(ii) Place of Registration.
(iii) write Principal place of Business
(iv) Power of attorney of signatory Bid
• Total value of civil engineering construction work, in Rupees, Performed in last five years. minimum annual financial turnover (in all classes of civil engineering construction works only) amount of construction work of at least the equal to the 50 % of estimated cost of works for which bid has been invited. The turn over will be indexed at the rate of 8% for a year 4.5(A) (a)
2020-2021
2021-2022
2022-2023
2023-2024
2024-2025
• Amout in Rupees related to Work Experience of Similar nature Satisfactory completed at least one similar work of value not less than 50% of estimated Cost 4.5(A) (b)
• Minimum Quantities of work done as prime contractor in any one year during last five years, units shall be same as in Requirement column SL.No Items Unit Qty 50 % Qty
1.- Furniture Rs- 1,20,32,302.50
• Electrical License The contractor or his identified sub-contractor should possess required valid electrical license for executing the building electrification works and should have executed similar electrical works for a minimum amount as indicated in Appendix in any one year 4.5A( d)
• (a) Amount of Existing commitments and ongoing works in Rupees Sec 2-1.4(A)
(b) Amount of Work for which Bid already submitted, in Rupees Sec 2-1.4(B)
• Numbers and Maximum age of Equipments with bidder Type of Equipment Nos. Maxm. Age Sec 2-1.5
Concrete Mixer with Integral weigh Batching facility 5 1 NOS
Vibrator (Plate & Niddle) 5 2 NOS
Water Tanker 5 1 NOS
Steel shuttering 5 2000sft
NOT REQUIRED IN THIS PROJECT
• Name of the Personnel and Experince in years and Select from drop down list Personnel / Qualification 4.5(B) (b)
Site Engineer B.E. (Civil) + 03 Years Exp. (3 years in Building Construction) or Diploma in Civil + 7 year Exp. In Building construction or retired A.E. 1 No.
Site Supervisor Fresh Graduate in Civil or Diploma Civil + 02 Years Exp. or retired I.T.I Holder. 1 No.
• Evidence of accesses to Financial Resources in Rupees Evidence of access to or availability of creadit facilities (10% of estimated cost), certified by bankers (for work under this bid). 4.2(i)
• Proposed methodology and programme of construction Select from drop down list the proposed methodology and programme of construction, backed with equipment planning and deployment 4.3(l)
• Litigation History. Select from drop down list. Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. (Attached or not) 4.3(j)
• Affidavit Select from drop down list. Regarding statements made in the required attachments are true and correct. Sec-2, Affidavit
Undertaking Select from drop down list. Able to invest a minimum of cost upto 25% of contract value of work. During implementation of contract. Sec-2, Undertaking
• Registration No.
IT.& ST Registration & clearance Certificate
Labour License
Character Certificate
NOC for Debar (If required)
CIVIL
PERCENTAGE
L1
1
10 documents required · 10 mandatory
₹10,000
Processing Fee: 5900
₹4.8 L
01-10-2026 03:00 pm AT OFFICE OF SE GAYA CIRCLE, BCD PATNA
24 Sept 2026
24 Sept 2026
22 Oct 2026
24 Sept 2026
21 Oct 2026
24 Sept 2026
1 Oct 2026
BILL OF QUANTITY FOR S/F/F CUP BOARDMODULAR KITCHEN AND CURTAION ROD IN OFFICER'S FLAT 80 P.O. QUARTER IN GAYAJI FOR THE YEAR 2026-27 (For 80 Unit)
Estimated cost - Rs.
Earnest money - Rs.
Cost of B.O.Q.-- Rs.
Time of Completion -
Date of Tender --
Sl. No. CODE ITEM OF WORK QTY. UNIT RATE (Rs.) Amount (Rs.)
1 AR WARDORB WITH LOFT UNIT Size 1530W x 3050H x 5200 The wardrobe shall be made using 18mm thick boards with zero gap and no overlap using EL calibrated technology along with an anti fungal and antibacterial coating. The internal carcass shall ball constructed form BWP 710 grade plywood in a Fr. White linear finish. The front shutter panels shall be finished with 1 mm thick suede laminate in the selected color applied using a hydrulic press machine with the marine grade adhesive to ensure water resstance all pnels shall be cut using a beam saw machine for precise sixzing. The edges of teh shutter panels shall be sealed with 2 mm thick PVC edge banidng while the reamining carcass panels shall be sealed with 1 mm thick PVC edge baniing using hot melt glue for enhanced durability andd strength. Alll PVC edges shall be machine rounded to eliminate sharp corners. All cabinets shall be assemble using minifix fittings and wooden dowels. The wardrobe shall include one internal drawer with lock a hanger rod with fittinghs and shelves in the lower section of each partiotion hinges shaa be fixed using 5 mm PVC (As per Estimate) sqm 1400
2 Modular kitchen base units and loft units shall be manfactured using 18 mm thick calibrated E1 grade plywood (BWP 710 grade) with anti fungal and anti bacterial coating. All panels shall be cut and processed using a CNC panel saw machine to ensure dimensional accuracy and zero gap[ ( no overlap) construction Carcass & Internal Finish The internal carcass will be finished with frosty White linear laminate pasted using a hydrulic hot press machine with marine grade adhesive (Fevicol Marine or equlvalent) to ensure moisture resistance and long term bonding. Shutter Panel - Front shutters will be made suing 1 mm thick high gloss laminate in the approved color Laminate pasting shall be done using a hydralic press machine under controlled pressure and temperative far a bubble free finish. Edge Banding Shutter edges will be finshed with 1.3 mm high gloss edge banding using an automatic edge banding machine with hot melt glue Carcass edges will be sealed with 1 mm thick PVC edge banding using the same machine All edges will bge trimmed and polished using a trimming and buffing unit and corners will be rounded to avoid sharp edges Drilling & Jionery All drilling for hardware (thinges, Minifix, dowels) will be done using a multi boring machine to maintain presion and allinment cabinerts will be asse3mbled using minifix connectors and wooden dowels ensuring strong and knock down construction (As per Estimate) sqm 2645
3 9.46.2 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. `brass screws and wooden plugs, etc., wherever necessary complete 20 mm dia metre sqm 397.7
5.36% gst on scheule items
Executive Engineer Building Division, Gaya Ji 24236800
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT 15 2026-27.pdf
NIT • 1.72 MB
NIT 15_SBD.docx
NIT • 0.44 MB
34902_CHECK LIST AND OTHER DEPARTMENT LETTERS.pdf
NIT • 6.73 MB
S F F CUP BOARD MODULARE KITCHEN 80 PO (2).xls
NIT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .