Construction of community hall Seripora near Jama Masjid, Thatharka

Amount

General Site clearance,including levelling of ground ,if any including disposal of mulba complete job.

Earth work in Bulk excavation by manual means in trenches for foundations, drains,(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50 meters and lift upto 1.5 m in all kinds of soils

Providing and laying in position cement concrete (1:5:10)mix in foundation &plinth using 40mm Nallah stone aggregate excluding shuterring including all carriages with leads and lifts complete job

Providing and laying in position cement concrete (1:3:6)mix in foundation &plinth using 20mm Nallah stone aggregate excluding shuterring including all carriages with leads and lifts complete job

Random Rubble masonry with hard stone in foundation and plinthincluding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarsesand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand) Quarry including all carriages complete job

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing including all carriages complete job

Filling with availaible excavated earth(Excluding rock) intrenches,plinth,sides of foundation etc in layers not exceeding 20cm in depth,consolidation each deposited layer by ramming and watering lead upto 50m complete job.

Brick work with common burnt clay (non-modular) bricks of classdesignation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)including all carriages complete job

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm N. size) including all carriages with leads and lifts complete job

Reinforcement for RCC work including straightening,cutting bending, placing in position and binding all complete upto plinth level Thermo Mechanical Treated bars including all carriges

Centring and shuttering including strutting propping etc. and removal of form for :-Walls ( any thickness ) including attached pilasters , butteresses , plinth and string course ( inciuding carriages)

Suspended floors, roofs, landings, balconies and access platforms.

Lintel, beams, plinth beams, girders, bressumers and cantilevers. Columns, pillars, piers, abutments, posts and struts.

15mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

6mm Cement plaster of mix:1 : 3 ( 1 cement : 3 fine sand)

Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including groutingthe joints with white cement and matching pigments etc. completeSize of tile 600x600 mm

Providing wood work in frames of doors, windows, clerestory windowsand other frames, wrought framed and fixed in position with hold fastlugs or with dash fasteners of required dia and length (hold fast lugs orwith dash fasteners shall be paid for separately):Second class deodar wood cum including all carriages complete job.

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of requiredsize with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class deodar wood 35mm thick

12mm thick plain grade-I medium density flat pressed three layer particle board FPT-I including all carriages complete job.

Providing and fixing glazed shutters for doors, windows and clerestorywindows using 4mm thick float glass panes including ISI marked M.S.pressed butt hinges bright finished of required size with necessaryscrews.Second class deodar wood 35mm thick

Providing and fixing wire gauze shutters using galvanized M.S. wiregauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISImarked M.S. pressed butt hinges bright finished of required size withnecessary screws as per direction of Engineer-in-charge :Second class deodar wood 35mm thick

Providing and fixing wooden moulded beading to door and window frames with iron screws,plugs and priming coat on unexposed surface etc complete job.

Providing and Fixing alumunium sliding door bolts ISI marked anodized(anodic coating not less than grade AC10 as per IS:1868 complte job.

Providing and Fixing alumunium Tower bolts ISI marked anodized(anodic coating not less than grade AC10 as per IS:1868 complte job.

Providing and Fixing alumunium Handles ISI marked anodized(anodic coating not less than grade AC10 as per IS:1868 complte job.

Providing and Fixing alumuniumHanging floor door stopper ISI marked anodized(anodic coating not less than grade AC10 as per IS:1868 complte job.

Providing and Fixing bright finished brass hard drawn hooks and eyes complte job.

Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete.2mm thick

Distempering with 1st quality acrylic distemper (ready mixed)havingVOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as permanufacturer’s specifications

Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Wiring for light/fan/exhaust fan point/call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/reccessed medium class pvc conduits with modular switch plate and plates complete job.

Wiring for circuit/submain wiring alongwith earthwire the following sizes of FRLSPVC Insulated copper conductor single core cable complete job.

Supplying and fixing two module steeped type electronic fan regulator on the existing modular plate required,switch box including connections but excluding modular plate.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular palte as required. but excluding modular plate.

P/F of MV Danger notice plate of 200x150mm made of mild steel at least 2mm thick in single red color on front side as required

Supply of LED batten 18W

Supply of exhaust fan wall/ceiling fans 230v 50hz ceiling fan with double ball bearing with low power consumption of following sweeps.

Provision for sign board and photographs (Paid as per actual)