REPAIR / MAINT OF ROOF SHEET, CEILING, ROOF TREATMENT, INTERNAL DRAINS INCL CLEANING OF SEWAGE LINE SOAK WELL, SEPTIC TANKS AND OTHER WORKS IN CHCC AND BASE HOSPITAL UNDER GE E/M LUCKNOW

Amount

Demolition of existing roof treatment of any type complete all as specified and directed

M & L 15mm thick screed plaster on RCC slab CM 1:4 with using water proofing compound @ 3% by weight of cement.( WPC to be measured and paid separately) complete all as specified and directed

M & L for water proofing treatment on roof surfaces in the following manner:- (a) The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg/sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr/sqm. (b) supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10 cm & 15 cm end lap weinghing not less than 3.5 kg/sqm.

M&L 230X115X40 mm thick machine pressed brick tiles with minimum thickness of joint (n.exc.) & are throughly filled with water proof polymer based joint mortar over 20 mm thick CM 1:3 complete all as specified and directed

Dismantling asbestos Cement (corrugated, semi corrugated etc) sheet in roof covering complete all as specified and directed by Engineer-in-Charge.

S&F in 0.50 mm Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting made to any shape or Semi-ciruclar any colour having tensile strength of 550 Mpa as in roof covering/ cladding complete with tapping screw complete all as specified.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M & L for 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with `L' type or `J' type hooks or cranked hook bolts complete all as specified and directed

M & L for asbestos cement two plece serrated ridge for corrugated or semi corrugated sheets fixed with `L' type or `J' type hooks or cranked hook bolts complete all as specified & directed by the EIC.

Dismantling structural steel work including doors, windows & gates but excluding framed trusses etc complete all as specified and directed by Engineer-in-Charge.

S&F Steel work in tubular trusses including special shaped washers etc. complete using ERW or induction Butt welded tubes conforming to IS 1161-1998 grade St- 240 complete all as specified and directed.

S&F Roof trusses (framed), trussed , purlins, crane gantries, rails and fastenings and heavy brackets framing (Beams, Tee, angle, channel or flat section) including distance pieces, cleats etc. of Fe 410- W (Gde- E-250) Quality A complete all as specified and directed.

M&L for preparing new steel steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles all as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed

Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water all as specified and directed.

M&L for rendering 10 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even all as specified and directed

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work surface finished even and fair without using extra cement complete all as specified and directed (Note : Integral WPC shall be measured and paid seprately )

Supply only integral WPC of approved quality complete all as specified and directed

M&L rendering 5 mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified

M&L for preparing surfaces, plastered or unplastered new surfaces of ceiling and applying three coats white wash all as specified and directed.

Preparation of newly plastered surfaces and applying two coat of oil bound disemper over one coat of oil base primer all as specified on walls surface.Incl a coat of 3mm wall care putty complete all as specified and directed

M&L Preparation of newly plastered or unplastered surfaces of walls by brooming down and priming plastered and other surfaces with cement paint primer ( before application of cement base paint) including two coats of cement base paint complete all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 15 mm bore all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 20 mm bore all as specified.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore complete all as specified

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)20 mm nominal bore complete all as specified

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

Dismantling water tank capacity exc 250 & n.exc 500 ltr and taken as credit complete all as specified and directed

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 500 litres complete all as specified and directed

Dismantling water tank capacity exc 500 & n.exc 1000 ltr and taken as credit complete all as specified and directed

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 1000 litres complete all as specified and directed

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 20mm-210gms) complete all as specified.

Taking down chowkhats or frame (wooden/aluminium) n. exc. 1.5 Sqm each with shutters (with out taking off shutters from the frame) and taken as credit all as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutter from the frames exc. 1.5 but n. exc 4 sqm each all as specified and directed.

Taking down shutters of any description n exc 1 sq.m each complete all as specified.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

S & F IInd Cl H/W plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

S&F mild steel work as in hold fasts and similar articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed

PVC door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with MS square tube, suppling & fixing in opening as per specn & drawing complete all as specified and directed

S &F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width complete all as specified

S&F 35mm thick Iind class HW, factory made kiln seasoned and chemincally pressure treated, glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars) edges of framing plain chamfered or rounded fittred with cut and mitrede beads for securing glass etc. provided with style and rails as specified in SSR part-I., complete all as specified

S&F 30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified.

M&L glazed and skeleton shuitters 30m thick of 2nd class hard wood open rebated and prepared to receive glass, gauage etc(with sash bars) in window, ventilators are provided with sytle and rails edges of framing plain, chamfered or rounded ,mitred and rebated sash bars, all as specified.

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B21 complete all as specified and directed

S&F butt Hinges, medium weight, cold rolled mild steel, 75 mm size complete all as specified.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 125 mm extruded aluminium alloy handles, fabricated type, anodised all as specified.

S&F 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed

S&F Aluminium handles, cast type anodised, 100mm long all as specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

M&L for preparing of new previously untreated surfaces of wood or wood based material over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in cement mortar complete all as specified and directed

M&L 18-20mm thick machine cut Kota stone slab flooring with marble stone strips/ slab/ tiles as per design approved, over and including cement screed bed 15mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade complete all as specified and directed

M&L 18-20mm thick machine cut Kota stone slab as in skirting /riser over cement screed bed 10mm thick in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing (Note : Screed bed will not be measurement complete all as specified and directed

S&F in repairs precast cement concrete louvers and jallies 40mm thick type B0 1:2:4 (12.5mm graded aggregate ) (measured solid) including all mouldings but excludings frame etc complete set in CM 1:6 complete all as specified and directed

Demolition of floor hearth or wall tiling including cement mortar bedding (But not backing) removeing serviceable tiles to store and rubbishoff the premises complete all as specified and directed

M&L 40mm thick cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub base all as specified and directed.

M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 15mm thick screed complete all as specified and directed (Note : Screed bed will not be measured and paid separately)

M&L Vitrified ceramic tiles 10mm thick (square/ractangular) Coloured polished tiles, area of each tile n.exc 0.38 sq m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over 15 mm thick screeding complete all as specified and directed (Note : Screed bed will not be measured and paid separately)

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10mm thick screed in CM 1:3 (Note : Screed bed will not be measured and paid separately)

Hacking out old broken glass, any thickness, size, quality, or description, from frame nexc 1.5 Sqm each pane complete all as specified and directed

S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty nexc 0.5 Sqm each pane complete all as specified and directed

S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane complete all as specified and directed

S&f for 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane complete all as specified and directed

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed

M&L Suspended ceiling, comprising 12.5 mm thick reinforced gypsum plaster boards Conforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. including finishing the exposed surfaces with Oil bound distemper two coats complete all as specified.

Providing and fixing of E-board 'Everest' make 600x600x4mm thick white prelaminated seif embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24 mm wide T-section/Angle section complete all as specified and directed

S&F in repairs Chromium plated fancy long body Bib taps with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified

S&F in repair cast iron floor trap with chromium plated grating including jointing to waste pipe wih cement mortar (75 mm bore of pipe) complete all as specified and directed

S&F in repairs Brass chromium plated shower rose without swivel joints , any size, including fixing to steel pipe or union complete all as specified .

S&F in repairs Chromium plated ,Concealed stop cock Reduced body ISI Marked, , cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified

S&F in repair CP Angle stop cock ( one way) long thread with wall flange , fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified.

S&F in repairs Pillar taps, fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe

S&F in repairs PTMT( Polytetra Methyllene Terephthalate )Bib taps suitable for 15 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified .Make : Prayag or equivalent

S&F in repairs CP Angle stop cock( two way) long thread with wall flange , screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed C complete all as specified .

S&F in repairs CP mild steel gratings suitable for 75/100 mm dia NT/ FT complete all as specified.

S&F in repairs Chromium plated Brass Tubular towel rod, of 24" (60 cm long) complete all as specified.

S&F in repair vitreous China wash down water closet pan ( padestal pattern Water Closet Cat No.20012, white) , ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc.complete all as specified and directed

S&F in repairs VC WHITE Squatting pan ,'Orissa' pattern size 580x440mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphon complete all as specified and directed

S&F in repairs Low level flushing cistern, moulded from virgin poly propylene complete all as specified and directed.

Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repairs PTMT connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F Vitreous China bowl urinal flat back, size of 465x355x265 mm White ( minimum), with grating and union for discharge pipe ( excluding flushing cistern, flush pipe , and waste pipe) , fixed in repairs including connections to flushing pipe and outgoing complete all as specified and directed

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting complete all as specified and directed

Supply only Pillar taps, cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed

Supply only 32mm bore flexible pipe of PVC fixed to WHB/ urinals as waste pipe ( not less than 600mm) including PVC coupling complete all as specified.

M&L in repairs 32 mm waste fittings , brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified fixed

S&F in repairs 32 mm bore flexible pipe of PVC fixed to WHB/ urinals as waste pipe ( not less than 600mm) including PVC coupling complete all as specified.

S&F in repair Gun metal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified.

S&F Gun metal, in repair globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified.

S & F in repair of PVC coated drapery rod of 20mm dia complete all as specified and directed

S & F brass coated knob at both ends of drapery rod of 20mm dia complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection and the like all as specified and directed.

M&L for filling joints between two panels with mix of 85/25 bitumen and sand in 1:3 complete all as specified and directed

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone agrregate) as in sub base floor etc all as specified and directed.

M&L for 40mm thick PCC type B-1 1:2:4 ( 20mm graded agg) finished fair and even using extra cement all as specified and as directed.

S & F 6 to 8 mm TMT bars in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or scruing with clips complete all as specified and directed

M&L TMT 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming Fe- 500 complete all as specified and directed

Taking down cement plaster from bricks or concrete surfaces not otherwise described including raking out joints, hacking for key and scrubing down with water etc all as specified.

Temporarily blocking of inlet of septic tanks/manhole with suitable wooden plugs/gunny bags and pumping/bailing out effluent and taking out/removing the accumulated sludge soil sewage/any other foreign/foul materials etc (solid/semisolid) from the septic tanks/manholes. complete and cleaning the septic tank/manholes with water by mechanically/manually including taking out the blocking arrangements of inlet and making the system functional all as specified and directed by E-I-C (NOTE: Depth of manhole/SOAK WELL/SEPTIC TANK exc 0.5 to 1.5M from below GL)

Temporarily blocking of inlet of septic tanks/manhole with suitable wooden plugs/gunny bags and pumping/bailing out effluent and taking out/removing the accumulated sludge soil sewage/any other foreign/foul materials etc (solid/semisolid) from the septic tanks/manholes. complete and cleaning the septic tank/manholes with water by mechanically/manually including taking out the blocking arrangements of inlet and making the system functional all as specified and directed by E-I-C (NOTE: Depth of manhole/SOAK WELL/SEPTIC TANK exc 1.50M to 4.50M from below GL)

Temporarily blocking of sewage line 150 mm bore with suitable wooden plugs/gunny bags and cleaning the same by rod-ding and removing the sludge alongwith brick bats/stones/broken bottles/any other foreign materials etc complete and cleaning the sewage line with water by mannually/mechanilly as directed by EIC, and taking out the blocking arrangements of inlet and making the system functional all as specified and directed for following size of pipe lines

All as per item No 110 above but 250 mm bore

All as per item No 110 above but 300 mm bore

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes,etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified.

Excavating in trenches, exceeding 1.5 m wide and not exceeding 3.0 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes,etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified.

Excavating in trenches, exceeding 3 m wide and not exceeding 4.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes,etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for all forming branch channel (1/2) round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching complete all as specified and directed

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/ loose soil complete all as specified.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Excavation in trenches in any type of soil n.exc 1.5 m wide & n.exc 1.5 m deep in any kind of soil: for foundation etc., or for shafts, wells, cesspits, manholes, pier holes,not exceeding 10 sq.m on plan and geeting out. Note : The road/ pavements occured during alignment of sewer lines the cutting portion shall be make good with PCC 1:2:4, type B2,150mm thick over 150mm thick hardcore over rammed earth. The cost PCC and hardcore will be measured and paid separately.

Use and waste of timbering as planking and strutting for excavations in trenches in soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal exc 1.5m & n exc.3m complete all as specified and directed

PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed

PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in drains / surface channel complete all as specified and directed

EXTRA FOR forming fair finished channel 30 cm inner girth in cement concrete using extra cement incl forms, moulds mitred/stopped ends complete all as specified and directed

PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping and the like including weathering, slightly rounded or chamfered angles with & incl necessary use and waste of form work for fair faces of concrete complete all as specified and directed

Mild steel work (ordinary grade Fe-310/410-0) as in small articles like angle iron framing work for manhole, rungs/steps in man hole complete all as specified and directed

15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without extra cement, cement mortar mixed with WPC @ 3% of weight of cement Note: WPC measured & paid for separately

Treating small articles of steel like MS rungs etc with coal tar black paint icl preparation of surface, area tarred not exc 0.1 sqm complete all as specified and directed

Two coats of black bitumenous paint over a coat of red oxide zinc chrome primer including preparation of new steel surface not exceeding 10 cm width/girth complete all as specified and directed

PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed concrete to SGSW pipes of 300 mm bore dia incl packing under & haunching against the sides of pipes after they are laid & tested complete all as specified and directed

PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 200 mm bore dia incl packing under & haunching against the sides of pipes after they are laid & tested complete all as specified and directed

PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 150 mm bore dia incl packing under & haunching against the sides of pipes after they are laid & tested complete all as specified and directed

PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 300 mm bore dia incl packing under & completely surounding pipes with conrete after they are laid and tested complete all as specified and directed

PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 200 mm bore dia incl packing under & & completely surounding pipes with conrete after they are laid and tested complete all as specified and directed

PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 150 mm bore dia incl packing under & & completely surounding pipes with conrete after they are laid and tested complete all as specified and directed

Salt-glazed stone ware drain (SGSW) pipe grade 'A' 150 mm bore dia laid in trenches & jointed in CM 1:1 complete all as specified and directed

Salt-glazed stone ware drain (SGSW) pipe grade 'A' 200 mm bore dia laid in trenches & jointed in CM 1:1 complete all as specified and directed

Salt-glazed stone ware drain (SGSW) pipe grade 'A' 300 mm bore dia laid in trenches & jointed in CM 1:1 complete all as specified and directed

M&L 150mm PCC 1:2:4 type B2 using 40mm graded aggregate laid over 150mm th hardcore of broken boulders of gauge exe 63mm but n exe,100mm deposited, spread and levelled in layers n exc 15 cm thick watered and rolled/ rammed to a true surface over rammed earth as in road/pavement cutting , all as directed.

M&L RCC M30 design mix as in slabs suported on walls,beams and coluumns in floors, roofs, landings, balconies, canopuies, deck slabs and shelves and the like ans coumns fair finished in necessary provision for opening Man hole and precast cover slab complete all as specified and directed

M&L use and waste of form work to soffits os suspended slabs such as roof slabs, floor slabs, landings and similar work; not eceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

M&L use and waste of formwork to faces of walls, retaining walls, aboutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc: vertical or to batter fair finished complete all as specified and directed

Cast iron 150mm dia pipes S/S including specials Class LA supplied and laid and fixed in RCC Flush Out Tanks as directed.

Cutting salt -glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cemnet mortar 1:1 for 150mm dia SGSW pipes, all as directed.

M/s J C Oberoi

pratap associates

M K Engineers and Contractors