REPAIRS AND REPLACEMENT OF FOOTPATH SEWAGE LINE, SEPTIC TANK, MANHOLE COVERS AND CLEANING/DESLUDGING OF SEWAGE LINE, MANHOLES, SUMPS, SEPTIC TANK/ SOAKAGE WELL AT GE E/M BASE HOSPITAL AREA INCLUDING COVID ZONE UNDER GE E/M BHDC-10

Amount

Cleaning of sewage pipe line up to 150 mm internal dia, at any depth, by rodding and removal of sludge/ silt/ liquid/ mud and sand etc (in foul position) out side MOD premises including provision of water, bamboo, etc complete all as specified and as directed.

Cleaning manholes of any size up to 1.50 metre in depth and removal of sludge / slit / mud and sand etc (in foul position) out side MOD premises complete all as specified and as directed.

All as per srl item No. 2.00 here in before but depth exceeding 1.50 metre complete all as specified and as directed. Notes for item Nos 1.00 to 3.00:- (i) A panel recovery of Rs 500.00 per complaint per day shall be imposed on contractor for not cleaning of sewage line/manhole within 24 Hour of intimating the complaint to contractor by JE in Charge. (ii) A record for each complaint shall be maintained by the contractor duly signed by the Engr-in-Chare. (iii) The Engr-in-Charge shall submit necessary certificate alongwith RAR/ Final Bill in this regard that all complaints have been attended in time.

M&L for cleaning of manholes/Septic tanks/soakage pits/etc of any size and depth by hydraulic operated high pressure suction sewer cleaning machine having suitable tank cap including skilled driver operator & labour and removal of sludge / silt / liquid / mud in foul position and disposing the same out side MOD premises complete all as specified and as directed. Note: (i) Volume of sludge to be dispose off, shall be measure for payment purpose. (ii) A panel recovery of Rs 10000.00 per complaint per day shall be imposed on contractor for not cleaning of manholes/septic tanks/soakage pits/etc by mechanical operated high pressure suction sewer cleaning machine within 7 Days of intimating the complaint to contractor by JE in Charge. (iii) A record for each complaint shall be maintained by the contractor duly signed by the Engr-in-Chare. (iv) The Engr-in-Charge shall submit necessary certificate alongwith RAR/ Final Bill in this regard that all complaints have been attended in time.

M&L for cleaning of chocked sewer line of dia 100 mm to 300 mm in any depth by hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of 3000 litres and 260 LPM with minimum 145 bar, suction flow of 10200 LPM including skilled driver & operator supervising Engineer for cleaning of chocked sewer line including providing water for jetting and removal of sludge/silt/liquid / mud and sand (in foul position) etc out side MOD Premises complete all as specified and as directed. Notes: (i) Length of Sewer line from manhole to manhole shall be measure for payment purpose. (ii) A panel recovery of Rs 15000.00 per complaint per day shall be imposed on contractor for not cleaning of sewer line by mechanical operated high pressure suction sewer cleaning machine within 7 Days of intimating the complaint to contractor by JE in Charge. (iii) A record for each complaint shall be maintained by the contractor duly signed by the Engr-in-Chare. (iv) The Engr-in-Charge shall submit necessary certificate alongwith RAR/ Final Bill in this regard that all complaints have been attended in time.

Excavation in trenches not exc 1.50 metre wide or 10 Sqm on plan, 1.50 metre in depth for manholes & sewage lines, drain, etc and getting out in soft/loose soil complete all as specified and as directed.

All as per srl item No. 6.00 here in before but depth exceeding 1.50 metre and not exceeding 3.0 metre complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick, in any type of soil complete all as specified and as directed.

M&L for removing excavated soil to a distance exc 500 metre and not exc 1.0 Km and depositing where directed complete all as specified and as directed.

Supply, laying, jointing and testing 150 mm internal dia Salt glazed stone ware pipes, with collars, drain pipes laid in trenches and jointed including taking down old pipe with PCC haunching & bedding complete all as specified and as directed.

All as per srl item No.10.00 here in before but internal dia of pipe 200 mm complete all as specified and as directed.

All as per srl item No.10.00 here in before but internal dia of pipe 300 mm complete all as specified and as directed.

M&L Plain cement mortar concrete 1:3:6, type C-2, using 40 mm graded crushed stone aggregate, as in bed to drain pipes including packing under, and haunching against the sides of 150 mm dia pipe, after they are laid and tested complete all as specified and as directed.

All as per srl item No.13.00 here in before but internal dia of pipe 200 mm complete all as specified and as directed.

All as per srl item No.13.00 here in before but internal dia of pipe 300 mm complete all as specified and as directed.

Demolition of brick work built in cement mortar of any description complete all as specified and as directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan not exc 6 metre mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M/L for brick work with sub class 'B', straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15 cm thickness (below or above ground level) complete all as specified and as directed

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channel and drain all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate, as in sub base, foundation, filling & mass concrete complete all as specified and as directed.

M&L for designer Cement concrete chequered tiles, 30cmx30cmx25 mm thick with grey cement & pigment, Rubber moulded finish, set & jointed over and including 15 mm thick screed in Cement mortar 1:6 complete all as specified and as directed.

M&L for cement concrete 1:2:4, type B-1, using 20 mm graded crushed stone aggregate, as in coping, sides of paver blocks, sides of chequered tiles, benching, manhole channel etc including necessary form work as required complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and as directed.

M&L Reinforced cement concrete as in landing slabs in cement concrete (1:1.5 :3), type A-1, using 20 mm graded crushed stone aggregate including necessary form work, etc complete all as specified and as directed.

M&L for mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape as required, including cranking, bending spirally for hooping for columns, hooking and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

All as per srl item No. 27.00 here in before but 6 mm to 8 mm dia bars complete all as specified and as directed.

S&F 70 mm thick factory made, manhole covers of precast reinforced cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate, (Square/rectangular/circular) with and including 8 mm dia TMT bars @ 10mm centre to centre, both ways, as in reinforcement and placed over manholes at site including lift hook complete all as specified and as directed.

S&F 100 mm thick factory made, manhole covers of precast reinforced cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate, (Square/rectangular/circular) with and including 10 mm dia TMT bars @ 10mm centre to centre, both ways, as in reinforcement and placed over manholes at site including lift hooks complete all as specified and as directed.

Cutting into existing manholes for connecting new main pipe line, making good to pipes, rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required, internal dia of pipe 150 mm dia complete all as specified and as directed.

Demolition of stone slabs, laid bedded and pointed in any mortar and cladding tiles of any description or thickness in floors, aprons, walls, etc and removing the debris off MOD land complete all as specified and as directed.

M&L Granite (of any type) 20mm thick work (table rubbed and polished) in floors, steps, jambs, pillars, window-cills, cooking platforms over and including 20mm thick screed bed or bedding in cement mortar 1:4 including pointing in white cement 1.:2 using marble dust with admixture of pigment to match with shade of granite stone complete all as specified and as directed.

M&L 10 mm thick Zed black granite stone (superior Quality) slab (table rubbed and polished) as in wall lining (veneering to wall) and the like, over & including 10 mm thick plastering in cement mortar 1:3 including pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for making full rounding to edges of stone slabs (any type stone), such as in steps, cooking platform and other similar works and polishing complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding including backing and disposing rubbish off out side the premises complete all as specified and as directed.

M&L for 7mm to 8mm thick coloured, non skid ceramic tiles, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm (400x400mm) as in flooring & skirting, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, laid over and including 15mm thick screed in cement mortar (1:6) complete all as specified and as directed.

M&L for 8 to10 mm thick coloured glazed ceramic tiles, in vertical surfaces, as in skirting/dado etc, size 450mmx300mm set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, laid over and including 10mm thick plaster in cement mortar (1:4) matching with floor tiles including border tiles complete all as specified and as directed.

M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:0.5:2 (1 Part cement : 0.5 Part coarse sand: 2 Part coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings including taking down old grit wash/plaster complete all as specified and as directed. (Note: Providing grooves in washed stone grit plastering shall be measured and paid for separately under respective item of this Schedule.)

M&L for forming groove of uniform size 15 mm wide and 15 mm deep, in the top layer of washed stone grit plaster as per approved pattern, using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. of any description complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of walls, finished the surface fair and even without using extra cement complete all as specified and as directed.

M&L 10 mm thick plastering in cement mortar 1:4, finished even and smooth without using extra cement on ceiling surface complete all as specified and as directed.

M&L for preparation of new plastered or unplastered wall surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

M & L preparation of new wall surfaces, plastered or unplastered and applying two coats of cement base paint over a coat of white wash to walls to obtain uniform surfaces complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frames) size/area not exc. 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) size/area exc. 1.5 Sqm but not exc 4.00 Sqm each complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixing in opening complete all as per manufacturer instructions, specification, drawings and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded of any colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed.

S&F 100 mm, Stainless steel, butt hinges, medium weight, cold rolled complete all as specified and as directed.

S&F 200mm long, aluminium anodised, barrel tower bolt complete all as specified and as directed.

S&F 150mm long aluminium anodised, handle, cast type complete all as specified and as directed.

S&F in repair PTMT Grating doom 100mm dia (minimum weight 25 gms) complete all as specified and as directed.

S&F in repair white, vitreous china, wash hand basin, flat back, size 550mm x400 mm, including cutting for and pinning in end of brackets, 32 mm brass chromium plated waste fitting, including 15 mm bore CP brass, fancy type pillar tap with long screwed shanks and fly nuts flange end, bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair white, vitreous china, bowl type urinal, size 465x355x265mm (minimum) with grating and union for discharge pipe (back corner wall type), including PVC 32 mm dia, 60mm long screwed polyethylene pipe of low or high density and 15mm dia stop cock etc with pointing around urinal back in white cement complete all as specified and as directed.

S & F in repair white, Vitreous China wash down water closet pan (pedestal pattern), (excluding fixing bolts, flushing cistern and flush pipe) and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc, including S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F in repair white, Vitreous China squatting pan, "Orissa" pattern", size 580 X 440 mm, with integral footrest, (excluding flushing cistern & flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including trap set in and including lime concrete and making good to floor complete all as specified and directed.

S & F in repair one piece, white colour, Vitreous China, wash down water closet pan with jet, (including connection to drain or out going pipe and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.

S & F in repairs plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F in repairs soft close, white colour plastic water closet seat cover complete all as specified and as directed. Make-Cera, Model - Campbell, Cat No. 2398 or equivalent model of make mentioned in PS

S&F in repair 10 Litre capacity, PVC, valve less, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and as directed.

S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings, to walls/ceilings or laid in floor including taking down old water tubing complete all as specified and as directed.

S&F 20 mm bore steel water tubing, medium grade, galvanised with all fittings, to walls/ceilings or laid in floor including taking down old water tubing complete all as specified and as directed.

S&F in repair 32/38 mm dia, PVC waste pipe for WHB/Sink etc, 60 mm long, with complete fitting complete all as specified and directed.

S&F in repair PVC connection 15mm dia, 60 Cm long with PTMT nuts on both ends complete all as specified and as directed.

S&F 75 mm dia, sand cast iron, waste or vent pipe, in any length, with or without ears, fixed to walls with stack clamps, or laid in trenches or in floors including socket including taking down old pipe complete all as specified and as directed.

S&F 100 mm dia, sand cast iron, soil, waste or vent pipe, in any length, with or without ears, fixed to walls with stack clamps, or laid in trenches or in floors including socket including taking down old pipe complete all as specified and as directed.

S&F in repair 100 mm dia, cast iron traps (P or S trap) including jointing to waste pipe in cement concrete 1:2;4, type B1 using 20 mm graded stone aggregate complete all as specified and as directed.

S&F in repair 75 mm dia, cast iron nahani trap with gratings including jointing to waste pipe in cement concrete 1:2;4, type B1 using 20 mm graded stone aggregate complete all as specified and as directed.

S&F in repair 100 mm dia, cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F in repair 100 mm dia, cast iron branch piece, single (equal or unequal) ordinary or inverted (spigot or inverted) Tee, sockets, etc with oval access door if required and fitted with stack clamps, etc complete all as specified and directed.

S&F in repair MS clamp for 100 mm bore CI pipes/ PVC pipe, made out of 40mm X 6 mm flat iron and 12 mm round bars, including bolts and nuts and securing to wall in PCC 1:2:4 and making good in cement mortar 1:3 complete all as specified and as directed.

S&F in repair surgical elbow action type, single lever wall mixer, screwed down, screwed for 15 mm bore iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair surgical elbow action type, fancy type, Bib taps, screwed down, screwed for 15 mm bore iron pipe or brass ferrule complete all as specified and as directed.

Dismantling wall, ceiling boards (Fibre pulp, Insulation, AC boards, wooden boards etc) or insulation boards/slabs/composite panel, etc any thickness including existing snap grid of ceiling & cover fillets complete all as specified & as directed.

M& L for GI anodised snap grid ceiling made of Tee and angle of size 24.5 x 24.5 x1.5 mm thick, size of grid 605 x 605 mm with GI wire suspender 2 to 3 mm dia fixed with wooden/steel truss/rafter flat or slope complete all as specified and directed.

M&L for 4 mm thick E-board (designer) classic of size 595 x 595 mm, fixed to GI snap grid ceiling flat or slope complete all as specified and directed.

Dismantling of Machine pressed precast concrete interlocking paver block any shape, size and thickness complete all as specified and as directed.

Supply, spreading and levelling of fine sand (25 to 30 mm thickness ) for cushioning to interlocking paver block complete all as specified and as directed.

M&L 60mm thick, machine pressed coloured precast designed concrete interlocking paver block, M-35 grade, with grey cement and pigment, confirming to IS 15658-2006, of shape & size as directed by Engineer in Charge complete all as specified and as directed.

All as per item No 80.00 here in before but fixing only paver block retrieved from item No 78.00 here in before complete all as specified and as directed.

S&F in replacement 2 in-1 brass CP angle cock 15mm (with flange) screwed down, screwed for 15 mm bore iron pipe or brass ferrule complete all as specified and as directed.

M/S Rohit Enterprises

M/s Durga Traders

friends associeates

M/S ANIL KUMAR