CA NO GE/AFJ-26/2024-25 REPAIR PAINTING AND POLISHING OF WOODEN FURNITURES AT AFS JAMMU UNDER GE AF JAMMU

Amount

Taking down worned out/unsv components of the following wooden furniture items, Supply and Fix new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge

BED PLYTOP WOODEN (FD 246/247)

Head rest as shown on drawing

Foot Rest as shown on drawing

Long rail made of Ist class hard wood

Short rail made of Ist class hard wood

Stiffener made of Ist class hard wood

Right angled MS bracket 200mm long x 25mm wide x 3mm thick duly fixed with screw

12mm thick BWR Ply wood top in one piece

CHAIR DINING (FD-203/279)

Rear Leg

Front Leg

Side rail with holes for weaving (spacing of holes shall be as per old one)

Front/back rail with holes for weaving (spacing of holes shall be as per old one)

Bottom stiffener

Back stiffener

Provn of four Nos of wooden tringular bracket of size 75mm x 75mm to each chair made out 25mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge.

PVC/Rubber Shoe as per sample approved

Re-canning of Chair dining as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-Charge.

CHAIR WRITING (FD-261/280)

Rear legs

Front Legs

Side rail with holes for weaving (spacing of holes shall be as per old one)

Front/back rail with holes for weaving (spacing of holes shall be as per old one)

Bottom stiffener

Back stiffener

Arm rest

Provn of four Nos of wooden tringular bracket of size 75mm x 75mm to each chair made out 25mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge.

PVC/Rubber Shoe as per sample approved

Re-canning of Chair Writing as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-Charge.

CHAIR EASY(FD-229) -

Rear Leg

Front Leg

Side Rail

Front/Back Rail

Back Stiffener

Bottom Stiffner

Arms rest

PVC/Rubber Shoe as per sample approved

Re-canning of Chair easy as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-Charge.

TEAPOY (FD-278/382)

Long rail

Short rail

Side stiffener

Centre stiffener

Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.

PVC/Rubber Shoe as per sample approved

Provn of eight Nos of wooden tringular bracket of size 75mm x 75mm to each teapoy made out 30mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge.

PEG TABLE (FD-236/277/384)

Long rail

Short rail

Side stiffener

Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.

PVC/Rubber Shoe as per sample approved

TABLE 900mm x 600mm WITH DRAWER and WITHOUT DRAWER (FD-283/284)

Long Rail

Short Rail

Bottom Side stiffener

Bottom Centre stiffener

Drawer made out prelaminated MDF board and 6mm thick commercial ply at bottom and fitted with one 100mm chromium plated handle

Provn of six Nos of wooden tringular bracket of size 75mm x 75mm to each Table made out of 25mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.

PVC/Rubber Shoe as per sample approved

TABLE DRESSING LADIES (FD-251/378/395)

5mm thick Mirror of size 365mmx1220mm with Back ply of 6mm thick commercial plywood and wooden frame of existing shape & size.

Sliding glass shutter of 3mm thick as per existing.

Drawer of 6 mm thick ply wood commercial with 18mm pre-laminated MDF board as per existing shape and size

Knob as per sample approved

TABLE BED SIDE (FD-248 /276)

Top 18/19mm thick both side prelaminated MDF board fixed with PVC edge band tape

Side made of 18/19mm thick both side prelaminated MDF board fixed with PVC edge band tape

Shelf made of 18/19mm thick both side prelaminated MDF board fixed with PVC edge band tape

Bottom made of 18/19mm thick both side prelaminated MDF board fixed with PVC edge band tape

Back shall be made of 6mm thick ply wood commercial as per existing shape and size and shown in drgs and directed

Leg frame with 4 Nos leg and stiffener as per drawing made Ist class hard wood (teak) duly french polished.

TABLE CENTRE (FD-274/375)

Long rail

Short rail

Side stiffener

Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.

PVC/Rubber Shoe as per sample approved

TABLE DINNING FOR 6/ 8 PERSONS (FD-376,FD-30 & FD-239): The following repairs shall be carried out to table Dining for 8 persons after removing old unserviceable parts:-

Supply and fixing of top of the table made out of particle board 18mm thick with 1mm prelaminated exterior grade with teak wood ebeading all-round duly polished. as per drawings.

Supply and fixing of legs of seasoned teak wood of the table as per drawings.

Supply and fixing of long rails of seasoned teak wood of the table as per drawings.

Supply and fixing of side rails of seasoned teak wood of the table as per drawings

Supply and fixing of seasoned teak wood corner size 100x100mm to the table between legs and rail fixed with screw .

TABLE DRESSING GENTS(FD-230/379)

Looking glass complete with frame and back ply. As per drawing Make- Saint Gobin/ Gold Plus

SOFA SET (FD-281/373)

Foam cushion for sofa set size 525x525x100mm, 40 density, Make-Sleepwell duly covered with best quality tapestry cloth as approved by Engineer-in-Charge complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 250/- per RM

CHAIR COMPUTER (FD/E6/MAP/01)

Replacement of complete seat with new moulded foam cushioned 40mm density as shape and size covered with tapestry cloth as approved along with PVC liping all round, complete all as specified

All as per item No 13(a) here-in-before but for back frame

Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified

Pedestal assembly complete

Twin wheels coasters (set of five) press fitted at the bottom of leg.

Side board (FD-26,FD-371,& FD-372) The following repairs shall be carried out to the side board after removing the old unserviceable parts :-

Provision and replacement of sides of the side prelaminated particle board 18mm board veneered.

Provision and replacement of drawer complete made of deodar wood with pre-laminated particle board 18mm thick on front and plywood 6mm thick commercial quality at the bottom.

Provision and replacement of doors of the side board made of pre-laminated board 18mm thick with teakwood edging door fixed with piano hinges.

Provision and replacement of top made out of pre-laminated particle board 18mm thick.

Provision and replacement of bottom frame made of hard wood fixed with screws all as shown on drawings.

Provision and replacement of hard wood legs of side board all as per drawings.

Provision and replacement of CP knobs 32mm in brown colour as per sample

Table Computer FD/E6/MAP/03

Provision and replacement of top 18mm Thick Pre laminated Partical board as per drawings.

Provision and replacement of18mm Thick Pre laminated Partical board drawer 75mm deep on telescopic channel as per drawings.

Provision and replacement of18mm Thick Pre laminated Partical board key board tray on telescopic channel as per drawings.

Provision and replacement of 25 mm thick sqare pipe side support of Table computer as per drawings.

Provision and replacement of legs with nylon buffer of Table computer as per drawings.

Table Bed side MAP

Provision and replacement of drawer on 18mm Thick Pre laminated Partical board with telescopic channel as per drawings .

Provision and replacement of 18mm Thick Pre laminated Partical board top with PVC edging fixed to frame (25mm projection on three spaces) as per drawings.

Provision and replacement of 18mm MS square pipe(500mmx450mm) (18 gauge) black powder coated as per drawings.

Provision and replacement of handles as per drawings and sample apporoved by Engr-in-charge.

Polishing of Wooden Furniture Items : All wooden surfaces of the following wooden furniture items wheather exposed to view or not when placed in position shall be polised with high gloss french polish to be finished as directed by Engineer-in-Charge duly preparation of surface with emery paper and applying putty as and where required.

Bed Plytop wooden - FD 246

Chair Dining FD-228/270/279

Chair Writing FD/261/280

Chair Easy FD-229

Teapoy (FD-278/382)

Peg Table (FD-236/277/384)

Table Writing (FD-275)

Table 900x600mm with drawer and without drawer

Table Dining 6 presons (FD-239/273)

Table Centre FD-274/375)

Sofa Set 4 Seater (FD-281/373)

Sofa Set 5 Seater (FD-281/373/FD/MAP-II/02)

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

JAINCO STEEL INDUSTRIES (BID ID -3079654)