Balance work of Construction of Community Center at Gullerwala Karsoli GP Karsoli Mohal (PMK/2024/41)

Excavation in foundations, trenches etc., in earth work,i lift upto 1.50 mtr. height, stacking the eacavated soil not more then 3 mtr. clear from the edge of excavation and then returning the stacked soil in 15cm. (fifteen centimeter) thick layers, when required in to plinth, sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per direction of Engineer-in-charge within all leads and lifts.

Providing and laying cement concrete 1:6:12. (One cement: six sand : twelve graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth . including all leads and lifts and carriage of materials and other incidentals.

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire up to floor two level including carriage of materials within all leads and lifts and other incidentals.

Providing and laying cement concrete work 1:1.5:3 (1 Cement:1.5 Sand:3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.

Providing and laying cement concrete work 1:1.5:3 (1 Cement:1.5 Sand:3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Columns, pillars, posts and struts Square, rectangular or polygonal in plan.

Providing and laying cement concrete work 1:1.5:3 (1 Cement:1.5 Sand:3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor two level.

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement. 40 mm thick

Providing and fixing Glass strips in joints in floors 40 mm wide and 4 mm thick

Providing form work with steel plates 3.15mm ( three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm ( thirty x thirty x five millimetre).so as to give a fair finish including centering, shuttering, strutting and propping etc. in any height/depth of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in :- Foundation footings and bases of columns etc and mass concrete.

Columns, pillars, posts and struts Square, rectangular or polygonal in plan.

Beams, cantilever, girders, and lintels, sides and soffits of beam, beam haunchings, cantilever, bressumers and lintels not exceeding 1 Mtr. In depth

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto 200mm. in thickness.

Edges of slabs and breaks in floors and walls: Under 20 cm. wide.

Brick work using 2nd Class common burnt clay building bricks in super structure upto all floor level in cement mortar 1:6 (one cement :six sand) including carriage of materials within all leads and lifts and other incidentals.