NIT No. 25 item No. 2 (2025-26) EE (T)/EE(EnM)M-5

Supply of submersible pump set fitted with dynamical balanced E P impeller mounted on stainless steel shaft protection sleeve EP stage bowl of closed grained shorted type impeller. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM, suitable for operation on 3 Ph., 415 ±5% Volts, 50 Hz, AC power supply having, Motor Power : 7.5 HP, Stage: 10, Pump head range: 73-90-95 Mtr, Discharge range: 300-200-125 LPM,. Make: BS/SU/ DJB Approved Make

S/o PVC insulated flat submersible cable with copper conductor having three core Size 4 sq mm 1100 volts (100mtr per roll) Make- Gloster/Universal/Havells/DJB Approved

S/o G.I Pipe 50mm dia medium with GI flange welded in both side 03 mtr long with ms strip complete with threading work on each side of pipe each flange should be 4 holes and cut for cable.make- ISI Mark

S/o G.I Tail piece 50mm dia medium class 1.5 mtr long complete with one end threaded and one end welded with flange Make- ISI Mark

S/o MS clamp for holding 50 mm dia pipe 600mm long and 12 mm thick holding the pipe the complete with nut bolt and washer.

S/o rubber indertion jointing sheet conforming IS 638/79 with ISI mark 1.5 mm thick make- Jyoti or any other make approved by DJB

S/o required off size threaded nut bolts of good quality.

Supply of MS bore cover 8 mm thick suitable for 200 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 50 mm dia hole in the center

Supply of canvas hose pipe 50 mm dia 30 Mtr long. Make Jyoti/ISI

Supply of canvas hose pipe 80 mm dia 30 Mtr long. Make Jyoti/ISI

S/o GI bend with both ends having welding flanges of size 50 mm dia. Make of flange- ISI, Make of pipe Jindal /tata /DJB approved.

S/o 63 amp 4 pole, 10k ,ELCB 415 volt, DJB approved .

Installation of above equipments at site work includes transportation manpower safety measures etC. as required at site & testing/commissioning complete.