Repair and Maintenance of fisheries office cum workshop at Chetlat at Chetlat

Demolishing cement concrete manually/ by mechanical means including disposal of material with in 50 metres lead as per direction of Engineer in charge. 1:4:8 or leaner mix

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Taking out doors, windows and clerestory window shutters(steel or wood) including stacking within 50 metres lead: Of area 3 sq. metre and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material with in 50 metre lead.For thickness of tiles above 10 mm and upto 25 mm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement:4 coarse sand(Zone111):8 graded stone aggregate 40mm nominal Size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35mm thick shutters

Providing non-asbestos high impact Polypropylene reinforced cement 6 mm thick corrugated sheet (As per IS:14871) roofing upto any pitch and fixing with polymer coated J or L hooks,bolts and nuts 8 mm dia G.I.plain and bitumen washers or with self drilling fastner and EDPM washers etc complete.

Providing and fixing ridges and hips in non-asbestos fibre cement high impact polypropylene reinforced roofing with suitable fixing accessories or self drilling fastener and EDPM washer etc complete corrugated serrated adjustable ridges.

Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness. The lock ail made up of’H’ section, a UPVC hollow section of size 100x24 mm and 2 mm ± r 0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a UPVC multi-chambered single panel and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers,complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded5mm rigid PVC foam sheet m itred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S.square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge.

12mm cement plaster 1:6(1cement 6M sand)

15mm cement plaster 1:6 (1 cement : 6metal sand) on rough side of single or half brick wall

Providing and laying vitrified floor tiles in diffren sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08% and confirming to IS: 15622 of approved brand and manufacture in all coulers and shades, in skirting,rises of steps laid with cement based high polymer modofied quick set tile adhesive (water based) conforming to IS 15477,in average 6mm thickness including grouting the joints etc.. complete.(Khajaria polished vitrified tiles or equivalent) Size of tiles 800x800 mm

Providing and laying vitrified floor tiles in diffren sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08% and confirming to IS: 15622 of approved brand and manufacture in all coulers and shades, laid with cement based high polymer modofied quick set tile adhesive (water based) conforming to IS 15477,in average 6mm thickness including grouting the joints etc.. complete.(Khajaria polished vitrified tiles or equivalent) Size of tiles 800x800 mm

Providing and fixing ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacture ) of first quality confirming to IS:15622 of approved make,in colours such as White ,ivory,Grey,Fume red brown,laid on 20 mm thick cement mortar 1:4 ( 1cement, 4 metal sand ) and joining with white cement and matching pigment etc...complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing anf fixing white vitrous China water closet Pedestal pan(European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap

Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore 90 mm long

Providing and fixing PTMT stopcook of approved quality and colour.20 mm nominal bore 89 mm long

Providing and fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers.

Providing and Fixing PTMT towel rail with brackets fixed to wooden cleats with CP Brass screws with concealed ritting arrangement of approved quality and colour.600 mm long towel rail brackets with total length of 645 mm,width 78mm and effective height of 88 mm ,weighing not less than 190 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work including cutting chases and making good the walls etc.)25 mm nominal outer dia .Pipes.

Painting with SE paint of approved brand and manufacture or required colour to give an even shade One or more coats on old work

Providing and fixing Aluminium sliding door bolts,ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868),transparent or dyed to required colour or shade,with nuts and screws etc..complete300x16 mm

Providing and fixing Aluminium tower bolts,ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868),transparent or dyed to required colour or shade,with nuts and screws etc..complete250x10 mm

Providing and fixing Aluminium handles,ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868),transparent or dyed to required colour or shade,with nuts and screws etc..complete100 mm

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Wall painting with acrylic emulsion paint having VOC (Volatile organic compound)content less than 50 grams/litre of approved brand & manufacture including applying additional coats wherever required to achieve even shade & colourTwo coat

Providing and placing on terrace (at all floor levels) polytheve water tanks IS:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet and over flow pipes.500 litre