Construction of PWD GUEST HOUSE AT CHUSHUL.

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m Sq. on plan) including disposal of surplus excavated earth, as directed by Engineer-in-Charge (incl dewatering if required ). All kinds of soil :

Supplying and laying of quarry stone soling hand packed tightly incl ramming watering and filling of interstices incl all carriage complete job

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) including carriage complete job

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Supplying and filling RBM under rooms incl. compaction by ramming watering etc all carriages complete job

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) including carriage complete job

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl. carriage complete job

Reinforced cement concrete work in beams, suspended floors, columns roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including carriage complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage complete job

Centering and shuttering including strutting, propping etc. and removal of form for : a)Foundations: footings, bases of columns etc. for mass concrete.

b)Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

c)Suspended floors, roofs, landings, balconies and access platform.

d)Lintels, beams, plinth beams, girders, bressumers and cantilevers.

e)Columns, pillars, piers, abutments, posts, and struts.

f) Edges of slabs and breaks in floors and walls Under 20 cm wide

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. including carriage complete job

Providing and Constructing cement stabilized mud block masonry (mud block made out of soil containing 60% to 70% of sand and 10% of clay and 5% of cement pressed using manual machine) in cement mortar 1:4 in walls. The size of the block is 305x143x100 mm. laid in course cement mortar as per the direction of Engineer in-charge

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class imported kail wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). including carriage complete job

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood (35mm Thick)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick First class kail wood

Providing and fixing 5.0 mm thick glass pannes in partition or door shutters as required incl beeding of required shape and size cjob

Providing and fixing aluminum tower bolt with the body of aluminium die cast with electrophoretic lacquer finish , should have 10mm SS rod which insures high durability, should have aluminium die-cast Knob with matte finish . Receptacle should be of die cast aluminium with electrophoretic lacquer finish.Ball & Spring made of steel with matte finish. (Makes: Dorma, Godrej, Hettich) incl carriage c job 200x100mm

Providing and fixing of Main Door Locks, it should have EXS technology with 2 billion combinations for better security,should have indicator to know whether the lock is open/closed. Should be provided with the privacy knob for complete privacy,Specs:- Body & Receptacle should be made of Mazak with PU finish.Cover Plate should be of CRCA with the Nickel-Chrome platedKeys should be made of Nickel Silver and nickel plated.Should be available for both inside opening and outside opening. Must be suitable for the door thickness ranging 25mm-90mm.Backset -69mm Warranty of the product should not be less than 15 years (Makes: Dorma, Godrej, Hettich)

Providing and fixing of Mortise lock with 5 pin hard brass mechanism to ensure durability and having corrosion resistance components to ensure long lasting performance.Specs : Cylinder Technology :- Pin Cylinder (5 Pin)Security Level : L1, profile : europrofileKey combination : 900, Material : Cylinder Housing : Mazak, Cylinder : Mazak, Knob: Mazak, Key : Brass, Cylinder Pins : Brass.Reversible Keys : Not required, Size : 60, 70mmTesting Lfe cycle : Should be 50,000, Finish : Satin Mortise should have single door lock body with backset of 50mm, centre distance-85mm ,50mm , forend plate size:176mm, 238m, testing life cycle of 50,000.Material : Latchbolt-Mazak, Deadblt-Mazak, Stricker Plate-CRCA, Forend plate-CRCA. No.of dead bolts : 1Handlle :-Lock body should be Eco and coover plate of CRCA, with main handle made of Mazak, Latchbolt-mazak, Deadbolt-Mazak, Stricker Plate- CRCA, Forend Plate-CRCA, with Door thickness- 28-40mm and finish of Satin , antique Brass (Makes: Dorma, Godrej, Hettich)

Providing baby latch for bathroom with the backset of 45mm and Forend plate size of 80 with the testing life cycle of 50,000. Material of the baby latch should be made of Mazak , Deadbolt and Stricker Plate of CRCA. (Makes: Dorma, Godrej, Hettich

Providing and fixing Door Closer, it should have sleek and compact design to enhanced Interiors and doors aesthetic appeal, door ; must have vacuum seal for no oil leakage.Provides long lasting surface that is not prone to wearing and have polyurethane (PU) finish.Sooth functioning in any climate condition-10 dergree to +50 degree C. Ensures fool-proofing against oil leakage with non removal speed control valves.Power Size : 3 Max door weight : Should not be less than 60kgsMax Door Width : 950mm Adj Latching speed and Adj closing Speed: Yes Life Cycle : Should not be less than 1 lakh (Makes: Dorma, Godrej, Hettich)

Providing and fixing of Door viewer on the Main Door (180 Deg view) Brass SS finish (Makes: Dorma, Godrej, Hettich)

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Single rubber stopper

Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive and other allied fixing material to fix it properly on base complete job

Supply, Installation, Testing and Commissioning of uPVC Mahagony shade or approved shade (wood finish) casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.50 ± 0.2 mm thick steel with ZincAl coating made from roll forming process of required length (shape & size according to uPVC profile), uPVC co-extruded extruded glazing beads of appropriate dimension, stainless steel (SS 304 grade) friction hinges of 2.5mm plate thickness, zinc alloy (white powder coated) casement handles of same brand as window supplier, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary coated steel steel screws etc. The profiles should be mitre-cut and seamlessly Zip-welded without needing corner cleaning. Both the shutter and bead profiles should have co-extruded gaskets in the glazing area. The frame and shutters should have EPDM gaskets in the sealing area. Mullion (if required) shall be fixed through Mechanical joint including drilling of holes for fixing hardware's and drainage of water etc. The vertical member should not deflect more than L/175 or 19mm for SGU and L/175 or 15mm for DGU, whichever is the least for a wind load of 1.5kPa. After fixing frame the gap between frame and adjacent finished wall shall be filled weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: For uPVC frame, sash and mullion extruded profiles minus 1% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Friction stay should open to allow cleaning of glass outside surface. Multipoint locking to be provided with espags of SS304 grade. All shims to be capable of transferring the load evenly and made of a suitable material (Teflon, Nylon etc) capable of lasting the life span of the system. All miscellaneous items such as peripheral sealants, backer rods, fasteners etc to be included in the rate. (Makes: Rehau uPVC, Saintgobain uPVC, Schueco uPVC) a)Casement window single panel with S.S. friction hinges (16.5mm stack height) made of 44x70mm depth frame and 80x70mm depth shutter having wall thickness of 2.3 ± 0.2 mm and glazing bead of appropriate dimension. DGU unit of combination 6mm toughned glass+12mm thick air gap+6mm thick clear toughned glass. Outer 6mm glass pane will have special energy saving Magnetron coating on clear glass base on the air gap face to achieve a U-value of 1.5 W/m2-K (Area of window above 0.75 sqm.) and a visible light transmission factor of 70 to 80%. (Makes: Rehau uPVC, Saintgobain uPVC, Schueco uPVC)

Providing and fixing ladakhi ornamental shingstaks of required size and shape as approved by EIC over windows incl cost of fixing complete job

12 mm cement plaster of mix :1:4 (1 cement: fine sand) including all lifts,leads,carriage of the material. including carriage complete job

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand).including all lifts,leads,carriage of the material. Complete job

Providing wood work in frames of false ceiling, partitions, underneath pannelling etc. sawn and fixed in position :Budloo / Fir wood

Providing and fixing 25mm thick wooden planks ceiling (frames work to be paid for saprately)with m.s screw 1st class silver kail

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral waterproofing compound by weight of cement and finishing neat.With common burnt clay (non modular) brick tiles of class designation 10.0

Thermal Insulation in wall with Expanded polystyrene fixed with suitable adhesive to the outer wall as per the directions of the Engineer-in-charge

P/F of Imported Readymade wooden floor panneling of6mm-8mm thick of approved brand and quality over 4-6mmthick PVC thermalcoal foam incl P/F of matching imported wooden Cornice beeding for edges over panneling whereever required incl cost of fixing material and cost oflabour comp. job

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such Kilogram as nuts, bolts, fasteners etc. including lifts, carriage of the material complete job

Providing and laying Antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 300mm x 300mm incl carriage cjob

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes reparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.incl carriage cjob

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (300mm x 450mm)

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, staircase risers and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade incl skriting wherever required cjob (18mm Thick) incl carriage cjob

Providing edge moulding to 18 mm marble stone counters, Vanities etc.including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge (Granite Work) Double moulding c job

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. ( 2mm Thick)incl carriage cjob

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre incl carriage cjob

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (Two or more Coats ) incl carriage c job

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm incl carriage cjob

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). incl carriage cjob

Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work. incl carriage cjob

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position including welding etc and applying a priming coat of approved steel primer all complete. incl carriage cjob

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. incl carriage cjob

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including all lifts,leads and carriages complete job

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) incl carriage complete job

Providing and fixing plained eaves boarding. 2nd class Kail Wood 300x40 mm (nominal size) complete job

Providing and fixing of soffits made out 12mm thick imported wood planks incl underneath frame work and scaffolding carriage complete (Badloo work ) incl carriage cjob

Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separatelyChaar Gul incl carriage cjob

Providing and fixing 12mm thick wooden imported panneling in , wall linning etc incl cost of fixing material complete incl carriage cjob

french spirit polishing, Two or more coats on new works including a coat of wood filler Complete job.

Providing and fixing 50mm x 50mm wooden moulded corner beading of triangular shape to the junction of panneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete

Providing and laying vitrified floor tiles in differet sizes (thickness to be specified by the manufacturer0 with water absorption less than 0.08% and conforming to IS:15622 of approvedmake, in all colours and shads, laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand0 including grouting the joints with white cement and matching pigments etc. complete Size of tile 600 x 600 mm incl. carriage c job.

M/S GHULAM MOHD BALDER