Constrution of ZP School 1 Class Room Rajur AT RAJUR Tal S SOLAPUR Dist SOLAPUR

Excavation for foundation in earth, soil of all types, sand, graval and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreding as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. ( LIFT UP TO 1.5 M.) SSR Item No. 21.02 Spec. No. Bd A1 P.No. 259

Excavation for foundation in earth, soil of all types, sand, graval and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreding as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. ( LIFT UP TO 1.5 M. to 3.00m) SSR Item No. 21.04 Spec. No. Bd A1 P.No. 259

Providing dry trap/granite/ quartzite/ gneiss stone soiling 15cm.to 20cm.thick including hand packing & compacting and etc. Comp. SSR Item No.21.38, Sp.No.Bd-A 12 P.No.264

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR Item No.24.01 Sp.No. Bd.E.1 P.No. 287 without Scada

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR Item No.25.11 Sp.No.Bd.F.3 P.No.298 & B.7 P.No.38 ( Without Scada )

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR Item No.25.31 Sp.No.Bd.F.5 P.No.300 & B.7 P.No.38 ( Without Scada )

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR Item No.25.50 Sp.No.Bd.F.6 P.No.300 & B.7 P.No.38 Without Scada

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR Item No.26.05, Sp.No.Bd.F.6 P.No.300 & B.7 P.No.38 Without Scada

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR Item No.26.17 Bd.F.11 Page No. 304 and B.7, Page No. 38 Without Scada

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR Item No. 25.70, Sp.No. Bd.F.8 Page No. 302 and B.7, Page No.38 ( Without Scada )

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.SSR Item No.27.01 , Spec. No. Bd G1 P.No. 313

Providing Ilnd class Burnt Brick masonary with conventional type bricks in CM 1:6 in Superstructure including striking joints, racking out joints ,watering and scaffolding compete. SSR Item No. 27.05 , Spec. No. Bd G5 P.No. 315

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.SSR Item No. 26.33 , Spec. No. Bd F17 / 306

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. SSR Item .No. 21.37 , Spec. No. Bd A 11 P.No. 263

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. SSR Item No.32.01 sp.No.Bd-L-1P.No.367

Providing cement plaster 12mm thick in single coat in CM1:5 without neeru finish to concrete or brick srfaces in all positions including scafolding and curing etc. Complete. SSR Item No.32.03, Spec. No. Bd L 2 P.No. 368

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete SSR Item No.32.06 Spec. No. Bd L 4 P.No. 368

Providing neeru finish to Plastered surfaces in all positions including scafolding and curing etc. complete. ( Excluding ceiling ) SSR Item No.32.15 Spec. No. Bd L 10 /370

Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete.SSR Item No.33.01 Sp.No.Bd-M-1, P.No.379

Providing and laying vitrified mirror / glossy finish tiles of size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickn and confirming IS 15622 - 2006 ( Group Bia ) of approved make,shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float ,filling joints with cement slurry curing and cleaning etc. complete. SSR Item No.33.40, Flooring

Providing and laying mirror / glossy finish tiles of size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickn and confirming IS 15622 - 2006 ( Group Bia ) of approved make,shade and pattern for Skirting in required position laid on a bed of 1:4 cement mortar including neat cement float ,filling joints with cement slurry curing and cleaning etc. complete. SSR Item No.33.41 b)Skirting

Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. S.S.R. Item No.33.20

Providing and fixing double leaf steel door without ventilator icluding shutter of M.S.frame of angle 50 x 50 x 6 mm & shutter frame of angle size 30 x30 x6 and shutter sheet of 18 gauge of approved quality with hold fast iron necessary fixtures and fastening with oil painting three coat including primer coat complete as per detailed drawing and as directed complete. As per R.A.

Providing and fixing mild steel grill work for windows 15Kg / Sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting etc. complete.SSRItem No.40.02 ,Sp.Bd-U-1 /p.No.537

Providing and fixing steel window of various sizes as per detailed drawing without ventilator and steel frame of angle size 40 x 40 x 5 mm & shutter frame of angle size 25 x25 x5 and fixtures and fastening with oil painting three coat including primer coat complete ( including M.S.guard bars of 12 mm Sq. 10 cm c/c and M.S.flat of 40 x 6 mm ) As per R A

Providing and applying priming coat concrete/ masonry surface and asbestos cement sheets,plastersd surfaces, including scaffilding and preparing the surface by throughly cleaning oil,grease,dirt and other foreign matter,sand preparing as required.SSR Item No.35.21, Sp.As directed by Engr.

Providing and applying Plastic emulsion paint of approved colour and shade to old and new surfaces in two coat including scaffolding, preparing the surfaces (excluding the priming coat.) complete.SSR Item No.36.12 Sp. Bd.P.6 P.No.414

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.SSR Item No.35.26

Providing and fixing Information sign board of size 0.90 m x 0.60 m. prepared on 18 gauge M.S. sheet with horizontal bracing of angle iron frame of size 25x25x5 mm including painting with one coat of zinc cromate primer and two coats of oil painting including two angle iron post of size 50x50x5 mm of 2.40 m. long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 45 cm x 45 cm x 45 cm size as directed by Engineer-in-charge etc. complete. As per RA

Add For Royalty Charges for Sand

Add For Royalty Charges for other material

Test of Bricks - Water Absorption (set of 5 Bricks ),Compressive strength,Efflorescence (set of 5 bricks )

Test of Concrete -Compressive Strength of C.C.Cube (set of 3 cubes)

Basic Test of Aggregate - Siive Analysis

Test of Steel upto 16 mm dia.-Tensile strength,%Elongation,Yield stress,weight per meter,Bend/Rebend test,Proof stress

Add for GST Charges